2.5 inch downpipe onto a scorpion system?

[doggydowg22]

Hello all

Will a 2.5" ktek downpipe mate up with the standard size turbo elbow and the standard size scorpion system im assuming it will be 2 and a quarter inch?

Looking at a buying a 2.5" downpipe as it has a much needed lambda thread welded into it.Thanks

[Woznaldo]

It will definitely hook up to the std elbow and probably hook up to a std system but, a quick call to K-Tec would let you know for sure.;)

[BluntyR5GTT]

yes they go on no probs iv got the exact set up on mine, i also had the turbo elbow machined out

[fishead]

my experiance of that set up, is it blows more that a ****ty hooker thats jus gettin paid 10x her usual rate

[KeefaGT]

Have just tried to fit my Big Jim (2.5") downpipe to scorpion (2 1/4") system today and have just given up :cry: It seems impossible to get a seal so you might be dissapointed m8.
Has anyone solved this problem before without fitting a sidey?

[dangerous dave]

Have just tried to fit my Big Jim (2.5") downpipe to scorpion (2 1/4") system today and have just given up :cry: It seems impossible to get a seal so you might be dissapointed m8.
Has anyone solved this problem before without fitting a sidey?

yep, had a guy chop off the flange on the zorst and slide over a slightly larger one.. :)

[Adam 005]

my scorp would not line up flange was to small for larger cross over pipe:(

[KeefaGT]

New flange it is then :D