Log in

View Full Version : Fabricaion - found a good engineer!


TNT ANDY
07-12-2010, 22:26
Hi there,

If anyone needs any fabrication work doing, I've come across a very good chap over here on the east coast who can pretty well make anything in most materials. He's semi retired and does work from his own well equipped workshop so prices are very reasonable.

He's just done some caliper extenders for Handy Andy for £70.00 and turned them out in just over 2 days from receiving the drawings from Andy.

I'll attach a few pics so you can see the work. If anyone needs anything doing then drop me a pm and I'll get in touch with the man.

http://www.rtoc.org/files/Technical%20Files/Fabrication/DSCF3820.JPG

http://www.rtoc.org/files/Technical%20Files/Fabrication/DSCF3822.JPG

http://www.rtoc.org/files/Technical%20Files/Fabrication/DSCF3821.JPG

http://www.rtoc.org/files/Technical%20Files/Fabrication/DSCF3823.JPG
:smokin:
markey b
07-12-2010, 22:33
surely the bannister is going to rub on the disc :cooter:
raider_gtt
07-12-2010, 22:39
i like gd job :agree::agree:
J$£5GTT
07-12-2010, 23:19
that plastering looks abit ruff!!!....:cooter:
TNT ANDY
08-12-2010, 18:55
that plastering looks abit ruff!!!....:cooter:


I'll send big phil round - you can tell im:p
djinuk
08-12-2010, 19:03
theres a place local to me dude and they are so so cheap.. i shopped around to have my wheel centres bored out and kept gettin quotes of around £20 a wheel, in the end this place did all 4 of them for £30 and within 48 hours.. also they made me a new piece for my spray gun at £5..

Great guys and in future ill take all my work to them.
TNT ANDY
08-12-2010, 21:45
theres a place local to me dude and they are so so cheap.. i shopped around to have my wheel centres bored out and kept gettin quotes of around £20 a wheel, in the end this place did all 4 of them for £30 and within 48 hours.. also they made me a new piece for my spray gun at £5..

Great guys and in future ill take all my work to them.
:agree::agree::agree:

Always good to know these peeps.
HAndy
10-12-2010, 17:18
just to add, the extenders fit spot on and are designed for the wilwood 4 pot midilite calipers/ 25.4mm disc width, and are designed to fit the 285mm discs, this was a cheaper option than buying a "kit" with there funny offset disks and expensive pad systems, if anybody is interested they can be found on rally designs and are good value for £££
and the cad designs are saved on matey's cnc machine if anybody is interested in the extenders brackets, making fitting four pots to there pride and joy more affordable :cool: