wheel fitment question

[raj]

just a quick one referring to centre bore size,

take the renault centre bore diameter of 60.1mm, now could someone tell me if this if the size of the centre bore of the wheel OR the outside diameter of the std spigot/disc that the wheel is fitted over?

[RoboEK]

Im not sure on the exact size for a renault but if 60.1 is the info you have for a renault then it will relate to the inner of the spigot ring as this is the part that meets up the the hub. The outer size on the spigot ring will differ depending on who makes the wheel ( i.e wolfrace is a differant size to team dynamics) and the inner of the spigot will differ depending on the car.

[raj]

Im not sure on the exact size for a renault but if 60.1 is the info you have for a renault then it will relate to the inner of the spigot ring
you mean the centre bore of the Wheel.?


The outer size on the spigot ring will differ depending on who makes the wheel ( i.e wolfrace is a differant size to team dynamics) and the inner of the spigot will differ depending on the car. not quite getting what you mean:scratch:

[raj]

the way ive always thought it is as follows..

renault hub outer diameter = 60mm
std renault wheel bore = 60.1mm

the hub diameter has to be slightly smaller (60mm) for the wheel to be able to slot over it yes?

OR

the hub is 60.1mm and the std renault wheel bore is just over 60.1mm?

anyone got a brake disc that they can measure the outer diameter bore of?

i basically need the measurements for custom spacers.

[raj]

can somebody confirm? i dont want to end up giving the wrong measurements for the spacers.:scratch: