View Full Version : Lower Windscreen surround Part No.?
Matt Cole
11-10-2010, 08:59
Can someone please provide the part number for a lower section of the windscreen surround?
think it might be this
6006001970 windscreen clip
is it this ?
http://www.cgbmotorsport.net/windscreen-surround-t-piece-603-p.asp
77 51 626 972 for complete surround:agree:
Matt Cole
11-10-2010, 10:02
77 51 626 972 for complete surround:agree:
Thanks chaps,
Yes thats the part no. for the complete surround, i was told there may be a half surround (lower section) avaialable, ie minus the pillar sections and the roof bit. Can't see it in diologies though?:scratch: Can anyone confirm this??
I've never seen one, we always had to cut off what we needed when i worked at renault body shop,but they might do,as our parts manager was to lazy to look into it further,cant you get lower section from the likes of adrian panels etc.
Matt Cole
11-10-2010, 10:27
I've never seen one, we always had to cut off what we needed when i worked at renault body shop,but they might do,as our parts manager was to lazy to look into it further,cant you get lower section from the likes of adrian panels etc.
Dominic cheers for the info. There are no surrounds listed on Hadrian Panels website? I guess they only do a selection of common panels for each car??
yer true, sorry i can't help anymore:(
http://www.rtoc.org/boards/attachment.php?attachmentid=1266&d=1233767734
£180.51 + Vat (£207.59 inc Vat).
http://www.rtoc.org/boards/member.php?u=380
speak to this man think he gets a good discount
Matt Cole
11-10-2010, 10:55
http://www.rtoc.org/boards/attachment.php?attachmentid=1266&d=1233767734
£180.51 + Vat (£207.59 inc Vat).
http://www.rtoc.org/boards/member.php?u=380
speak to this man think he gets a good discount
Ian thanks matey, which part is that then? What i need is the bottom half of number 5? I think the other part shown no 5 is part of the inner scuttle.
speak to Michael i know he has had dealings in this part before mate :)
might be worth a phone call to these too
http://www.auto-paints4u.co.uk/body-panels/renault/renault-5/renault-5-1985-1993.html?p=3
phase i 16 v turbo
11-10-2010, 11:07
Thanks chaps,
Yes thats the part no. for the complete surround, i was told there may be a half surround (lower section) avaialable, ie minus the pillar sections and the roof bit. Can't see it in diologies though?:scratch: Can anyone confirm this??
It hasn't been avaiable for years now the lower section. The complete surround is also na. I have one left but am keeping it for my car.
Jimmy_GTT
11-10-2010, 11:39
http://www.rtoc.org/boards/attachment.php?attachmentid=1266&d=1233767734
Can someone please tell me the part number of #15 (maybe also the price)?
Should it be inserted as in this picture? Because in Whitey the nuts were under the dash.
Can someone please tell me the part number of #15 (maybe also the price)?
Should it be inserted as in this picture? Because in Whitey the nuts were under the dash.
The nuts for the bracket for the battery tray should be under the dash and a re a pain in the arse to get to, but most peeps when putting it the bracket back in will put the bracket back in the other way so the nuts will be in the bay
Matt Cole
11-10-2010, 13:24
It hasn't been avaiable for years now the lower section. The complete surround is also na. I have one left but am keeping it for my car.
Mike have you a picture of the lower panel and a part number?
phase i 16 v turbo
11-10-2010, 13:29
The nuts for the bracket for the battery tray should be under the dash and a re a pain in the arse to get to, but most peeps when putting it the bracket back in will put the bracket back in the other way so the nuts will be in the bay
They where fitted from Renault with the nuts in the engine bay. The bracket will be held in place with the sound deadening over the centre section. The picture also shows which way round they go.
phase i 16 v turbo
11-10-2010, 13:31
Mike have you a picture of the lower panel and a part number?
No, it was so ,long ago. I wasn't a Renault panel it was from a third party.
Matt Cole
11-10-2010, 13:35
No, it was so ,long ago. I wasn't a Renault panel it was from a third party.
Ok thanks. Shame though as plenty of cars are rotting round the windscreens. With no replacement panels i guess we are looking at hand made.:cry:
They where fitted from Renault with the nuts in the engine bay. The bracket will be held in place with the sound deadening over the centre section. The picture also shows which way round they go.
:laugh: looks like some idiot in the past on mine put it the back in the hard way then:scratch::laugh::wasntme:
Jimmy_GTT
11-10-2010, 15:07
:laugh: looks like some idiot in the past on mine put it the back in the hard way then:scratch::laugh::wasntme:
And also on Whitey. ;)
But I do not think that was ever touched. The nuts were like brand new under the dash.
And all the other 4 nuts are facing away from the tray.
To put this clamp in the other way you have to remove the dashboard and the sound deadening. I think it was fitted both way. Maybe depends on the year of make.
Mat, the way to do it might be to find a 5 somewhere and just cut the whole panel out through the roof pillars and the inner wings to keep it complete. Then grind the back of the panel off to save drilling the spots out. That way you can keep the panel intact and not damage it?
Matt Cole
11-10-2010, 21:12
Mat, the way to do it might be to find a 5 somewhere and just cut the whole panel out through the roof pillars and the inner wings to keep it complete. Then grind the back of the panel off to save drilling the spots out. That way you can keep the panel intact and not damage it?
Aye marrow, that would be the best solution. I'll pop round with the grinder!:D
Aye marrow, that would be the best solution. I'll pop round with the grinder!:D
No probs, you can hack this pc up whilst your on... I WANA GO RACING :(
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.