View Full Version : Phase 2 tungy
New poster! (less than 10 posts)
Just thort I'd start a progress thread for my 5. As you can see it's looking standard and pritty clean, still a few things I want to tidy up. My plans are to keep the standard look but have a bit more bhp to it. The car is used as a daily driver and I do my best to keep it in pristine condition. Here are a few pictures..
First thing I done was refurb the speedlines, I pay'd £180 and got them powdercoated at romax, well worth the money
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/007567e7.jpg
I got the wiper removed from the tailgate, I think it makes the tailgate look better..
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/539e032d.jpg
I changed the steering wheel for a 300mil omp. It cost £100 for the wheel and hub, I think there just as gud as the mo teams if not better, especially the price you pay, the 300mil feels like the rite size for the car
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/27f2fceb.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/f75c027c.jpg
I want the front dropping, I was thinking gaz coilovers or any better ideas?
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/d52fcc34.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/3616b453.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/bb2df9ce.jpg
private plate :cooter:
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/46ccc889.jpg
Fantastic looking five fella! Well done!!:agree:
The cheapest way to lower the front end is to purchase some -50mm lowering springs. Option B is a set of sports dampers which will give you adjustable damping with lowering springs fitted. If you have the money then yes Option C, a set of front coilovers will also do the job with the bonus being adjustable ride height.
Links below just to show options available, RTOC deal with companies that give us discount for suspension.
Option A: Lowering Springs
http://www.k-tecracing.com/show_product.asp?id=1076
Option B: Sports suspension
http://www.europerformance.co.uk/pages/products/product_info.mhtml?product=15346213
Option C: Coilovers
http://www.k-tecracing.com/show_product.asp?id=34
This was mine on -50mm springs
http://i323.photobucket.com/albums/nn442/Ricardo-1974/th_1010544ha8.jpg (http://s323.photobucket.com/albums/nn442/Ricardo-1974/?action=view¤t=1010544ha8.jpg)
Very nice car, how it should be kept. I wish I never removed my side stickers
The cheapest way to lower the front end is to purchase some -50mm lowering springs. Option B is a set of sports dampers which will give you adjustable damping with lowering springs fitted. If you have the money then yes Option C, a set of front coilovers will also do the job with the bonus being adjustable ride height.
Links below just to show options available, RTOC deal with companies that give us discount for suspension.
Option A: Lowering Springs
http://www.k-tecracing.com/show_product.asp?id=1076
Option B: Sports suspension
http://www.europerformance.co.uk/pages/products/product_info.mhtml?product=15346213
Option C: Coilovers
http://www.k-tecracing.com/show_product.asp?id=34
This was mine on -50mm springs
http://i323.photobucket.com/albums/nn442/Ricardo-1974/th_1010544ha8.jpg (http://s323.photobucket.com/albums/nn442/Ricardo-1974/?action=view¤t=1010544ha8.jpg)
Cheers mate it looks well sitting 50mm, the only springs iv seen advertised were 35mil, il problies just save for some coils and I can decide what hight and setting I want it at.
Very nice car, how it should be kept. I wish I never removed my side stickers
Thanks mate, I think they always look best with the decals on, cgb do a full set for £170
that is one of the cleanest sweetest tungys i have seen for a long time love it:agree:
firstchoicegary
11-03-2010, 19:09
i changed rubbers and mounts on mine cost hundreds and had uprated konis i think and 50mm lowering springs ride was tight but comfy, not sure if coilovers replace old existing mounts etc but if they do get coilovers would be cheaper
firstchoicegary
11-03-2010, 19:10
oh and torsion bar two or three clicks down.. i think
Cheers phil
yeh a think coilovers will be the `UÓ¼¢;§áp>D·c#my torsion bar must have been dropd a bit it's a lot lower than the front
fidos got a raider
11-03-2010, 20:33
The cheapest way to lower the front end is to purchase some -50mm lowering springs. Option B is a set of sports dampers which will give you adjustable damping with lowering springs fitted. If you have the money then yes Option C, a set of front coilovers will also do the job with the bonus being adjustable ride height.
