PDA

View Full Version : turbo oil feed help


SCHWARTZ
21-06-2010, 19:28
im going to get a turbo oil feed hose made up by hose solutions but need to know thread sizes. so does anyone know the thread pitch and size (whatever you need to know im no good with threads:confused:) of the take off from the block and also the thread of the standard t2? Im using a t2/25 but have an adaptor to suit. Also does the hose its self need to be a particular size at all?
adamwallace1989
22-06-2010, 15:23
almost positive its a m14 1.5 pitch thats what i ordered any way :)
SCHWARTZ
22-06-2010, 20:32
cheers matey.
SCHWARTZ
03-07-2010, 17:35
ordered a manifold to keep the turbo in the same position as on the c1j. can anyone help me on oil hose feed length? i want to order the hose asap an dont have the manifold yet otherwise il have to wait:sad2: also can anyone confirm the thread sizes i need to order???
Markey Mark (BD)
03-07-2010, 21:49
ordered a manifold to keep the turbo in the same position as on the c1j. can anyone help me on oil hose feed length? i want to order the hose asap an dont have the manifold yet otherwise il have to wait:sad2: also can anyone confirm the thread sizes i need to order???

I'm planning to get all my oil lines mate up soon so can let you know of the length.

What manifoild have you gone for mate?
dave r5
03-07-2010, 22:59
do u have a link for the manifold u bought fella
and how much was it
SCHWARTZ
03-07-2010, 23:04
its only a cheapo manifold made by big jim log type mild steel manifold. cots should be around £200 but will keep the turbo in the same place as the the c1j which should save the down pipe cost.
dave r5
03-07-2010, 23:25
not bad better than the £500 i was told once

cheers fella may start to save, post a pik wen u can plz
SCHWARTZ
03-07-2010, 23:34
yer defo will do should be finished by wednesday so should have it a few days after.
Markey Mark (BD)
04-07-2010, 16:01
not bad better than the £500 i was told once


That'll be my one i told you about mate. :D;)
SCHWARTZ
23-07-2010, 22:43
my manifold is now sorted and should have been here today but you know what the post is like.:rolleyes:
hopefully it turns up tomorrow and il get some pics up. Final cost was £225 inc postage etc... not bad and should see me for what i want to do.
marky you have any luck with those oil lines? or anyone know the thread sizes for the standard oil feed where it meets the oil pump and the thread for a t2 turbo?
Markey Mark (BD)
23-07-2010, 23:24
I've got my engine out now mate so will be having the lines made up soon.

Stick the pics up of your manifold whens its done, be good to see it.