Brakes

[TrixNFlix]

Currently doing this conversion to a campus, and wondering what to do with the brakes. I am leaving the rear drums on, but may be changing the fronts to gtt calipers. Is the campus servo and master cylinder adequate? regards andy

[Haz]

leave the rear beam on like you say, the handbrake works miles better than a gtt. camus shocks, springs and hubs are fine but you may want gtt stuff if lowering etc anyway. leave all the campus servo etc on, can even leave the resevoir in place but may be worth makin a little heat sheild and the exhuast manifold isn't too far away, although i've had no problems

[TrixNFlix]

leave the rear beam on like you say, the handbrake works miles better than a gtt. camus shocks, springs and hubs are fine but you may want gtt stuff if lowering etc anyway. leave all the campus servo etc on, can even leave the resevoir in place but may be worth makin a little heat sheild and the exhuast manifold isn't too far away, although i've had no problems

Thanks haz. :agree: