servo pipe

[danielmk323]

hi guys i have a problem wher do i need to hook up the pipe that gos to the servo i now that should go to inlet but their are two brass out lets should it go ther or i am ronge

[car.crash]

The top of the manifold has 2 one way valves. Use one of them. The other 2 pipes on the manifold are for water at either end.

[danielmk323]

o great tank you then what pipes do they go in the inlet my set-up i runig whit out them do i need them the water ones

[Adam 005]

the outlet you need is the one below the carb on the left as you look down on the carb.it looks like a pipe with a nut on it

[danielmk323]

yes tank you for the help now my inlet dont have the water pipes runig true it is that bed or it dosent mater?

[James5]

yes tank you for the help now my inlet dont have the water pipes runig true it is that bed or it dosent mater?

You can run inlet manifold without coolant if you want, I haven't run it on my own 5 for years now:agree:

[danielmk323]

You can run inlet manifold without coolant if you want, I haven't run it on my own 5 for years now:agree:

tank you man