Boost meant point.

[Matt@CodeRedMotorsports]

Morning guys, we need a measurement device fitted to a 5. Really need to measure at the LOWEST point, between turbo and the manifold, believe me there is a method to the madness....
Matt

Just to add I remember the cups had them plumbed into the manifold on one of the runners.

[Andrew Cooke]

I'd have thought the lowest was the manifold itself, if you can't use that there is a port in the carb above the butterfly but below the venturi.

[Mart]

The aei feeds off the manifold throat outlet, or if you're not running the o.e breather setup, there's an outlet option there (where the breather nrv was).

[Matt@CodeRedMotorsports]

The cars have to have a pressure gauge plumbed 'down stream of the turbo', to measure boost levels, on a shrader valve, much like a cyl compression guage.
We are trying to find the best place for it, taking into consideration possible boost spikes and worse case, a minor back fire into the manifold.
Ta, matt.