PDA

View Full Version : Accel cabel



Yellow
27-05-2010, 22:16
Can any one put up a phot of the rear of the carb were accelerator cable attaches to it. I'm abit confused to how it's routed. :crap:

J$£5GTT
27-05-2010, 22:47
http://www.rtoc.org/boards/album.php?albumid=23&pictureid=962



(http://www.rtoc.org/boards/album.php?albumid=23&pictureid=962)

(http://www.rtoc.org/boards/album.php?albumid=23&pictureid=962)

Yellow
28-05-2010, 06:15
Cheers for that bud. Damm i think I've got the two brackets that bolt to the inlet the wrong way round. ;)

phase i 16 v turbo
28-05-2010, 09:12
Hi Ben, I will have a look later if you are around.

Cheers
Mike

BriC
28-05-2010, 11:53
Why does mine come in from the other side? Is it different on different years?

Yellow
28-05-2010, 12:05
Why does mine come in from the other side? Is it different on different years?

That's just what I've been thinking mate. :scratch:
nice one mike hopefully see ya in a bit mate.

BriC
28-05-2010, 12:09
That's just what I've been thinking mate. :scratch:
nice one mike hopefully see ya in a bit mate.

Yeh..

I'll take a pic of mine if you want? Think it's basically the same, but just from the other side :)

Brigsy
28-05-2010, 12:18
The later gtt's from what i have seen have the cable fixed on from the passenger side, earlier models are fixed from drivers side.

I always wondered why they decided to route the cable above the turbo, can only think the linkage must be shared with the left hand drive cars.

BriC
28-05-2010, 12:23
The later gtt's from what i have seen have the cable fixed on from the passenger side, earlier models are fixed from drivers side.

I always wondered why they decided to route the cable above the turbo, can only think the linkage must be shared with the left hand drive cars.

Fair enough :agree: