C2J to C1J

[Kenobi]

ok so the Monaco is being treated to a transplant.

Im hoping you guys can help me build a check list of parts i will need.

Remember this is an auto 1.4 so im going to need everything to swap from auto to manual.

fire away.

[Markey Mark (BD)]

You should have the list i gave you already to do the box swap to manual

[Kenobi]

You should have the list i gave you already to do the box swap to manual

I dont know where I put that list dude.

[rogerreno]

I dont know where I put that list dude.

Its a good job your heads bolted on...you'd lose that too!! :p

[Kenobi]

Its a good job your heads bolted on...you'd lose that too!! :p

LOL come on Mr Hewitt, what am I gunna need.

[Markey Mark (BD)]

You need
-engine with turbo and carb
-wiring loom
-hoses
-intercooler
-swirl pot and degassing chamber
-all brackets
-exhaust down pipe and poss system
-fuel pressure regulator
-fuel pump
-rad and fan
-clutch
-gearbox
-release fork
-clutch cable
-gearbox mounts
-poss driveshafts (don't know if auto are same)
-gearstick and selector rod
-pedal assembly

There's prob more that i've missed but its a start

[r5 rich]

I got a perfect set of driveshafts and a 209 aei along with some magnecor 8mm leads, and gt turbo clocks

[rogerreno]

LOL come on Mr Hewitt, what am I gunna need.

I reckon your gonna need to stop playing with your Grannys shopping car and buy another GT....much easier!! :laugh:

[Kenobi]

engine with turbo and carb
-wiring loom
-hoses Got Some :agree:
-intercooler Got :agree:
-swirl pot and degassing chamber got :agree:
-all brackets
-exhaust down pipe and poss system
-fuel pressure regulator got :agree:
-fuel pump got :agree:
-rad and fan got :agree:
-clutch
-gearbox
-release fork
-clutch cable
-gearbox mounts
-poss driveshafts (don't know if auto are same)
-gearstick and selector rod
-pedal assembly

[Kenobi]

I reckon your gonna need to stop playing with your Grannys shopping car and buy another GT....much easier!! :laugh:

My Granny aint as old as you Roger :p:cooter:

[r5 rich]

also got swirl pot, degasing chamber and header tank brackets

[Markey Mark (BD)]

just thought of few more bits

-aei unit
-boost hoses
-brakes (if there not same already on front)
-speedo cable (if you use gt box)

[modfather]

i got shed load of stuff

clutch cable
cut loom :cry:
release fork
loads of brackets
gearbox brackets
will have pedals availible when i put my chrome 1s on
cross over pipe
selector rod

[Kenobi]

engine with turbo and carb
-wiring loom
-hoses Got Some :agree:
-intercooler Got :agree:
-swirl pot and degassing chamber got :agree:
-all brackets
-exhaust down pipe and poss system
-fuel pressure regulator got :agree:
-fuel pump got :agree:
-rad and fan got :agree:
-clutch
-gearbox
-release fork
-clutch cable
-gearbox mounts
-poss driveshafts (don't know if auto are same)
-gearstick and selector rod
-pedal assembly
-aei unit :agree:
-boost hoses :agree:
-brakes (if there not same already on front)
-speedo cable (if you use gt box)

[Kenobi]

Will i need GT Turbo clocks?

[rogerreno]

just thought of few more bits

-speedo cable (if you use gt box)

Surely you mean speed sensor, loom and instrument panel....when was the last time you saw a GT with a speedo cable?? :confused:

Got to put it in simple terms for him!!! LMAO!!!

And i'm not old yet.....:laugh:

[rogerreno]

I remembered something important......a gullable mug to do it all for you!!! :laugh:

[Kenobi]

I remembered something important......a gullable mug to do it all for you!!! :laugh:

Your not gullable Roger.

[Markey Mark (BD)]

Surely you mean speed sensor, loom and instrument panel....when was the last time you saw a GT with a speedo cable?? :confused:

Got to put it in simple terms for him!!! LMAO!!!

And i'm not old yet.....:laugh:

Yes i forgot we are taking about Kenobi here! :laugh:

Speedo sensor Kenobi, both halfs of it if your using gt box and clocks

[Moggy]

and use the cam out of the C2J engine!

Dr Glen even said that the auto c2j had a different cam to a manual c2j! dunno if its true

but having spend a whole day in a scrappy with sparkie taking one out, its got to be worth a shot!

[THE MASTER]

and use the cam out of the C2J engine!

