Mitsi Lancer Evo Turbocharger

[Matt Cole]

Can anyone offer the specification and power capability of the turbos as fitted to the evo's 7, 8 and 9's? I think they are TD05 twin scroll or some variant. Any info greatly appreciated. :agree:

[philg]

Can anyone offer the specification and power capability of the turbos as fitted to the evo's 7, 8 and 9's? I think they are TD05 twin scroll or some variant. Any info greatly appreciated. :agree:

Can not give great info regarding sizes etc, but from what i remember, the 7 and the 8 had the same turbo, the 8 mr would make more power, larger exhaust housing i think, not sure on the 9s.

Loads of people pulling 400hp some with a little more.

Not much help mat but a start :)

Im sure some of the rtoc evo boys will confirm

[Matt Cole]

Cheers Phil, the fact that 400bhp is mentioned sounds like the turbo units are capable.:agree:

[philg]

Evo 7 and 8 ran a smaller 9.8 elbow quicker spool and the 8 mr ran a 10.5 bigger power also the 8mr have a titanium wheel.

After a quick search the evo 9 turbo seems better again :)

[philg]

My car made 370hp with 1.5 bar :)

[philg]

here you go mat

I notice that every week it gets asked what turbo do i have.
this is a comprehensive list as I can make/find
this site also helps http://www.mitsubishi-turbos.co.uk/M...ochargers.html (http://www.mitsubishi-turbos.co.uk/Mitsubishi_Lancer_Turbochargers.html)

perhaps a mod can make this a sticky as it gets asked so often


49177 = TD04
49178 = TD05
49179 = TD06.

49178-01410 = 14B
49178-05200 = Small 16G
49178-01420 = Big 16G
49178-01450 = Evo1 16G
49178-01460 = Evo2 16G
49178-01470 = Evo3 16G


DO4-9B-6CM2 265 CFM
TDO5-12A-8CM2 320 CFM
TDO4-13G-5CM2 360 CFM
TEO4-13C-6CM2 360 CFM
TDO4L-13G-6CM2 360 CFM
TDO4L-15C-8.5CM2 390 CFM
TDO5H-14B-6CM2 405 CFM
TDO5H-14G-8CM2 465 CFM
TDO5H-16G-7CM2 505 CFM
TDO5H-16G-10CM2 505 CFM
TDO6-17C-8CM2 550 CFM
TDO6H-20G-14CM2 650 CFM
TDO7S-25G-17CM2 850 CFM
TFO8L-30V-18CM2 1200 CFM

Max Output:
TD05-14B (stock 1st gen) 275-300hp @ 21 psi
TD05-16G (small) 345-365hp @ 22 psi
TD06-16G (large) 365-385hp @ 22 psi
TD06-20G 430-450hp @ 22 psi
T25 (stock 2nd gen) 235-250hp @ ?? psi
T3 (super 60)/T2.5 hybrid 265-280hp @ ?? psi
T3 (super 60)/T2.8 hybrid 270-320hp @ ?? psi

Evolution 1
Turbo = TDO5H–16G-7
Nozzle Area (cm2) = 7
Exhaust turbine = Inconel (steel alloy)
Compressor = Aluminium, 60mm wide

Evolution 2
Turbo = TDO5H–16G-7
Nozzle Area (cm2) = 7
Turbine = Inconel (steel alloy)
Compressor = Aluminium, 60mm wide


Evolution 3
Turbo = TD05H–16G6-7
Nozzle Area (cm2) = 7
Turbine = Inconel (steel alloy)
Compressor = Aluminium, 68mm wide


Evolution 4
Turbo = TD05HR-16G6-9T
Nozzle Area (cm2) = 9
Turbine = Inconel (steel alloy)
Compressor = Aluminium, 68mm wide


Evolution 5
Turbo = TD05HR-16G6-10.5T (GSR)
TD05HRA-16G6-10.5T (RS)
Nozzle Area (cm2) = 10.5
Turbine = Inconel (steel alloy), Titanium alloy (RS)
Compressor = Aluminium, 68mm wide


Evolution 6
Turbo = TD05HR-16G6-10.5T (GSR)
TD05HRA-16G6-10.5T (RS/rs2)
Nozzle Area (cm2) = 10.5
Turbine = GSR - Inconel (steel alloy), Titanium alloy (RS/RS2)
Compressor = Aluminium, 68mm wide


Evolution 6 : Tommi Makinen Edition
Turbo = TD05RA-15GK2-10.5T (GSR)
TD05HRA-16G6-10.5T (RS/rs2)
Nozzle Area (cm2) = 10.5
Turbine = Titanium alloy for both RS/RS2/GSR!
Compressor = Aluminium, 65mm (gsr) - 68mm(rs) wide


Evolution 7
Turbo = TD05HR-16G6-9.8T (GSR)
TD05HRA-16G6-9.8T (RS/RS2)
Nozzle Area (cm2) = 9.8
Turbine = GSR - Inconel (steel alloy), RS/Rs2=Titanium alloy
Compressor = Aluminium, 68mm wide


Evolution 7 GTA
Turbo = TD05-15GK2-9.0T
Nozzle Area (cm2) = 9.0
Turbine = Inconel (steel alloy)
Compressor = Aluminium, 65mm wide


Evolution 8
Turbo = TD05HR-16G6-9.8T (GSR / USDM)
TD05HRA-16G6-9.8T (RS/RS2 & NZDM) or 6MT:TD05HRA-16G6-10.5T (model unknown)
Nozzle Area (cm2) = 9.8
Turbine = USDM EVO 8 & JDM GSR =Inconel (steel alloy),
RS=Titanium alloy.
Compressor = Aluminium, 68mm wide

Evolution MR aka "8.5"
GSR = TD05HR-16G6-10.5T or TD05HRA-16G6-10.5T (Ti Alloy option)
RS = 6MT:TD05HRA-16G6-10.5T or 5MT:TD05HRA-16G6-9.8T
Nozzle Area (cm2) = 10.5 or 9.8(RS-5speed)
Compressor = Aluminium, 68mm wide


Evolution 9
USDM & JDM = TD05HRA-16G6C-10.5T
Turbine: GSR / GT = Inconel alloy, RS = Titanium alloy
Compressor: GSR / GT = Aluminium, RS = Magnesium Alloy
(??) mm wide (to be verified.)

Nozzle Area (cm2) = 10.5 (note: to be confirmed that RS 5MT has 10.5)

RS E9 turbo part number 1515A059 (approx cost 250,000 yen from Mitsi Japan). *Warning* There are reports of RS magnesium compressor wheel failing if boosted above stock boost.