Tubular Manifolds

[UnstableCable]

I have seen these manifolds going around, they seem to be made by a company called raceline and are all over europe ebay although I see cgb sells em for £169 + P&P.
http://www.cgbmotorsport.net/cgb-tubular-stainless-steel-exhaust-manifold-985-p.asp

On europe ebay the cheapest I could find was €159 + €15 postage which is about £150 in total! which is a bargin really compared to the likes of Ktec etc!

So being a bit cheeky I decided to email a few of the sellers and see what they could do for a bulk purchse and the best I got was €1400 delivered for 10 manifolds! :eek:

Thats €140 per manifold or £121 each, the only problem being that he wants to send to one person so they would then need distributing over here which could be done for around £6 so would be £127 in total per manifold!

I dont know if any body has tried these and can say what they are like but they certainly look good in the picture! (To me anyway!)

Havent figured out the finer details of how to pay etc but will get round to that once I get a idea if anybody is interested?

[UnstableCable]

Another link with better pictures.

http://cgi.ebay.co.uk/TopClass-Edelstahl-Faecherkruemmer-Renault-R5-GT-turbo_W0QQitemZ280608244153QQcategoryZ61410QQcmdZV iewItemQQ_trksidZp4340.m263QQ_trkparmsZalgo%3DDLSL %252BSIC%26its%3DI%26itu%3DUCI%252BIA%252BUA%252BI EW%252BFICS%252BUFI%252BDDSIC%26otn%3D8%26pmod%3D3 20644677263%252B320644677263%26po%3D%26ps%3D63%26c lkid%3D6708583545468648569

[Logg]

Wow cracking price dude.

How hard would it be to convert one of these manifolds to twin scroll? As I could be tempted to buy one and get it converted.

[JRP]

Thats pretty cheap tbh :)

[rat1]

oh great :sad2: i've just got one off cgb a week ago on sale for £185 +£12 p&p. thay do look very well made though

[modfather]

i like the manifold. i may be up for getting 1. it would be good to see if any1 has used these before

[HAndy]

would imagine there what all the tuners are selling,


defo help with spooling , noticed a 300 rpm improvement when fitted over oe item:)

[scott 5gtt]

I bought one of these raceland manifolds a while back really good build quality had no bother with mine bit of a chew fitting though getting a spanner in to a couple of nuts easier with the head off. I heat wrapped mine though so it did make it a bit tighter to get into. Oh and I had to do a slght bit of grinding to get it to fit perfect but for the price ya can't go wrong think I paid 120 from them direct

[Penfold aka The Dealer]

Its defo a good price, Perhaps its something the club can look into getting if there is enough interest...

[UnstableCable]

Glad to see theres lots of interest and would be great if the club could get involved!

Guess start a list then and see how many we come up with? I want one so

1. Unstablecable

[Logg]

1. Unstablecable
2. Logg

[djinuk]

1. Unstablecable
2. Logg
3. Djinuk

[JRP]

1. Unstablecable
2. Logg
3. Djinuk
4. Jrp

[phase i 16 v turbo]

These all come from one supplier, that the other companies then sell on.

[modfather]

1. Unstablecable
2. Logg
3. Djinuk
4. jrp
5. modfather

[jamie_8]

1. Unstablecable
2. Logg
3. Djinuk
4. jrp
5. modfather
6. jamie_8

[Thundercat]

1. Unstablecable
2. Logg
3. Djinuk
4. jrp
5. modfather
6. jamie_8
7. 5279

[tubbyG]

thats an awesome price for what you get!
I bought one from CGB last year. £200 all in. The build quality is excellent, it does look mint! cant say that I noticed much of a gain on spool up tho, maybe a 100 or 2 rpm for full boost difference but whats that!
but I did notice that while cruising that there was a much quieter/smoother note from the exhaust....untill the foot goes down:cool2:

[dangerous dave]

1. Unstablecable
2. Logg
3. Djinuk
4. jrp
5. modfather
6. jamie_8
7. 5279
8. Dangerous dave... :)

[Ian S]

Its defo a good price, Perhaps its something the club can look into getting if there is enough interest...I think so too.

Maybe the club could buy the last couple if need be to make up the number?

And buyers perhaps could pay the shop as has happened before?

[Ian S]

These all come from one supplierDo you know who?

Can we buy them direct from them? For less than the quoted €1400?

Will it annoy them if we then sell them to members for less that what seems to be the retail of £170?


Perhaps we could keep a couple for the shop??

[DaveMayGTT]

Wow cracking price dude.

How hard would it be to convert one of these manifolds to twin scroll? As I could be tempted to buy one and get it converted.

I asked the same question about these from ktec in another thread. Found any info logg?

[Ian S]

The man you want to ask about such a conversion is Big Jim Racing who made those 5GTT big exhaust pipes for after the turbo: http://www.bigjimracing.co.uk/home.html

He actually made those pipes himself, not just got them made.
(http://www.bigjimracing.co.uk/images/01052009338.jpg)

[Ian S]

Anyway, I asked the other year about something for my Fiat and he wouldn't make a manifold for the kind of price being talked about here, ie, £121. Not even for double that.

[Logg]

I asked the same question about these from ktec in another thread. Found any info logg?


I think when Looking for a twin scroll turbo for the little GTT an oe turbo from an other car will have to be used. As all the garrett turbos seem to be for over 400hp. So that'll mean looking at using either and Evo, Scooby or Megane turbocharger. But so far I've only found Evo flanges for sale.

http://cgi.ebay.co.uk/Mitsubishi-EVO4-9-EVO10-Turbo-Inlet-Manifold-Flange-/370475163579?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item56420a5fbb

[rs250nut]

I asked the same question about these from ktec in another thread. Found any info logg?

Find out which of the four cylinders complement each other, I.e one and four two and three and then divide the collector by welding in a plate, not sure if it would be possible on a manifold that was finished unless your willing to chop the collector off. You may have to rotate the flange also which could not be ideal for turbo placement.

[kial]

New poster! (less than 10 posts)


1. Unstablecable
2. Logg
3. Djinuk
4. jrp
5. modfather
6. jamie_8
7. 5279
8. Dangerous dave... :)

9. kial

[lee1707]

New poster! (less than 10 posts)



9. kial

10. Lee1707

[Tony Walker]

1. Unstablecable
2. Logg
3. Djinuk
4. jrp
5. modfather
6. jamie_8
7. 5279
8. Dangerous dave... :)
9. kial
10. Lee1707
11 Tony=possibly what sort of discount with this many buyers??

[Danboi2]

1. Unstablecable
2. Logg
3. Djinuk
4. jrp
5. modfather
6. jamie_8
7. 5279
8. Dangerous dave... :)
9. kial
10. Lee1707
11 Tony=possibly what sort of discount with this many buyers??
12. Danboi2

[Penfold aka The Dealer]

1. Unstablecable
2. Logg
3. Djinuk
4. jrp
5. modfather
6. jamie_8
7. 5279
8. Dangerous dave... :)
9. kial
10. Lee1707
11 Tony=possibly what sort of discount with this many buyers??[/I]
12. Danboi2
13. Penfold, lucky 13 :-)

[UnstableCable]

Wow! Chuffed with all the interest in these!

I have some great news as well, I have emailed the the chap again to enquire about larger quanties than 10 as we have smashed 10 now!

This is his response

0-10 manifolds €140 each
10-15 maniollds €130 each
15-20 manifolds €126 each (£109)
20+ manifolds €121 each (£104)

So as the list goes there looking at €130 a manifold!!:eek: (£113) :smokin:

So guess we just need sort out whos collecting the monies to pay for them? Im off on hols on the 12th so dont really want to be dealing with this and then disappearing for 3 weeks leaving everyone in the lurch.
So can i pass the details onto some one who can take the money etc and accept delivery then redistribute them?

[Smokey]

Im with Tony


1. Unstablecable
2. Logg
3. Djinuk
4. jrp
5. modfather
6. jamie_8
7. 5279
8. Dangerous dave... :)
9. kial
10. Lee1707
11 Tony=possibly what sort of discount with this many buyers??
12. Danboi2
13. Penfold, lucky 13 :-
14 Mat = possibly what sort of discount with this many buyers??

[BigDanC]

1. Unstablecable
2. Logg
3. Djinuk
4. jrp
5. modfather
6. jamie_8
7. 5279
8. Dangerous dave... :)
9. kial
10. Lee1707
11 Tony=possibly what sort of discount with this many buyers??
12. Danboi2
13. Penfold, lucky 13 :-
14 Mat = possibly what sort of discount with this many buyers??
15. Bigdanc

[modfather]

Wow! Chuffed with all the interest in these!

I have some great news as well, I have emailed the the chap again to enquire about larger quanties than 10 as we have smashed 10 now!

This is his response

0-10 manifolds €140 each
10-15 maniollds €130 each
15-20 manifolds €126 each (£109)
20+ manifolds €121 each (£104)

So as the list goes there looking at €130 a manifold!!:eek: (£113) :smokin:

So guess we just need sort out whos collecting the monies to pay for them? Im off on hols on the 12th so dont really want to be dealing with this and then disappearing for 3 weeks leaving everyone in the lurch.
So can i pass the details onto some one who can take the money etc and accept delivery then redistribute them?

i dont mind taking delivery of them and sort delivery to other members :)

[kial]

New poster! (less than 10 posts)

who ever is taking control of money/delivery ect just to let you kno i live in jersey, channel islands so if you could find out postal price and ill pay that bit extra..:) thanks

[Steven Leece]

New poster! (less than 10 posts)

1. Unstablecable
2. Logg
3. Djinuk
4. jrp
5. modfather
6. jamie_8
7. 5279
8. Dangerous dave... :)
9. kial
10. Lee1707
11 Tony=possibly what sort of discount with this many buyers??
12. Danboi2
13. Penfold, lucky 13 :-
14 Mat = possibly what sort of discount with this many buyers??
15. Bigdanc
16. Steve Leece - (IOM member, as with Kial will have to pay bit extra postage)

[djinuk]

would the rtoc shop maybe not buy a number of these, there somthing i imagine would sell on pretty easially at that kind of price.

[DaveMayGTT]

If the shop can get some in i would have one in a few months, i just cant commit right this moment to that money unfortunately :(

[car.crash]

With this many people wanting them the shop should take a non refundable deposit of £30 per member upfront before ordering if they were to do it to save being lumberd with them like the calendars.

[Ian S]

It would have to be 100% up front like the Orange dials.

[car.crash]

It would have to be 100% up front like the Orange dials.

even better :)

[dangerous dave]

i'll pay up the full price to the club shop whenever its needed:)

[clee]

Ian has posted on the CM boards about this .The club is willing to order 20+ units and get the best price but we must have some commitment from those above :agree:

P&P&Paypal fees UK end will work out at about £15 ( this is a member only deal ) so if we buy 20 you will get them delivered via courier 24/48hrs for £119 :smokin:

I need payment in full to
shop@rtoc.org
Please supply desciption of order , full name ,delivery address ,safe to leave details ( if not in ) and phone contact number .

Good stuff Unstable :agree:
If you could please let Ian or I know the details then we can arrange payment etc as soon as we get sufficient numbers on the books ;)

[Smokey]

So are we good to start paying the cash in.

[UnstableCable]

So are people happy to start making payments for these then? Is the shop happy to take these payments?

The dealer has these in stock so can be dispatched as asap!

[clee]

Yes .
Worst case we don't get enough take ups and I'll have to refund the dosh .
If the majority of those on the above list send in payment then RTOC will place an order for 20+ units :)

[UnstableCable]

Sorry.... took so long to right my last reply missed all the above! :ashamed::ashamed:
Will pm you the details shortly.

[Logg]

Payment sent.

[Ian S]

i dont mind taking delivery of them and sort delivery to other members :) It's all sorted now but thanks for your offer to help out. :)

[Ian S]

Thanks to you chaps who have started the payments coming in :agree:

[modfather]

It's all sorted now but thanks for your offer to help out. :)
no probs will help anytime i can :)

[jamie_8]

Payment sent :smokin:

[modfather]

i have just sent my payment :D

[UnstableCable]

Payment sent :D

[Danboi2]

Payment Sent :D

[Tony Walker]

Payment sent :D

[Steven Leece]

New poster! (less than 10 posts)

Payment sent :D

[Thundercat]

Payment sent for two off tubular manifolds, thanks for organising the group buy.
1. Unstablecable
2. Logg
3. Djinuk
4. jrp
5. modfather
6. jamie_8
7. 5279 (2 manifolds pls)
8. Dangerous dave... :)
9. kial
10. Lee1707
11 Tony=possibly what sort of discount with this many buyers??
12. Danboi2
13. Penfold, lucky 13 :-
14 Mat = possibly what sort of discount with this many buyers??
15. Bigdanc
16. Steve Leece - (IOM member, as with Kial will have to pay bit extra postage)

[lee1707]

Payment sent

[Tony Walker]

Cant believe how quickly this progressed.
1. Unstablecable
2. Logg
3. Djinuk
4. jrp
5. modfather
6. jamie_8
7. 5279 (2 manifolds pls)
8. Dangerous dave... :)
9. kial
10. Lee1707
11 Tony = PAID
12. Danboi2
13. Penfold, lucky 13 :-
14 Mat = possibly what sort of discount with this many buyers??
15. Bigdanc
16. Steve Leece - (IOM member, as with Kial will have to pay bit extra postage

[kial]

New poster! (less than 10 posts)

how should i go about this, how much extra shall i put in?