Links below just to show options available, RTOC deal with companies that give us discount for suspension.
Option A: Lowering Springs
http://www.k-tecracing.com/show_product.asp?id=1076
Option B: Sports suspension
http://www.europerformance.co.uk/pages/products/product_info.mhtml?product=15346213
Option C: Coilovers
http://www.k-tecracing.com/show_product.asp?id=34
This was mine on -50mm springs
http://i323.photobucket.com/albums/nn442/Ricardo-1974/th_1010544ha8.jpg (http://s323.photobucket.com/albums/nn442/Ricardo-1974/?action=view¤t=1010544ha8.jpg)
same car different pic
http://i405.photobucket.com/albums/pp134/Notnormal08/my%20tungy%205/DSC00294-1.jpg
firstchoicegary
11-03-2010, 20:35
depends where you live 50mm was my limit i have a million speed humps everywhere around where i live
50mm and the torsion bar adjusted IMO makes it look just right, i'm pretty sure i changed the bearings and rubber donuts as well which makes a big difference :)
I can't believe how much a set of full Koni sports suspensions comes out at compared to a coilover kit :scared:
firstchoicegary
11-03-2010, 21:27
coilovers only front though aint they? are back shock non adjustable
coilovers only front though aint they? are back shock non adjustable
Adjustable ride height on the front, the rears are probably an uprated damper but height adjustment is on the torsion bar
Iv always preferd coilovers because you can choose the hight you want, there's not a great deal of speed bumps were I live but there's always a way of getting round things:D I was thinkin about getting some 195 45 13s I think it will look subtle il see wot I think wen
I lower it..
that looks amazing good effort. wish i had a tungy again :cry:
Matt Cole
12-03-2010, 08:31
i wouldn't do too much to that! It looks awesome!:agree:
tonesGTT
12-03-2010, 20:47
i wouldn't do too much to that! It looks awesome!:agree:
:agree:
Gave it a few coats of wax yesterday before I went over briggsys, put me rtoc sticker on the rear window:D and Briggs put a new intercooler on and adjusted the fuel/boost. car full of boost down Redcar seafront lol. :agree: Briggs
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/d2a6b0d5.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/dc5a4082.jpg
Being picky here, would look better with the oe side repeaters. That's just me though :ashamed: :)
Yeh il probs get round to gettin the originals, there ford the ones that are on? :scratch:
Yeh il probs get round to gettin the originals, there ford the ones that are on? :scratch:
Yeah they look like the old school 90s Mondeo repeaters or the ones you could buy from the motor factors back in the day :ashamed:
I know it's not much but something small still makes a difference especially when it looks original all round. You can buy them from Eurocarparts for about £5-6 each or someone might have a set knocking about in their garage :)
I also went to Renault to get 1 of their dealer tax disc holders too as it has the name and logo on it :ashamed:
Yeh ur rite mate, was just lukin at them there, cgb do them aswell. Is there many parts you can get from renault for 5s?
Yeh ur rite mate, was just lukin at them there, cgb do them aswell. Is there many parts you can get from renault for 5s?
I'm not sure TBH mate, it's been a good couple of years since i've purchased std parts for a 5. When i ordered from from Renault i'd have to pay upfront then they'd get them in either from England or from France which would take 3-4 days, that didn't bother me as the 5 was a 2nd car on the drive. Parts like plugs, oil filter etc you'd get from Eurocarparts or GSF.
