Second water temp sensor??

[REGGY5GT]

Right, i have the standard temp gauge in the dash and a aftermarket gauge in the centre vent, i stupidly thought id T into the standard temp gauge wire for the aftermarket gauge but all this did was kill the supply to the standard gauge, so the other option i have is to fit another seperate temp sensor in the block or head but the problem is where?? do any of the b18ft gurus know of any blanking bolts i can use to put the sensor in?? thanks in advance

[5teve L]

You can get a kit that you fit in the top rad pipe AFAIK.

[James5]

You can get a kit that you fit in the top rad pipe AFAIK.

:agree: As Steve says find out the id of the top rad hose pipe, and the thread of the sensor and then just buy to match.

[TrixNFlix]

:agree: As Steve says find out the id of the top rad hose pipe, and the thread of the sensor and then just buy to match.

32mm :agree:

[SCHWARTZ]

something like this. May be cheaper elsewhere tho.;)
http://www.demon-tweeks.co.uk/Performance/Gauges_&_Dial_Kits/Fittings_&_Accessories/LMA_Hose_Adaptor_Kit/812/1843

[REGGY5GT]

how :rob: of me,lol, totally forgot these existed, thanks guys:agree::agree:

[REGGY5GT]

bought these just, they should do the job, bought a 34mm one so i dont restrict flow too much, 32mm will stretch on i rate, sensor is same make as my gauges so calibiration shouldnt be a problem,

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=270669529520&ssPageName=STRK:MEWNX:IT

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=360328978970&ssPageName=STRK:MEWNX:IT

thanks again for the heads up chaps:smokin:

[sieger]

i also got 1 fitted, black thingy fitted in the hose, don't forget to run a groundwire from the adaptor :ashamed:



http://img40.imageshack.us/img40/9762/img1643n.jpg