[elcie]

1. Unstablecable
2. Logg
3. Djinuk
4. jrp
5. modfather
6. jamie_8
7. 5279 (2 manifolds pls)
8. Dangerous dave...
9. kial
10. Lee1707
11 Tony = PAID
12. Danboi2
13. Penfold, lucky 13 :-
14 Mat = possibly what sort of discount with this many buyers??
15. Bigdanc
16. Steve Leece - (IOM member, as with Kial will have to pay bit extra postage
17.elcie.

[clee]

:)

Woken up to payment for 11 already . Just a few more and we'll put the order in .Well done all :smokin:

[Smokey]

Hi Clee did you get my pm.

Mat

[clee]

Just checked PM'S and we now have firm orders for 13 so this will be happening .I'll liaise with Unstable and we'll see if we can get these here for next week :)

[Smokey]

Hi Clee did you get my pm.

Mat

Can you just confirm that you have the correct address to send the manifold to
12 yew tree road smethwick has i payed from my partners paypal account an i think it sent before i had time to put the delivery address.

Thanks Mat

[clee]

Yes Mat .

Worry not ,all good this end :agree:

[Smokey]

Thanks was in abit of a panick, when i was typing out my address the computer went crazy an then just poped up saying payment sent :confused: glad its all sorted.

Thanks Mat

[BigDanC]

Payment sent

[modfather]

Just checked PM'S and we now have firm orders for 13 so this will be happening .I'll liaise with Unstable and we'll see if we can get these here for next week :)


next week :eek: brilliant. think its my best buy this year

[elcie]

Stupid question, how do i pay into the club shop and how much ?

[Bigfoot]

Stupid question, how do i pay into the club shop and how much ?

Use paypal and pay £119 to email address shop@rtoc.org (shop@rtoc.org)

[dangerous dave]

when i said i'd pay up whenever needed i didn't think it would have been within 12hours:smokin: i'll put some wonger in the bank and fire it over before the weeks out, its a done deal tho, im in:agree:

[clee]

Be quick or be dead :coffee:

Got a price for UK highlands and Islands .£12 extra using my usual courier .
It's going to be quite a mission to take all these to the post office hence I'm getting them collected but I can for the odd one or two if Royal Mail works out cheaper for those guys overseas :agree:

[kial]

New poster! (less than 10 posts)

payment sent.... thanks for finding out extra cost!;)

[clee]

:)

[elcie]

payment sent. :)

[UnstableCable]

Just a quick update, waiting for the dealers payment details! Then I can pass them on to the clee and its all go :D.

[car.crash]

Let's hope the seller is genuine as this is a big order for a small club

[Mattw]

Well up for one, I'll pay up Friday if that's ok.
Cheers mattw

[UnstableCable]

Let's hope the seller is genuine as this is a big order for a small club

It is a big order but there from a fairly big seller so not to worried. Has a large website and sells world wide! Has a ebay rating of 4500+ and 99.6% positive :agree:

[clee]

We are waiting on final price and delivery schedule .
What I would like to do is get a sample first to check fit and quality :agree: They look all nice and shiny and the seller is well established but we all know what that can sometimes mean ;) Last thing Matthew and the club wants is for people to be unhappy with the product when it arrives .
This will obviously delay things by a week or so .

[Trevhib]

:goodJob:

Well done you lot. RTOC is alive and kicking. Great to see some effort and support by the club and some £ commitment by the members. I hope the end result is as hoped for. :agree:

[Ian S]

This looks like the Manufacturer website?

Note the price each; €252.00 = £215.

They are in Belgium.

Note also in some small print that it's states they have a 10 year warranty.

http://www.raceland.com/products/ro-hren5-gt-t_42/uitlaat-collector-inox-renault-5-gt-turbo

[Thundercat]

If it helps i have an engine sat in my garage, so can fit a manifold straight on and check fitment. I can quite easy bolt up a spare turbo and enlarged downpipe to check clearances too.

[Smokey]

If it helps i have an engine sat in my garage, so can fit a manifold straight on and check fitment. I can quite easy bolt up a spare turbo and enlarged downpipe to check clearances too.

:agree:

[clee]

If it helps i have an engine sat in my garage, so can fit a manifold straight on and check fitment. I can quite easy bolt up a spare turbo and enlarged downpipe to check clearances too.


Good man Jonathan
I will take you up on that please as Matt is off on holidays soon and won't be able to check it out until he's back .
I'm waiting on a response from the supplier , I'll be in touch to arrange soon :)

[Thundercat]

I can try fitment with either standard T2/2.5inch down pipe or GT28/BMC downpipe. I can take pics of both and post on here.

[ranj]

My name wasnt on the list but if i want one can i just go ahead and pay the club shop ????

[clee]

Yes ,no problem .

We are still awaiting a response from the supplier about a few things .Matthew has been chasing them regards a sample order etc .
If we have not heard by Monday then I'll chase them up as RTOC Shop :agree:

[TNT!hammond]

1. Unstablecable
2. Logg
3. Djinuk
4. jrp
5. modfather
6. jamie_8
7. 5279 (2 manifolds pls)
8. Dangerous dave...
9. kial
10. Lee1707
11 Tony = PAID
12. Danboi2
13. Penfold, lucky 13 :-
14 Mat = possibly what sort of discount with this many buyers??
15. Bigdanc
16. Steve Leece - (IOM member, as with Kial will have to pay bit extra postage
17.elcie.
18. TNThammond - PAID

[tiff_lee]

1. Unstablecable
2. Logg
3. Djinuk
4. jrp
5. modfather
6. jamie_8
7. 5279 (2 manifolds pls)
8. Dangerous dave...
9. kial
10. Lee1707
11 Tony = PAID
12. Danboi2
13. Penfold, lucky 13 :-
14 Mat = possibly what sort of discount with this many buyers??
15. Bigdanc
16. Steve Leece - (IOM member, as with Kial will have to pay bit extra postage
17.elcie.
18. TNThammond - PAID
19.tiff_lee

[tiff_lee]

Payment sent

[clee]

Sample paid for so I'm hopeful I'll receive it next week :)

[Smokey]

Out of interest how many people have payed up amend the list below to show if you have or not.