The person to try for Renault parts nowadays seems to be Phase 1 16V IIRC
This was my old tungy
http://i323.photobucket.com/albums/nn442/Ricardo-1974/535rtoc06lj3.jpg
Ok mate cheers, il sort it out and get a few parts orderd, nice lookin tungy did it have much done to the engine? A mite get the t2/t25
Ok mate cheers, il sort it out and get a few parts orderd, nice lookin tungy did it have much done to the engine? A mite get the t2/t25
The bottom end, head and gasket were completely stock and untouched, boost was stock on a T2 turbo. strapped oe intercooler and carbon kevlar turbo heatshield. The only things changed in the engine bay was an induction type air filter and the boost circuit changed. I spent money on many oe parts like new boost hoses, expansion tank, hoses, straps, black vacuum hoses to keep it looking oe.
http://i323.photobucket.com/albums/nn442/Ricardo-1974/1010575li7.jpg
t2/25 & a bit more boost it will be flying mate, the motor in yours is fit enough:agree:
Looks well mate deffo oe!
t2/25 & a bit more boost it will be flying mate, the motor in yours is fit enough:agree:
:D that's the game Briggs
Got some o.e. repeaters in the garage you can have. no use to me, just prob have to wait until Pod, remind me if you need them and i'll bring them with me
Bit of an update for parts
Iv bought a t25
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/8e96bb17.jpg
gt tuning intercooler (bread bin)
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/cb04342c.jpg
new a.a.s backbox in 2weeks, either 3" or 3.5" outroll
Thort I'd give the car a good clean this weekend
jackd the car up and took all the wheels off, cleand the inside of the rims and seald them, degreaced the arches/gave them a coat of wax oil..
Degreace the archs
(before)
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/92289763.jpg
(after)
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/3ba02e06.jpg
the degreacer done the job well
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/39edf3ae.jpg
bilberry wheel cleaner is good stuff, gets rid of greace with out damaging the laquor on the paint as to products like wonderwheels
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/7a00abf6.jpg
poorboys wheel sealant it top dog, smells lush aswel
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/b08b5528.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/82d70609.jpg
gets a realy good shine and is a good sealant for brake dust
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/dd0da27b.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/a7a8a8ed.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/680ec451.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/ccb5caf1.jpg
products used..
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/7b900f02.jpg
First post!
Cracker that one mate;)
Your car's a credit to you mate:agree:
Absolutely lovely example - it glimmers............:smokin:
like it mate , like the deatailing write up as well , where did you get your poorboys from ??
i use polished bliss most of the time:)
like it mate , like the deatailing write up as well , where did you get your poorboys from ??
i use polished bliss most of the time:)
Alright matt, cheers, bought it from a detailing shop not far from were I live. Great shop they sell anything detail related..
Here's there website have a look mate!
http://www.northeastdetailingltd.co.uk/templates/default/index.php?page=view_home
Here's there website have a look mate!
http://www.northeastdetailingltd.co.uk/templates/default/index.php?page=view_home (http://www.northeastdetailingltd.co.uk/templates/default/index.php?page=view_home)
Just around the corner from my new gaff, If you're ever up there give us a shout and I'll stick the kettle on :)
Just around the corner from my new gaff, If you're ever up there give us a shout and I'll stick the kettle on :)
Sounds like a plan ashy! :coffee:
This car is the nuts. Love the plate too. If I can get mine to like half as good as this one I'll be a happy man. Good job. :agree:
This car is the nuts. Love the plate too. If I can get mine to like half as good as this one I'll be a happy man. Good job. :agree:
Cheers pal
Bought some turbines! Been after some for agers, there briggsys old ones, they have been powder coated with a polishd lip, I will be getting them re done cos there corroding a bit. I was thinking about silver like my 13s but a quite like the look of these, bit of a jon Briggs demo car at the minit lol
degreaced them first there was loads of muck on them
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/b03d9b34.jpg
took a few pics after
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/95b08bfd.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/ec46a0eb.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/f85b29f6.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/63ea119b.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/74f388f5.jpg
also popd over marks, bought these rear seats, in imaculate condition!
There was a tiny bit of chewing gum on them but iv sorted it out
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/dc063f40.jpg
Looks sweet mate, just like mine but lower:wasntme: i got them wheels refurbished 5-6 yrs ago so havent done bad!
