fitting choke cable

[matty j]

as above for some reason it seems longer then the one i have on? ive threaded it through where i think it goes but when fitted to the carb it deosnt move on the slider??

[car.crash]

have you fitted the clip to hold the cable in place on the carb?

[car.crash]

http://i8.ebayimg.com/08/i/001/15/5e/78d2_35.JPG

[matty j]

http://i8.ebayimg.com/08/i/001/15/5e/78d2_35.JPG

Yea mate that's fitted? Got tonnes of aditional cable on it do
I cut it down??

[car.crash]

no you dont cut the choke cable. explain where you routed the cable.

[matty j]

Fed it through the wing into the battery tray area then onto the carb I must have 8inches of cable extra???

[car.crash]

from the choke lever in the car through the bulk head
through the drivers wing
out of the hole in the drivers inner wheel arch into the engine bay
back up to the drivers strut and then onto the carb.

i think thats right off the top of my head :confused:

[Kris M]

Ive drawn the route of the cable in red.....thanks big steve for the pic ;)

http://www.rtoc.org/boards/album.php?albumid=53&pictureid=13172

[matty j]

Ace I know where I've gone wrong I've gone into the hole in the battery try lol :)