Thanks Mat



1. Unstablecable
2. Logg
3. Djinuk
4. jrp
5. modfather
6. jamie_8
7. 5279 (2 manifolds pls)
8. Dangerous dave...
9. kial
10. Lee1707
11 Tony = PAID
12. Danboi2
13. Penfold, lucky 13 :-
14 Mat = PAID
15. Bigdanc
16. Steve Leece - (IOM member, as with Kial will have to pay bit extra postage
17.elcie.
18. TNThammond - PAID

[clee]

16 paid for so far :)

[JRP]

16 paid for so far :)

Iam going to cough up in the next few days as discussed in pm. :) top work people:agree:

[modfather]

Out of interest how many people have payed up amend the list below to show if you have or not.

Thanks Mat

Originally Posted by TNT!hammond
1. Unstablecable
2. Logg
3. Djinuk
4. jrp
5. modfather PAID
6. jamie_8
7. 5279 (2 manifolds pls)
8. Dangerous dave...
9. kial
10. Lee1707
11 Tony = PAID
12. Danboi2
13. Penfold, lucky 13 :-
14 Mat = PAID
15. Bigdanc
16. Steve Leece - (IOM member, as with Kial will have to pay bit extra postage
17.elcie.
18. TNThammond - PAID

[royz]

not to late for this am i:cry:

[tiff_lee]

I only see this group buy and paid 2 days ago, I think the order was for 20+ and I was number 19 on the list so....

[Ian S]

not to late for this am i:cry:
No, not too late. :) If there are more than 20 on the list who've paid that's fine. It's not limited.

[clee]

It will now be a couple of weeks before I put the big order in and we can get more if demand is there .
Sample should be with me next week ,I'll have a gander then ship it over to 5279 to check fitment .

[Dave Reed]

Just sent payment :)

[elcie]

1. Unstablecable
2. Logg
3. Djinuk
4. jrp
5. modfather PAID
6. jamie_8
7. 5279 (2 manifolds pls)
8. Dangerous dave...
9. kial
10. Lee1707
11 Tony = PAID
12. Danboi2
13. Penfold, lucky 13 :-
14 Mat = PAID
15. Bigdanc
16. Steve Leece - (IOM member, as with Kial will have to pay bit extra postage
17.elcie. PAID
18. TNThammond - PAID

[BigDanC]

1. Unstablecable
2. Logg
3. Djinuk
4. jrp
5. modfather PAID
6. jamie_8
7. 5279 (2 manifolds pls)
8. Dangerous dave...
9. kial
10. Lee1707
11 Tony = PAID
12. Danboi2
13. Penfold, lucky 13 :-
14 Mat = PAID
15. Bigdanc =PAID
16. Steve Leece - (IOM member, as with Kial will have to pay bit extra postage
17.elcie. PAID
18. TNThammond - PAID

[JRP]

Paid

[clee]

;)

Yep, that makes 18 paid in total ,not all from that list so looks like we may be getting a few more to keep in stock :agree:
They will be available in the shop at this price for members so don't worry if funds are tight for some at the moment :)

[dangerous dave]

im still having one but as theres no rush i wont.. going to the bank is something i always avoid..:p

[clee]

...but we do have a preferred buyers list :cooter:

[IANMM]

put me down for one:)

[clee]

I've had an email saying sample has been shipped :)

[Tony Walker]

yay :D

[clee]

Postie was sharpish this morning :)
Raceland stamps .
Flange is not the flattest I've seen but seems OK at the pipe ,just runs off where the shape is thin .... All the welds look good
Anyway I will send out to be test fitted today or tomorrow .
http://i193.photobucket.com/albums/z110/cleetav6/rtoc%20shop/IMG_0644.jpg
http://i193.photobucket.com/albums/z110/cleetav6/rtoc%20shop/IMG_0645.jpg
http://i193.photobucket.com/albums/z110/cleetav6/rtoc%20shop/IMG_0649.jpg
http://i193.photobucket.com/albums/z110/cleetav6/rtoc%20shop/IMG_0647.jpg

[Nayls]

looks very nice! but losing that distinctive burble is not worth the looks imo

[Trevhib]

One of you should think about doing a back to back RR test...

[Mart]

..

[Logg]

looks very nice! but losing that distinctive burble is not worth the looks imo

Might as well cancel your order then.

[kial]

lussssh cant waaaaait haha

[Ian S]

Lee what is the weld penetration like?

Is there much / any seepage going through into the interior, ie, in the gas flow?

Any sharp steps that need to be rounded?

[clee]

...and suddenly all the nay-sayers come out to play :sad2:;)

I'm not bovered .....I've got a proper MANS system on a proper MANS motor that does make a difference :cooter:


http://i193.photobucket.com/albums/z110/cleetav6/Photo-0068.jpg

[Logg]

..

For this price it's worth a punt....... Rather than gaytecs old £500 price tag.

[TrixNFlix]

looks very nice! but losing that distinctive burble is not worth the looks imo

:agree:

And as Mart says, it is funny how everyone changes their tune!:eek:

[Penfold aka The Dealer]

:agree:

And as Mart says, it is funny how everyone changes their tune!:eek:

Worth a punt at this price.... if there proven to be crap.... flog it on....

[tubbyG]

One of you should think about doing a back to back RR test...


Definetley, would be good to see what results come out of it

[Ian S]

..I think you might find that it's just for the difference it makes it's a waste of £350 to £500 but not a waste of £120.

No-one then has changed their tune. It might still be a 4th division mod, for some engine configurations anyway, but now the admission price is 4th division not premier league.

Also, people love a bargain, and at up to 75%, or whatever, off, this does seem to be one.

[Ian S]

And with so many being fitted at once, surely there will be a few before and after measurements?

That's what was so continuously conspicuously absent from KTec and their customers.

It should be borne in mind that there are two different internal bores of the OE 5GTT manifold. I forget just now which is larger but that may partly account for why some people notice a change when others don't, when the rest of their equipment is similar or the same.

And that OE manifold is really poor at flowing from the gearbox end cylinder. I fed an air line into each inlet of a standard manifold and felt the air flow exiting the turbo end. The far one was best. The near one to the turbo just stalled and didn't exit.

[rs250nut]

And that OE manifold is really poor at flowing from the gearbox end cylinder. I fed an air line into each inlet of a standard manifold and felt the air flow exiting the turbo end. The far one was best. The near one to the turbo just stalled and didn't exit.[/QUOTE]

You can re shape it though with not a lot of work, in for back to back dyno results though.

[IANMM]

:)

[Thundercat]

i think any equal length tubular is going to improve flow and thats worth £120.

[Mart]

..

[clee]

Yes ,no ,maybe ,sometimes ,sometimes not .......


http://www.ojzengineering.co.uk/page.php?page=104

[Trevhib]

I'd just like to say, in case anyone misunderstands: I'm not a naysayer. I'm the opposite.

