sill replacement

[lammy2r5]

evening all, does anyone have any good replacing sill photos cheers

[michael tierney]

i've got photos for the inner sill replacement on my profile...under jack and sill replacement..:)

[michael tierney]

i fitted 1.5mm galvanised steel sheet for the inner ones with my gasless mig and a lot of practice on scrap bits to get the current and feed/technique right!!:)

[lammy2r5]

did you do any inner sill replacement from within the car or did you just find good metal from the old inners thanks for your help. do you know of any other photos on here

[michael tierney]

the top half of the old sill was ok so after i cut it away i joggled the new plate and welded it to it and the floor.i think the joggler was around £50 but the sheet metal was only a fiver!:)

[lammy2r5]

what is a joggler please

[Matt@CodeRedMotorsports]

what is a joggler please

Google 'joddler' and you will see....
It's basically a tool for overlaying a metal sheet over another.

[lammy2r5]

ignore that its a tool thanks for your help mate

[phase i 16 v turbo]

what is a joggler please

Worth every penny if you are planning on doing some body work.