standard elbow and t28

[REGGY5GT]

done a bit of reading, just want to know out of interest, does a standard c1j t2 elbow below fit on a t28 exhaust housing?? if so which way would the outlet face as i cant match the bolts up in the pics.just trying to get ideas together to fabricate a temperary downpipe for b18ft until i can get a stainless one made up. thanks

http://img56.imageshack.us/img56/4686/p1090504as7.jpg

http://t0.gstatic.com/images?q=tbn:ANd9GcQeG8So7p3y-95GDfHQCPrzz48kX_EDJy0xi1ji2nyjWRnHKTE&t=1&usg=__uHndznrcv7Ci_LAeasd4Yi0ZGaA=

[James5]

I think the standard t2 rear elbow will fit the T25 / T28 rear exhaust housing on a t25 / T28 is is merely missing out a hole for the one of the T28 bolt's so most peeps just run a longer bolt and a thickish washer to grip the rear elbow tight to the rear of the turbo.

I could be wrong here, i am sure someone else whom has a t28 can confirm:scratch:

[TrixNFlix]

Mine wouldn't mate up. :p

[car.crash]

You can get about 3 bolts in.

[REGGY5GT]

hmm, done a bit more searching and came up with some sort of setup,the links below, if i bought this setup then it gives me adjustability swivel wise to and from bulkhead, then mate the bottom of the elbow to my existing downpipe, what you think lads??

http://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Code=ATP-FLS-023&Category_Code=ATP-FLS1

then

http://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Code=ATP-MDP-002&Category_Code=MDP

[Woznaldo]

Someone used to sell a conversion elbow that had a machined flat and a bush insert. Had a quick surf but cant seem to find it?