My comment suggesting back to back tests was in the hope that this group buy might end up providing some additional and useful insight/information/knowledge for the wider club on this previously contentious subject.

I think, like Ian says, for £120 this is a good punt. If there is a question over the efficacy of the manifold design, the club could always test this sample before placing the big order...

[Mart]

..

[clee]

Depends who's writing it :p
OJZ ? Id certainly take notice of him :coffee:

[Thundercat]

well already got the ktec mk1 manifold so be interesting to see if fitment is better and if it last longer without cracking.

[D4WNO]

the club could always test this sample before placing the big order...

Which is what is already planned

[clee]

We are testing fit but not function .
Could do this I suppose but that will take months unless someone can pop both a std and this on a RR in the next couple of weeks ??

Can we not just leave this up to those that have paid their hard earned to comment as and when ?
Who knows for certain here and now ? Anybody ? NO !

[Trevhib]

Which is what is already planned

I know it's being trial fitted to a member's car but does this 'test' include back to back rolling road sessions to approximate potential differences in power/torque?

Edit: Just seen Clee's post. So no then. Dawn, you knew what I was talking about and if you knew what the club test involves then I don't know why you posted what you did.

Anyway, I'd better butt out of this as I'm not buying one of these manifolds, I was just showing a bit of interest from a club perspective. It should be noted that my original suggestion was aimed at one of the members doing a test once they'd received their manifold. I wasn't trying to muddy any waters or cause problems with this group buy. The idea the club might do it upfront was merely a subsequent idea in response others' comments regarding whether these things have any tuning value.

Maybe the thread should be locked until things have moved forward to save any further misunderstandings.

[clee]

Try and keep up Trev :D

I just think it's a bit late in the day for all these with a new found interest in this thread to start making comments :sad2:
This I thought was a good positive CLUB effort from all involved and now we get rumblings when the last post is in sight .....................albeit from those with no interest in the subject up until now :coffee:

[Mart]

..

[Trevhib]

Try and keep up Trev :D

I just think it's a bit late in the day for all these with a new found interest in this thread to start making comments :sad2:
This I thought was a good positive CLUB effort from all involved and now we get rumblings when the last post is in sight .....................albeit from those with no interest in the subject up until now :coffee:

:) My post above has been edited.

[clee]

..


That's a silly argument that implies that anyone that sells anything is full of it ......
I've used them so have first hand experience ,the only reason I posted the link .

OE MART ;)
Some companies do know what they are doing and can improve over std :agree:

[Mart]

Ok, we cool. I wasn't trying to rock the boat; just putting the 'other side' perspective to it.

Anyway, I've deleted all my previous comments in this thread, and yep, it is a good thing the club is doing for its members :cool:

Good darts :agree:

[D4WNO]

Trev, actually I thought you just hadn't read all of the thread so less of the entirely unecessary beef please, I was actually quickly just updating the thread on my phone and was attempting to help. It genuinely was nothing else but that. :agree:

Some really valid points have been made and I too would be interested to see if one of the buyers is able to get to an RR road at any point in the near future. May end up being a good selling point if all turns out well :)

[car.crash]

clee will you be letting members know when the order will be going in? i may well have one if i can stump the cash in time. thanks

[clee]

If all good when Jonathan has test fitted then I aim to place the order early next week .That order will be for 25+ so we will have some in Shop stock at the same price .

[JRP]

If all good when Jonathan has test fitted then I aim to place the order early next week .That order will be for 25+ so we will have some in Shop stock at the same price .

Lets hope that itall goes well with the test fit. thanks to clee and all involed for getting this sorted.:agree:

[Nayls]

I hope i did'nt kick off all this today? nothing major i know,but still?

i think it looks really nice but i love the noise of the standard fanimold so would'nt get one for that reason.

i hope you all like the sound of it though.

[Nayls]

Might as well cancel your order then.


would do if i actually ordered one in the 1st place! ;)

[clee]

Talk ,talk ,it's only talk :)

Fair points raised from all , we don't have to agree about everything to be on the same side ;)

[scott 5gtt]

I Have been using the raceland equal length header for a year now with no problems at all good quality piece of kit :agree: yes the exhaust note does change but its different mine sounds a bit like a rs turbo (quite like it) suppose every ones will be different depending on the rest of there exhaust system

9024

9025

9023

:p

[BluntyR5GTT]

I Have been using the raceland equal length header for a year now with no problems at all good quality piece of kit :agree: yes the exhaust note does change but its different mine sounds a bit like a rs turbo (quite like it) suppose every ones will be different depending on the rest of there exhaust system

9024

9025

9023

:p

Question is apart from sound did you notice any difference in performance,spool up.etc.

[HAndy]

defo help with spooling , noticed a 300 rpm improvement when fitted over oe item:)[/QUOTE]

this was the k tec item though,

[Trevhib]

"Trev, actually I thought you just hadn't read all of the thread" - Ok no worries, I see the angle you came at it from but I don't know why you would have assumed that I hadn't read the whole thread, especially given my prior post on page 2.

"so less of the entirely unnecessary beef please" - Hmmm, in that case it feels right to say less of the entirely unnecessary needle Dawn. Which was the chicken and which was the egg in that situation?

Bottom line is, despite not being in this group buy it seems we are both interested in its outcome and it would seem we're hoping that someone is motivated enough to do before and after RR sessions to answer one of the age old C1J questions :agree:

Any takers?

[scott 5gtt]

Question is apart from sound did you notice any difference in performance,spool up.etc.


lol yeah mate cos i fitted a t28 and a 285 and did a full rebuild at the same time :laugh: otherwise i dont know because it was standard with standard manifold before.. i recon it does help with spool up like:agree:

[Thundercat]

Hi all, received the sample raceland manifold today thanks to clee, will be bolting it up to an engine tomorrow evening and i'll take some pics of it fitted. I'll also get a straight ruler on it before fitment to check for warp on flanges. But to be honest all looks good, it's definetly lighter than the mk1 ktec maifoldand also retains the threaded top holes in turbo flange as per standard manifold.:)

[BluntyR5GTT]

is someone actually going to do a back to best test with these against standard then ?

[djinuk]

theres the rolling road day coming up in march.. maybe somebody could do it on that day, get the first run in the morning, then get it swapped and go again in the afternoon

[BluntyR5GTT]

sounds like a good idea but is anyone whos bought one actually coming the day? iv not bothered as everyone on hear always says its a pointless waste of money and the satndard one is more than adequate

[Dave Reed]

i used to run the ktech mk1 one and i can say that on my car it made my terminal speed at the pod drop by 2mph when i refitted the standard item.. But then thats my engine.. Also noticed spool up was slower to.

I've ordered one as the way i see it, it cant make it any worse and its only 120 quid, got to be better than wasting money on a bass box or chrome crap :)

[JRP]

i used to run the ktech mk1 one and i can say that on my car it made my terminal speed at the pod drop by 2mph when i refitted the standard item.. But then thats my engine.. Also noticed spool up was slower to.

I've ordered one as the way i see it, it cant make it any worse and its only 120 quid, got to be better than wasting money on a bass box or chrome crap :)

Or a stainless steal sterio:laugh::laugh:

[Tony Walker]

ive ordered one and will be attending, doubt ill get chance to do back to back tho :S

[Alex]

If you fancy doing it T I reckon we could easily swap them over......... ;)

[Trevhib]

Guys, the discussion over the value of tubular manifolds vs standards items is done with. It's not as if any of you have had experience of this particular manifold anyway. Most of the lads have paid up so less of the 'I heard this is a waste of time'.

As for the RR day before and after - come on guys, someone step up ;)

[BluntyR5GTT]

yeah someone step up for it

[MADFIVE]

Guys, the discussion over the value of tubular manifolds vs standards items is done with. It's not as if any of you have had experience of this particular manifold anyway. Most of the lads have paid up so less of the 'I heard this is a waste of time'.

As for the RR day before and after - come on guys, someone step up ;)
thing is mate all the lads that called them a waste of money have now gone and got one. :confused:

[JRP]

thing is mate all the lads that called them a waste of money have now gone and got one. :confused:

Who is all the lads?

Any way doeas it really matter? the fact they are so cheap is why the people that have previously said no to them have changed there minds..

At the price they are if they turn out to be detrimental people have only lost a cheeky 120... not the 4 to 5 hundred ktec and the likes wanted....

for them to be tested it will have to be on every different stage of engine to guage if its good or not as every engine is different.

[TrixNFlix]

thing is mate all the lads that called them a waste of money have now gone and got one. :confused:

:agree:

[BluntyR5GTT]

but surely if these are as most people on here put it a waste of time as the standard one is better then regardless of cost be it 100 or 500 notes its throwing your money away.

i did notice one of these raceland manifolds for sale on ebay it was upto around £190 last time i looked so someone is making a bit of profit lol

[JRP]

what i really am saying is so what if sombody decided they want one now and didnt then... ive never really been botherd about them as i had a manifold (standard item) that did the job why spend money on a pretty one that has no proven gain....

saw this deal and thought pahh i'll try it out ...

Does it really matter who said what in the past? i just think its a good show of club support getting this sorted..

as i say to test it, it really should be tested on every varient of set up to find what it works best and worst on....

[MADFIVE]

thing is mate all the lads that called them a waste of money have now gone and got one. :confused:
if they know that there not good. then why buy one even if its 120 notes. 120 is alot of money at the min. with people losing there jobs. imo i would keep it in my bank.

[TNT Tricky Nicky]

If i was at the stage of doing my engine i would probably get one for the price, as it stands i'm still sorting out the body work.

I think alot of people look at it from a bhp/£, so to spend £400+ for 1-5bhp? gain at best is 1 bhp/£100

spend £120 for 1-5 bhp? gain at best is 1bhp/£17ish

that's why alot of people have the opinion that they're a waste of money and time but now it makes more sense as the real power gains have been done, ie bigger turbo, better fueling, less restrictive exhaust as that's where you'd spend the money if you had £500 to spend on performance mods

[tiff_lee]

When did RTOC become so political? I mean really who cares that much if so and so said tubular manifolds suck then goes out buy one at a bargain price.

I'm pretty sure everyone has spent 100 odd notes on worse things, all in all worst case scenario you end up with a big shiny doorstop :cartman:

I'd just like to say thanks to the people who set the deal up I could always do with more parts to store in my bedroom/warehouse! :p

[TrixNFlix]

Yep this is great work by the Rtoc members and comitee. :agree:
Hope for lots more group buys in the future. :)

[MADFIVE]

fare do. its just that from what ive expearanced in the last 5months. is that when ever people want to do stuff on there cars a surtain few tell you that its not good for your car also ive had bad comments about my car. ie people hoping the head gasket goes. and that who ever sets my car up is sh*t and has the exp of a 2year old. ive always been told that there is a surtain few that are balls deep in each other. and dont like people doing better than them on there cars. i didnt belive it but im starting to belive it now.:(

[BluntyR5GTT]

Totally agree that the club has done well getting this deal and hope more things like this can be done more often

[Trevhib]

if they know that there not good. then why buy one even if its 120 notes. 120 is alot of money at the min. with people losing there jobs. imo i would keep it in my bank.

That's not what your strategy was when deciding to buy/fit a cone filter, chromed rocker cover and ally header tank. All of which either provide no added value or are actually detrimental. :disagree:

I'd like to know from those who're nay-saying on here, exactly what their point is. Are you trying to be altruistic and your intention is to dissuade these guys from what you believe is them wasting their money? As far as I can see that's the only half-decent reason. If that is the case, then most here are going about it in a very insensitive and cack-handed fashion. Rubbish :dearme:

[JRP]

fare do. its just that from what ive expearanced in the last 5months. is that when ever people want to do stuff on there cars a surtain few tell you that its not good for your car also ive had bad comments about my car. ie people hoping the head gasket goes. and that who ever sets my car up is sh*t and has the exp of a 2year old. ive always been told that there is a surtain few that are balls deep in each other. and dont like people doing better than them on there cars. i didnt belive it but im starting to belive it now.:(

Haha whos ball deep in who:laugh:

[MADFIVE]

That's not what your strategy was when deciding to buy/fit a cone filter, chromed rocker cover and ally header tank. All of which either provide no added value or are actually detrimental. :disagree:

I'd like to know from those who're nay-saying on here, exactly what their point is. Are you trying to be altruistic and your intention is to dissuade these guys from what you believe is them wasting their money? As far as I can see that's the only half-decent reason. If that is the case, then most here are going about it in a very insensitive and cack-handed fashion. Rubbish :dearme:
thats the way im feeling at this moment in time. ill say whats on my mine and if you and anybody else dont like what im saying then tough.

[Trevhib]

thats the way im feeling at this moment in time. ill say whats on my mine and if you and anybody else dont like what im saying then tough.

You've been upset by some people (as I notice you've said in another post), and you're using that as an excuse to make other people feel the same way. Well, I guess being old enough to drive doesn't equate to being grown up.

I'm done with this conversation.

[MADFIVE]

You've been upset by some people (as I notice you've said in another post), and you're using that as an excuse to make other people feel the same way. Well, I guess being old enough to drive doesn't equate to being grown up.

