Tubular manifold

[lee1707]

New poster! (less than 10 posts)

Has anybody bought the S/S tubular manifolds on Ebay from Germany?

http://cgi.ebay.co.uk/Edelstahl-Turbokrummer-Facherkrummer-Renault-5-GT-Turbo-/320554040980?cmd=ViewItem&pt=Autoteile_Zubeh%C3%B6r&hash=item4aa2827e94

Any feedback on quality or faults found with them?



http://www.kawi-trading.de/images/produkte/i53/533-faecherkruemmer-renault-gt5-01.jpg

[Bigfoot]

http://www.kamracing.co.uk/index.php/renault/renault-r5/exhaust/exhaust-manifold/raceland-4-1-manifold-renault-r5-gt-turbo.html

[J$£5GTT]

first time i have seen it,looks flash an thats about it,not bad price though if you want a blingy manifold for more show an not much more go...
:)

[jimmy_b]

ive got one of those on mine

http://img.photobucket.com/albums/v653/jamesnova/5%20turbo%20rebuild/DSC00915.jpg

http://img.photobucket.com/albums/v653/jamesnova/5%20turbo%20rebuild/DSC00920.jpg

only problem i had with it was that with my vnt and 2.5" downpipe, the manifold hit the downpipe so i had to dent it to miss the manifold.

other than that ive had no problems with it

:)

[rs250nut]

Have a little read of this

http://www.stainless-online.com/manufacturing/304-409-stainless.htm


The primarys are of un-equal length and the angle where they enter the collector looks a bit dodgy. And I bet it works no better than an o.e on which can be had for less than £20.

[Alastair]

Have a little read of this

http://www.stainless-online.com/manufacturing/304-409-stainless.htm


The primarys are of un-equal length and the angle where they enter the collector looks a bit dodgy. And I bet it works no better than an o.e on which can be had for less than £20.

You can also port out the OE ones where there are mior flow blockages for the studs, and match to a ported head.

[rs250nut]

You can also port out the OE ones where there are mior flow blockages for the studs, and match to a ported head.

I did with my last setup worked a treat, you can also do some work around the exit of cylinder one closest to the flange. I ruined two manifolds messing around with bits and pieces. When you start to see leaner afr's at the same boost you have got to be heading in the right direction.

[markey b]

i got mine from germany for £132 delivered about 3-4 months ago... yet to fit it yet, but need it to ease fitting of external gate