TrixNFlix
20-06-2010, 19:39
Right made some measurements the other day so this will hopefully help you lot with ordering and reusing gtt and the volvo pipes.
These were done with a vernier and a rough guide.
Dimensions of water pipes on b18ft head:
Large outlet = 21mm
medium outlet = 14mm
Small outlet = 10mm
Thermostat = 35mm
Metal water pipe inlet (situated under thermostat) = 20mm
Large return to water pump = 32mm
Small return to water pump = 14mm
Renault 5 diesel rad inlet and outlet = 32mm
Turbo water outlets = 15mm
Gtt header tank:
Top = 10mm
Both bottom outlets = 24mm
Heater Matrix = 18mm
Turbo inlet and outlet = 51mm
Air Flow Meter = 70mm
Volvo breather = 14mm
Volvo throttle = 63mm
These were done with a vernier and a rough guide.
Dimensions of water pipes on b18ft head:
Large outlet = 21mm
medium outlet = 14mm
Small outlet = 10mm
Thermostat = 35mm
Metal water pipe inlet (situated under thermostat) = 20mm
Large return to water pump = 32mm
Small return to water pump = 14mm
Renault 5 diesel rad inlet and outlet = 32mm
Turbo water outlets = 15mm
Gtt header tank:
Top = 10mm
Both bottom outlets = 24mm
Heater Matrix = 18mm
Turbo inlet and outlet = 51mm
Air Flow Meter = 70mm
Volvo breather = 14mm
Volvo throttle = 63mm