KeefaGT
23-03-2010, 17:47
Hi all i have a few problems which i have been putting off but have to now fix to try and start the old girl
I have relocated my header tank and have converted from phase 1 coolant setup to phase 2 does anyone know if it matters which way round the bottom header tank hoses go as they look identical (phase 1 only had 1 hose at the bottom)
Also could anyone tell me if there is some sort of connector joining the top of the swirl pot to the hose as my hose is a very loose fit
I also have a few stray wires which need homing that come out of the loom by the fan switch/radiator one is a short yellow wire from the alternator to a blade connector??? and the other two are green and orange (fan switch??)
Hope someone can help:)
I have relocated my header tank and have converted from phase 1 coolant setup to phase 2 does anyone know if it matters which way round the bottom header tank hoses go as they look identical (phase 1 only had 1 hose at the bottom)
Also could anyone tell me if there is some sort of connector joining the top of the swirl pot to the hose as my hose is a very loose fit
I also have a few stray wires which need homing that come out of the loom by the fan switch/radiator one is a short yellow wire from the alternator to a blade connector??? and the other two are green and orange (fan switch??)
Hope someone can help:)