View Full Version : Crank Case Ventilation hose
New poster! (less than 10 posts)
Guys
What part number is the small rubber piece of tube in the right of middle in the pic? Any idea of ID so I can replace it?
Plus does the dash pressure gauge supposed to read at max when driving about?
Cheers
Paul
New poster! (less than 10 posts)
Guys
What part number is the small rubber piece of tube in the right of middle in the pic? Any idea of ID so I can replace it?
Plus does the dash pressure gauge supposed to read at max when driving about?
Cheers
Paul
Hi Paul, No idea with ref to the part number but with ref to the OE oil pressure gauge when you initially turn the key it should read the engine oil level and when driving about it read's oil pressure it should go up and down dependant on the rpm's you are doing obviously the higher the rpm the higher the oil pressure over 3000rpm you want to say at least 40psi, idle should be around the 15-20psi so around 1-2 on the OE dash gauge normal driving will be above number 4 on the OE dash
modfather
13-12-2010, 11:17
i got 1 of those hoses in very good useable condition pm me if you want it mate :)
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.