PDA

View Full Version : gtt dashbord wires unknown?



philg
23-07-2010, 21:19
Put the dash back in the car today but seem to have a couple of wires im not sure what they run or attach to

here are some pictures

JRP
23-07-2010, 21:24
Are they not for your clocks? prob very very wrong... or window buttons

philg
23-07-2010, 21:26
Don't think so the double plugs come more out the drivers side and the single white plug comes out the middle around the heater controls.

phil

JRP
23-07-2010, 21:28
i'll go have a quick look for you

modfather
23-07-2010, 21:32
i think in the 1st pic the black plug is for the clock the white 1 could be for the heater controls. i got my dash out at the mo so the wires are easy to get to. i can have a look at mine tomorrow probley be able to reckonise the wires/plugs better :)

philg
23-07-2010, 21:36
i think in the 1st pic the black plug is for the clock the white 1 could be for the heater controls. i got my dash out at the mo so the wires are easy to get to. i can have a look at mine tomorrow probley be able to reckonise the wires/plugs better :)

All connected unless i missed one :scared:

JRP
23-07-2010, 21:36
modfather milfing along in his automobile will be your best bet.. i just had a look.. but couldnt see wires alike.:sad:

philg
23-07-2010, 21:37
actually is the long wire not the one that runs up the a pillar to the interior light and fob remote?

modfather
23-07-2010, 21:41
All connected unless i missed one :scared:


i did think that in the 2nd pic that the black spade/plug goes to the handbrake,only think that as i put my carpet in today and i had to put a spaded wire onto the handbrake and it looks the same connection. not sure about the other

JRP
23-07-2010, 21:42
i did think that in the 2nd pic that the black spade/plug goes to the handbrake,only think that as i put my carpet in today and i had to put a spaded wire onto the handbrake and it looks the same connection. not sure about the other
thought that was purple.. or is that the reverse light?

modfather
23-07-2010, 21:47
actually is the long wire not the one that runs up the a pillar to the interior light and fob remote?


that 1st pic you put up is those wires 1 loom on its own black plug 1 end white plug the other if so that could be the wiring for the interior light and fob

modfather
23-07-2010, 21:49
thought that was purple.. or is that the reverse light?

yeap the wire itself is purple but the spade is black

philg
23-07-2010, 22:07
yeap the wire itself is purple but the spade is black


correct :)

philg
23-07-2010, 22:08
that 1st pic you put up is those wires 1 loom on its own black plug 1 end white plug the other if so that could be the wiring for the interior light and fob


It has the right sort of length on it to.


Just the single white one then lol :)

modfather
24-07-2010, 11:07
ok i had a look at my loom
1st pic: the black plug is for the interior light and the white plug for the fob sensor.
2nd pic: on my 5 the purple wire for that goes to the handbrake comes out from the loom that goes along the bottom of the drivers door to the relay behind the rear quater panel.
3rd pic :dont think it connects to anything as on mine that plug is cable tied to the the wireing for the window switches there aint no where i can see where that would join,i even looked on couple other looms i got here and they dont even have that plug on.

hope this helps in some way:)

philg
24-07-2010, 12:40
so i guess the last is just a spare :)

thanks

modfather
24-07-2010, 12:43
i would think so mate