Rear discs

[garya]

What is the best way to take the rear discs off.and also will it damage the bearing,also should i get a new bearing when taking the discs off??:D

[HULK]

Discs come off as shown in the haynes manual. The bearings will be fine until you take them out of the disc then they will be knackered as they are quite hard to remove without destroying them. You will need either a bearing press or slip someone a fiver at a garage to do it for you or use a vice with a approrpiate sized socket to push them out

[garya]

right well thats answerd my question new bearings with my new discs ;).

[HULK]

No problem pal. Yes new bearings in the disc make life sooooooo much easier.

[Junglist]

just noticed one of my rear discs has a 1mm wide crack in it , so looks like ill be doin mine in the near future also :(

[Tinka_Dill]

right well thats answerd my question new bearings with my new discs ;).

I ordered new rear discs from CGB a while back with bearings fitted for a reasonable price (can't remember exact price but I didn't need to remortgage the house)..made life a lot easier.