I'm done with this conversation.
thats fine by me mate.

[BluntyR5GTT]

Maybe its best get this thread back onto topic. I was in no way putting this deal down i thinks its good the club is doing group buys and i would love these to make an improvement over standard. I dont think grant is putting the deal down either everyone is entitled to an opinion.

[IANMM]

I just think they look pretty thats why im buying one :upyours:

[Thundercat]

Right been tinkering in the garage with the new manifold. Firstly checked the faces of the turbo flange and manifold flange with a straight edge. Turbo flange flat around the center bore but with run off where the mounting holes are probably due to over deburring with grinder. Manifold flange flat across the bores again, very slight step (less then 1mm) when measuring out from inner bores to the outer ones but should pull up when bolted to the head.
As for fitment no problems, no filing or metal removed at all, just a good wiggle of inlet when both pushed on to head studs. Both inlet and exhaust manifold flat on the head without any nuts to pull it up. All so a bonus the inlet mounting flange and exhaust mounting flange are the same thickness unlike the KTEC one that i have.
Right just for tonight tried a standard T2 turbo on the manifold with a 2.5 inch crossover pipe and no issues to report. Compared the turbo mounting angle to a standard manifold on another head and really can't make out any differences. Even crossover pipe seems to be in the correct position in relation to inlet manifold.
Will try a bigger turbo and different crossover pipe monday night and post more pics.

[Thundercat]

More pics

[James5]

Looking good, does it interfer with the stater motor like the mk1 k-tec job used to if you were running OE starter and not the thinner so called uprated version

[Thundercat]

There shouldn't be an issue will throw on a large starter motor tomorror and check fitment

[kial]

looking good, thanks for the feeeeeedback ! :)

[EDM]

Definately worth the £119, payment sent.:mart::cooter:

[BluntyR5GTT]

i must say it does look like a quality bit of kit :agree:

[Ian S]

There shouldn't be an issue will throw on a large starter motor tomorror and check fitmentAnd the starter heat shield?

[Thundercat]

Well may have a starter heat shield in the loft but you have to remind me what it looks like. Haven't had one on any of me cars for a while and lots of bits in the loft.

[Ian S]

Shiny if new, squarish and curved down the middle to fit around the shape of the round starter. Maybe 12 inches by maybe 10". IIFC, two bolt holes.

[Nayls]

starter heat shield in here so you know what you're looking for :)

http://cgi.ebay.co.uk/RENAULT-5-starter-motor-heat-shield-gt-turbo-/320657152426?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4aa8a7d9aa

[Ian S]

I don't what that is, but it's not a 5GTT starter heat shield.

Turbine cover maybe?

[Nayls]

I don't what that is, but it's not a 5GTT starter heat shield.

Turbine cover maybe?


oh! sorry :cartman:

[R5TURBORON]

I want one if these when do you need payment don't get paid intill the end of the month lol cheers

[Ian S]

oh! sorry :cartman:Well spotted though :) I also looked for a photo.
when do you need payment don't get paid intill the end of the monthsThat's 10 days that you're paid? We'll be buying a few extra.

We could have another list of those want one in a week or two, maybe we'll take a deposit from those people so we don't find ourselves left with too many in stock.

[R5TURBORON]

Sounds good I defo want one 100%

[djinuk]

i now have the cash for this , where do i send payment.. and is there still time.

[modfather]

P&P&Paypal fees UK end will work out at about £15 ( this is a member only deal ) so if we buy 20 you will get them delivered via courier 24/48hrs for £119 :smokin:

payment in full to:
shop@rtoc.org (shop@rtoc.org)
Please supply desciption of order, full name, delivery address, safe to leave details ( if not in ) and phone contact number.

:)

[Ian S]

Yes there is still time as we haven't placed the order yet. :)

[Ian S]

General question: Do you think there are any members who would like one of these and have not heard about this group buy?

[R5TURBORON]

Might be djinuk told me about them today :-)

[Penfold aka The Dealer]

General question: Do you think there are any members who would like one of these and have not heard about this group buy?

:agree: not everyone uses the boards often.... maybe ordering a few more to sit in the shop would not be a bad idea...

[car.crash]

Can we not email everyone like we do for nat day?

[IANMM]

:agree: not everyone uses the boards often.... maybe ordering a few more to sit in the shop would not be a bad idea...


or the club opens a ebay shop to sell them?

[clee]

We already have an Ebay account ,sold a few of the dial kits through that .Works more as a club advert at the moment but we could start using it more .Time .......space ..just thought how much room 20 of these will take up ,I'm out of space so they'll have to sit in the lounge :scared:
20 sold outright and 2 or 3 promises so I think we may order 30 .


;)

Yep, that makes 18 paid in total ,not all from that list so looks like we may be getting a few more to keep in stock :agree:
They will be available in the shop at this price for members so don't worry if funds are tight for some at the moment :)

[IANMM]

We already have an Ebay account ,sold a few of the dial kits through that .Works more as a club advert at the moment but we could start using it more .Time .......space ..just thought how much room 20 of these will take up ,I'm out of space so they'll have to sit in the lounge :scared:
20 sold outright and 2 or 3 promises so I think we may order 30 .



have they given a delivery time for 20+ ?

[clee]

In stock as far as I'm aware ,will check when I order .
Will be on a pallet I assume ,120 kgs if we get 30 .

[clee]

Update is that they are getting a delivery this Friday .I'll order as soon as I get confirmation they can supply in full .

[dangerous dave]

sounds like its time to pay up then.. :)

done............nice work guys:agree:

[clee]

:)

They've also confirmed 10 year warranty :coffee:

[BluntyR5GTT]

thats a really good deal lee well done to the rtoc for this deal :agree:

[jesus in the seat of a 5]

Update is that they are getting a delivery this Friday .I'll order as soon as I get confirmation they can supply in full .

hello clee, for those whomb dont have pay pay and our still using stone tablets , is there another way i can get my prehistoric mitts on one of these fine chaps..:)

[D4WNO]

Lol, life would be easier to just register with PayPal. However, as you're Jesus, I'll ask Lee to send you details of where to send a cheque etc :)

[jesus in the seat of a 5]

Lol, life would be easier to just register with PayPal. However, as you're Jesus, I'll ask Lee to send you details of where to send a cheque etc :)

:laugh:..ta , payable to dawn....:wasntme:, ta hun, get on it clee my lovely...:)

[clee]

First born man child ,postal order or Gregory payable to RTOC Shop .


17 Smeeton Street
Heanor
Derbyshire
DE75 7HP

[jesus in the seat of a 5]

First born man child ,postal order or Gregory payable to RTOC Shop .


17 Smeeton Street
Heanor
Derbyshire
DE75 7HP

:laugh:..ill chuck in some feed for your chucks too.....:D

[Thundercat]

Just an update on the manifold fitment, as requested i have found a phase 1 large starter motor and can confirm that it fits straight on the back of the engine with approx half an inch clearance to nearest exhaust pipe.
I'm still unsure to what the starter heat shield looks like as the pile of brackets/guards of me old phase 1's are numerous. If anyone has a pic of one then i have an idea.

Clee, what do we need to do for the 10 year warranty, is the sticker on the manifold the proof of purchase?

[Nayls]

http://i182.photobucket.com/albums/x257/Naylsgt/heatshield.jpg

[clee]

We'll have to go through the distributor and return defective items .
This is from Raceland website .

Manifold Sst Renault 5 GT Turbo

Product description

The Raceland stainless steel headers have laser cut flanges, high quality stainless steel and with mandrel bends. All Raceland stainless steel headers have a 10 year warranty and are compatible with LPG. The Raceland stainless steel headers will provide at least a 10% power increase throughout the entire rev range. The Raceland stainless steel headers can be further enhanced by installing the affordable Raceland stainless steel sports exhaust system designed to give the sound you want, while improving the maximum engine performance.


Warranty

1. The invoice included in your shipments serves as your proof of warranty and must be included in your return shipment to Raceland along with the purchased item.
2. We offer a warranty for all defects and all malfunctions, but this is limited exclusively to the repair or exchange of an item or for monetary reimbursements, and only if we were informed of the defect or malfunction within 7 days after receipt of the item.
3. Besides damage to items during shipping, the warranty does not cover any risks that may occur outside of our sphere of influence. Additionally, the warranty will not cover any consequential damage due to incorrect usage or modification of the item.
4. The above-mentioned regulations may not, under any circumstances, constitute a limitation or disclaimer for the warranty of defects.
5. There is a warranty period of at least 2 years on every item.
6. The warranty is in effect from the date of invoice.
7. Installation:
a. The seller does not provide installation services.
b. The client must check and confirm the following:
i. The functional efficiency of the item
ii. The included instruction manual.
The installation of the item is the sole responsibility of the client. Should there be an obvious defect, the client may return the item according to the above-mentioned regulations.
Satisfied or money back

8. If you are not completely satisfied, you have the right to return an item to us within 7 days following the date of receipt. The item must be returned unused and in its original packaging. You must include the invoice of your order with the return. We prefer you to use the same courier company with which your order was shipped to you. In this case, the return costs are your responsibility. Returns must be shipped to the address indicated on the invoice. We will not accept shipments returned to us without postage paid or shipped as COD.
9. We charge a 15% administration fee (min. of 12.40 EUR) for all outstanding invoices, regardless of the payment method.
10. All disputes regarding this contract are subject to the Court of Oudenaarde (Audenarde).

[modfather]

[quote=clee;203426]We'll have to go through the distributor and return defective items .
This is from Raceland website .

Manifold Sst Renault 5 GT Turbo

Product description

The Raceland stainless steel headers have laser cut flanges, high quality stainless steel and with mandrel bends. All Raceland stainless steel headers have a 10 year warranty and are compatible with LPG. The Raceland stainless steel headers will provide at least a 10% power increase throughout the entire rev range. The Raceland stainless steel headers can be further enhanced by installing the affordable Raceland stainless steel sports exhaust system designed to give the sound you want, while improving the maximum engine performance.


i wonder what sort of price the exhaust system would be :scratch:

[DaveMayGTT]

i wonder what sort of price the exhaust system would be :scratch:

If there 2.5" rear exit im interested but whats the chances? :cartman:

[elmof1]

is the shop going to stock a few of these? money is tight this month but def be interested next month in buying one :)

[clee]

Yes ,we will have some in stock :agree:

[R5TURBORON]

Will be purchasing mine Monday :-)

[clee]

Just had an email from the supplier saying he now has enough stock to cover our order :) Should be sorted tomorrow and they'll be on the way .

[R5TURBORON]

Money sent for mine :D

[jamie_clioGTT]

Is there any of these left?

[R5TURBORON]

think there is as they ordered extra

[R5TURBORON]

What's the ETA on these. I paid monday but not had any messages saying u have received payment cheers

[Lexgtturbo]

I need one of these, but I need it in Norway, so I guess there will be a higher postage fee. Is it possible to have one sent to me?

[clee]

Yes , we can send to Norway .I will check on extra postage costs and let you know .
You should have had a Paypal confirmation Aaron ? I've got it anyway :agree:
ETA ...Not sure as they have yet to send me a Paypal invoice ,I've chased them up 3 times now . I expect it to be about a week delivery from then + it'll take me a couple of days to process them and post so about 2 weeks .

[R5TURBORON]

Yeah just checked I've got a paypal email :-) looking forward to more shiney parts cheers

[djinuk]

sent payment for mine today ;)

[Lexgtturbo]

Goodie, will pay as soon as you get the total with postage fee, or I can pay for the item now and pay for postage when you know what its going to cost :)

[clee]

Just checked on shipping to Norway :eek: Not cheap but still works out a lot less than you would pay for the item alone anywhere else ;)
6 kilos 70x30x30cm £40 so you total would be £151 .

http://www.interparcel.com/quote/courier-quote2.php

[demiturbo]

New poster! (less than 10 posts)

is there any left ? and whats the full payment with postage ?:)

[clee]

25 paid for :smokin:

We are ordering 30 ,at least I will when the supplier gets back to me :crap:

Price delivered UK mainland is £119 .
Paypal to

shop@rtoc.org

Or cheque/PO

RTOC Shop
17 Smeeton Street
Heanor
Derbyshire
DE75 7HP

Need address ,safe to leave option for courier and a phone number please :agree:

[demiturbo]

New poster! (less than 10 posts)

hello i am trying to bye the tubular manifolds through my paypal im not sure how to do it could you let me know what i have to do to send the payment thankyou

[clee]

Log in ,click on SEND MONEY ,type in email address as listed above then amount to pay .Continue, then add a note with all information requested :agree:

[LeeJames]

New poster! (less than 10 posts)

Paid! :)

[demiturbo]

New poster! (less than 10 posts)

money sent;)

[raider_gtt]

i havent been told anything bad about these manifolds and i have sold a fair few ;)

[Ian S]

At this rate 30 might not be enough?

[clee]

It's enough for now ...I'm not lugging any more in when they drop the pallet on the street :D

[Ian S]

So that's now 27 paid and one to Norway? :)

[clee]

27 sold :agree: ................if they would only accept our money :coffee: