PDA

View Full Version : What make of afr gauge



mk5gtt
30-08-2010, 19:37
New poster! (less than 10 posts)

Hi just want to know what type of afr gauge or kit do people use and how much are they. are they just plug n play things or do they have to be setup professionally bit new to carbs and setting up always had efi. Thanks for any advise

SCHWARTZ
30-08-2010, 20:09
lm1 seems to be the fave, lc1 cheaper but lots of people have had problems with them. both can be set up easily by yourself matey;)

car.crash
30-08-2010, 20:13
lm1 seems to be the fave, lc1 cheaper but lots of people have had problems with them. both can be set up easily by yourself matey;)
after innovates crap service i received i will never buy another. scoff stocks some good ones in his shop.

mk5gtt
30-08-2010, 20:53
New poster! (less than 10 posts)

What is the name of scoff shop

car.crash
30-08-2010, 20:54
http://www.efi-parts.co.uk/

mk5gtt
30-08-2010, 21:04
New poster! (less than 10 posts)

Might be being dumb here whitch one is the ln-1 gauge can't find it in scoffs shop does he sell it if not were would be able to get one from n wot price should I be looking at paying for it thanks

SCHWARTZ
30-08-2010, 21:12
lm1 not sold by scoffs shop.

SCHWARTZ
30-08-2010, 21:13
http://www.innovatemotorsports.com/products/MTS.php

car.crash
30-08-2010, 21:16
sorry i wasnt very clear, innovate lc1 have had bad press and are not very good according to many members and a quick google search will show the same. also my dealings with their customer service once they fail was enough for me to never recomend them.
scoff sells a differant brand which seem to be regarded as a better product.

TrixNFlix
30-08-2010, 21:18
I can't understand why people still buy innovate products, with the amount of problems that people seem to encounter. The aem wideband that scoff sells in his shop is bob on. I don't know of a single person who has had a problem with one.

SCHWARTZ
30-08-2010, 21:53
i personaly havnt had a problem with my lc1 but i bought that before i knew scoff sold them. If something was to go wrong with mine with out a doubt id get one of scoffs.

Saint AAI
31-08-2010, 08:42
I have the AEM UEGO one fitted to my Impreza, great price, looks good and is reliable. Will be getting one for the 5, but need loads of other things first.

Link! (http://www.efi-parts.co.uk/index.php?productID=204)

scott 5gtt
31-08-2010, 20:05
i used the glowshift one from cgb does the job for me

raj
31-08-2010, 21:18
i have an aem wideband fitted to mine. ive not had a chance to see it in use properly as ive not had the car on the road.

however, i think:scratch: it was marky mark who hooked up his lm-2? to my car and it came up with a different reading than what my aem was showing:confused: i dont know which one was right:confused::scratch:

Scoff
31-08-2010, 21:21
They should both read the same raj, or was the innovate stuck up the tailpipe ? If one was tailpipe and the other in the downpipe then maybe that's the reason. Under load they should be about the same though.

I still do the AEM's to club members for £158 + p&p, sold out though currently :cartman: Zeitronix are wonderfull if you have the budget and you like the look of the other features.

r5 rich
31-08-2010, 22:14
Marks is a lm1 and he has made a bracket for the exhaust tailpipe so it clamps on to it

SCHWARTZ
31-08-2010, 22:21
the thing that ****s me off with the lc-1 is the numbers move so fast that you can barley read the ****ers. Is this down to the gauge/probe etc... or the fact that its a carb and now with the volvo lump it shouldnt be that bad?