View Full Version : gauge mount in place of clock ..?
is there anything available that would enable me to fit a 52mm gauge where the clock is currently located.?
Markey Mark (BD)
23-04-2010, 15:59
is there anything available that would enable me to fit a 52mm gauge where the clock is currently located.?
There's that GT Tuning mount they made that aloud you to fit a guage where the clock went, just finding one though is the next mission.
You could make your own though if you wanted to.
Penfold aka The Dealer
23-04-2010, 16:10
Anybody know a mount that you can suction mount to the windscreen... like you do with sat nav? Instead of cutting holes in the dash?
jesus in the seat of a 5
23-04-2010, 16:40
Anybody know a mount that you can suction mount to the windscreen... like you do with sat nav? Instead of cutting holes in the dash?
just buy a pod with a stand, then stick it down...if ya get bored, white spirit is your friend..it never happened...look on rally nuts website for cheap but good models..:)
dangerous dave
23-04-2010, 18:02
i have a gt tuning holder for the clock hole.. its pretty simple but if someone wanted to copy it and get some made your more than welcome to borrow it.. a mate used it as a template to make a simple gauge holder, not angled tho..
ive literally just finished making my own, i forgot i had a coin holder that fitted to some 5's in place of the clock, i chopped it here n there and its 99% sorted:)
all i need now is a piece of plastic, carbon fibre or something to glue over the modded piece,then drill a 52mm hole into it and it'll be 100% :)
TrixNFlix
23-04-2010, 19:07
ive literally just finished making my own, i forgot i had a coin holder that fitted to some 5's in place of the clock, i chopped it here n there and its 99% sorted:)
all i need now is a piece of plastic, carbon fibre or something to glue over the modded piece,then drill a 52mm hole into it and it'll be 100% :)
Get some pics up Raj, I wanna see :)
Get some pics up Raj, I wanna see :)
as you can see, i just need to sandwich a peice of carbon fibre or something with a predrilled 52mm hole inbetween the gauge and that plastic modded bit.
http://www.rtoc.org/boards/picture.php?albumid=919&pictureid=11132
car.crash
23-04-2010, 20:58
logg put a 52mm hole cutter straight through the digital clock. my gauge sits perfectly tight and flush and if i want it oe again i will use one of my spare clocks.
Penfold aka The Dealer
23-04-2010, 21:07
logg put a 52mm hole cutter straight through the digital clock. my gauge sits perfectly tight and flush and if i want it oe again i will use one of my spare clocks.
:agree: This is what I have done in the past & made sure i used a duff clock tho :)
Or if you feel flush new clocks are £80+ new from renault...
car.crash
23-04-2010, 21:08
:agree: This is what I have done in the past & made sure i used a duff clock tho :)
Or if you fill fluch new clocks are £80+ new from renault...
i binned 4 of them! woops
i could do with one of these, could this be something that could be available in the future as a group buy?
obviously it will need someone to manufacture these, any ideas?
car.crash
23-04-2010, 21:58
http://i110.photobucket.com/albums/n105/marcsmith1481984/my%20car/Picture233.jpg
http://i110.photobucket.com/albums/n105/marcsmith1481984/my%20car/Picture233.jpg
just the pic i need for the following question.........
see the dash flap above the gauge/clock(that isnt shut properly because its resting on the gauge:cooter:).. well could someone tell me if the fake switch/button to right of it (above the hot/cold heater knob) is removable or is it fixed as part of the dash.?
car.crash
23-04-2010, 22:20
i think that one is fixed, i cant see a join line in the pic like the others.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.