Dr Glen even said that the auto c2j had a different cam to a manual c2j! dunno if its true

but having spend a whole day in a scrappy with sparkie taking one out, its got to be worth a shot!

cams from auto's produce more torque at the lower rev range
;)

[Markey Mark (BD)]

cams from auto's produce more torque at the lower rev range
;)

Hmmm, interesting to know.

[Kenobi]

WOW, amazing what you can learn from you lot.

I shall indeedy use the cam then.

:agree:

[BriC]

I've got a gearbox that's yours for uber cheap :)

[Kenobi]

I've got a gearbox that's yours for uber cheap :)

Sold thanks Bric. :agree:

[Chris Hebden]

Are the fuel lines a wider diameter on the GTT?

[Alastair]

cams from auto's produce more torque at the lower rev range
;)

Are they a better profile or just an advanced standard cam? Anyone know the lift - i can't access the tech apps from this terminal.

GTT fuel lines (and return lines/aux tank are different, so are the fuel breathers).

[Shane P]

Would you not prefer an F series engine instead?

[Kenobi]

Would you not prefer an F series engine instead?

No man C1j all the way for me. :agree:

[Haz]

-engine
-all brackets
-exhaust down pipe and poss system
-clutch
-release fork
-clutch cable
-gearbox mounts
-driveshafts
-gearstick and selector rod
-pedal assembly
-brakes
-speedo cable

got ;) you change ya mind more than ya socks! should have brought them with the car as i knew ya wouldn't leave it alone. go volvo, you've owned gtt's, why go backwards? lol

[Kenobi]

-engine
-all brackets
-exhaust down pipe and poss system
-clutch
-release fork
-clutch cable
-gearbox mounts
-driveshafts
-gearstick and selector rod
-pedal assembly
-brakes
-speedo cable

got ;) you change ya mind more than ya socks! should have brought them with the car as i knew ya wouldn't leave it alone. go volvo, you've owned gtt's, why go backwards? lol

So you have all that stuff fella? Pm with the damage.

[Kenobi]

Thanks to everyone for helping with my list.

engine (Markey) :agree:
turbo :agree:
carb
-wiring loom
-hoses Got Some :agree:
-intercooler Got :agree:
-swirl pot and degassing chamber got :agree:
-all brackets Need to know which on the Monaco I can use
-exhaust down pipe and poss system
-fuel pressure regulator got :agree:
-fuel pump got :agree:
-rad and fan got :agree:
-clutch
-gearbox (Bric) :agree:
-release fork
-clutch cable
-gearbox mounts
-poss driveshafts the monacos are thinner.
-gearstick
selector rod :agree:
-pedal assembly
-aei unit :agree:
-boost hoses :agree:
-brakes (if there not same already on front)
-speedo cable (if you use gt box)

[BriC]

I've got a couple of exhausts and a downpipe too.

[Kenobi]

I've got a couple of exhausts and a downpipe too.

Pm how much money your after fella. :agree:

[modfather]

i got a loom but has been cut i think i also got
clutch cables
release fork
front calipers

[Kenobi]

i got a loom but has been cut i think i also got
clutch cables
release fork
front calipers

Cut where fella?

[modfather]

Cut where fella?

im not 100% sure where its cut (it might not be cut at all ) i will go up the garage tomorrow and dig it out :)

[phase i 16 v turbo]

Got the lot.:wasntme:

[modfather]

ive had a look at the loom there is just a couple spades missing all plugs are on and does have relays

[Kenobi]

ive had a look at the loom there is just a couple spades missing all plugs are on and does have relays

So thats a good loom then fella. Pm me how mucho?

[modfather]

So thats a good loom then fella. Pm me how mucho?

you got 1 incoming :D

[Kenobi]

engine (Markey) :agree:
turbo :agree:
carb (important part of the puzzle)
-wiring loom
-hoses Got Some :agree:
-intercooler Got :agree:
-swirl pot and degassing chamber got :agree:
-all brackets Need to know which on the Monaco I can use
-exhaust down pipe and poss system
-fuel pressure regulator got :agree:
-fuel pump got :agree:
-rad and fan got :agree:
-clutch:agree:
-gearbox (Bric) :agree:
-release fork
-clutch cable
-gearbox mounts
-gearstick
selector rod :agree:
-pedal assembly
-aei unit :agree:
-boost hoses :agree:
-brakes (if there not same already on front)
-speedo cable (if you use gt box)
-Rear Beam
-Rear Discs
-Rear Calipers
-Rear pads
-Rear Brake lines? how would this work?


ok Im back on with hunting down said bits at cheapo prices, Wife stepped into a conversation I was having and basically said "No Way" to the money i was gunna spend. She was being very serious aswell as usually she says nothing at all about my Renault Fun.