wheel bolt torque setting?

[raj]

what should i be torquing alloy wheel bolts up to.?

[jamie_8]

what should i be torquing alloy wheel bolts up to.?

not sure on a 5, but most small cars like clio's, fiesta's ect are about 90n/m. If in doubt you could get away with doing them at 110n/m :)

[dangerous dave]

not sure on a 5, but most small cars like clio's, fiesta's ect are about 90n/m. If in doubt you could get away with doing them at 110n/m :)

110nm is what i do.. FT is great and all but being the big strapping young man i am, i snapped one or two.. i'd avoid that unless you have a trained arm that has a nm setting..:)

[Smokey]

as tight as I can get them buy hand :cooter:

Do people actually measure the torque settings surely not everyone does this

[jamie_8]

110nm is what i do.. FT is great and all but being the big strapping young man i am, i snapped one or two.. i'd avoid that unless you have a trained arm that has a nm setting..:)

you want to leave those krispy kremes alone..:coffee:

[dangerous dave]

as tight as I can get them buy hand :cooter:

Do people actually measure the torque settings surely not everyone does this

if there is one available then i will always.. if not i trust myself anyway.. :)

hey, its not all chuck:cry:

[car.crash]

as tight as I can get them buy hand :cooter:


this is why i orderd 16 new bolts, 20 years of ft has taken its toll on the originals

[raj]

thanks for the info, i'll do mine to 100nm:agree:

[LYNCHSTAR]

thanks for the info, i'll do mine to 100nm:agree:

90nm checked mine at mates garage yesterday.