PDA

View Full Version : whats the best stem seals to use !


raider_gtt
14-02-2011, 15:28
whats the best stem seals to use! i bought the ones from k-tec and they dont fit
or would i be best getting them from renalt main dealer
phase i 16 v turbo
14-02-2011, 15:33
I stock the OE ones and the aftermarket ones.
raider_gtt
14-02-2011, 15:38
I stock the OE ones and the aftermarket ones.

mike whats the best ones to us buddie i have the white one from k-tec but they dont fit they are to big
James5
14-02-2011, 15:43
I use vauxhall 2 litre 16v red top engine valve stem seals much better than the OE white click type, and you get 2 sets for the price of 1 set being of a 16v:D

http://t3.gstatic.com/images?q=tbn:ANd9GcS5HxagBT8Khfbw_aH_SlY65NJtxuOc2 TFpPyNMzeviLMqMS2T6oHNAPTI (http://www.vauxhall-car-parts.co.uk/acatalog/90180294_1.jpg)
raider_gtt
14-02-2011, 15:46
I use vauxhall 2 litre 16v red top engine much better than the OE click type, and you get 2 sets for the price of 1 set:D

http://t3.gstatic.com/images?q=tbn:ANd9GcS5HxagBT8Khfbw_aH_SlY65NJtxuOc2 TFpPyNMzeviLMqMS2T6oHNAPTI (http://www.vauxhall-car-parts.co.uk/acatalog/90180294_1.jpg)

were from james whats the cost
djinuk
14-02-2011, 16:09
when you say they dont fit , im sure i remember somebody saying they were always very loose.
James5
14-02-2011, 16:20
You could try Vauxhall:D or ebay

http://cgi.ebay.co.uk/VAUXHALL-REDTOP-C20XE-C20LET-VALVE-STEM-SEALS-x16_W0QQitemZ140385730521QQcmdZViewItem?rvr_id=210 258588039&rvr_id=210258588039&cguid=24f751c112e0a47a43e16751ffedcade

or Mike for OE type if you prefer
markey b
14-02-2011, 16:35
i dont run any... i just live with a puff of smoke on startup :agree:
Shakes
14-02-2011, 16:40
i dont run any... i just live with a puff of smoke on startup :agree:
Do you get alot of smoke mark?
mines smokes untill it gets 3/4's the way up temp gauge then stops.
not sure if its stem seals or piston rings.
HAndy
14-02-2011, 17:37
i dont run any... i just live with a puff of smoke on startup :agree:

yep i agree marky b, deffo if you intend to rev the engine hard , nothing worse than bits of valve stem oil seals floating around in your engine:wasntme:
Brigsy
14-02-2011, 17:46
I dont run any stem seals either. Aslong as your valve guides arent too worn it will be fine.
markey b
14-02-2011, 18:00
Do you get alot of smoke mark?
mines smokes untill it gets 3/4's the way up temp gauge then stops.
not sure if its stem seals or piston rings.

just a puff on startup, no more than that :agree:
Dave Reed
14-02-2011, 18:14
I dont run any stem seals either. Aslong as your valve guides arent too worn it will be fine.


what Brigsy said :agree:
J$£5GTT
14-02-2011, 20:03
mike whats the best ones to us buddie i have the white one from k-tec but they dont fit they are to big

i didnt have a problem...if anything they needed a little force to put on...
and i actually done mine an not by word of mouth heard they were crap..
like most things on here....'oh this dont fit'...that turbo is gash'.....etc..
:D
tubbyG
14-02-2011, 21:09
I have a brand new set of ktec ones for sale, tenner posted!
Tony Walker
14-02-2011, 21:44
cgb uprated were exactly the same as i got from renault standard.
Sparkie
14-02-2011, 22:02
r14480 from gsf.... std renault ones. made by corteco.
raider_gtt
21-02-2011, 18:59
I use vauxhall 2 litre 16v red top engine valve stem seals much better than the OE white click type, and you get 2 sets for the price of 1 set being of a 16v:D

http://t3.gstatic.com/images?q=tbn:ANd9GcS5HxagBT8Khfbw_aH_SlY65NJtxuOc2 TFpPyNMzeviLMqMS2T6oHNAPTI (http://www.vauxhall-car-parts.co.uk/acatalog/90180294_1.jpg)

any body got the vauxhall part number for these ??????