Looks sweet mate, just like mine but lower:wasntme: i got them wheels refurbished 5-6 yrs ago so havent done bad!
bloody hell mate! That's mint, they are realy clean there's Just a few bits were the laquors came off, we'l have to get some pics of them both together!
Bought sone recaros, there in great condition for the age
give the carpet a bit clean under the seats!
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/ba1657c2.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/77c27d4d.jpg
forgott to take some pics of the rear seats, there trimd in the same recaro material
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/f3255030.jpg
got the speedlines back on, taking the turbines to romax today, getting new exhaust tomorow and putting my new rear bump strip on
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/9816f9a2.jpg
phase i 16 v turbo
18-05-2010, 12:39
S2 RS Turbo seats, very comfortable
S2 RS Turbo seats, very comfortable
They are mate!
TrixNFlix
18-05-2010, 13:29
They are great seats, but I am biased. :agree:
phase i 16 v turbo
18-05-2010, 14:55
I got a few sets.:wasntme:
TrixNFlix
18-05-2010, 15:09
I got a few sets.:wasntme:
Mike you've got sets of everything! :p
looks mint mate , thanks for the link , what tyre shine are you using ???:)
looks mint mate , thanks for the link , what tyre shine are you using ???:)
Cheers matt
I use Neilson mate, buy it in a 5ltr tub, iv got over 20ltrs in the garage lol, the only other tyre gloss I think is decent is autosmart which is similar to the Neilson and meguiars which smells lovley :D
Cheers matt
I use Neilson mate, buy it in a 5ltr tub, iv got over 20ltrs in the garage lol, the only other tyre gloss I think is decent is autosmart which is similar to the Neilson and meguiars which smells lovley :D
I use meguiars :D the purple bottle.smell like sweets lol.were did u get a 5ltr tub of neilsons from mate??
I use meguiars :D the purple bottle.smell like sweets lol.were did u get a 5ltr tub of neilsons from mate??
That's the one mate, get a bit on ya dash smells propa lush! There's a big Neilson van that delivers to garages but he comes in our gaff too, he's got all sorts, that tyre gloss is £20 and it lasts agers!
The car was at a.s.s today, got a 3" outrolld back box
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/03b59976.jpg
got the new bump strip on
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/0c0272a8.jpg
got the turbines painted, got them done at romax top job
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/7dff4d93.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/442f10a2.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/83d4baff.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/4dc37393.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/ece1fc85.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/dda0ef9b.jpg
I do personally prefer the speedlines, but it still looks mint on the turbines !!! :):D
Cheers mate car looks sweet yet again
The old girl is in my lockup to get a few jobs sorted at moment, exhaust manifold gasket, turbo upgrade etc.
Start with stripdown..
http://i319.photobucket.com/albums/mm453/Brigsygtt/Image0537.jpg
http://i319.photobucket.com/albums/mm453/Brigsygtt/Image0538.jpg
Tick tock
http://i319.photobucket.com/albums/mm453/Brigsygtt/Image0539.jpg
Bodywork is in awesome condition
http://i319.photobucket.com/albums/mm453/Brigsygtt/Image0541.jpg
i had to get mine done a few months ago, on boooost then pop!!!! :cry:
Haha Briggs you don't mess about mate! Goin straight for gold there! The manifold gasket has seen better days like, cheers for the pics keep us posted :D
Up to now i have done -
Inlet/exhaust manifold gasket & clean inlet up externally,
Fit new turbo/braided oil feed, hybrid t25 i think? Adam L special, Looks like a decent unit.
http://i319.photobucket.com/albums/mm453/Brigsygtt/Image0543.jpg
Fitted 2 1/4 downpipe with lambda bung & flowed cast elbow,
Adjust tappets, Fit chrome rocker cover & new gasket,
Rejet carb for 18 psi & refit(needs road testing to fine tune),
Fit braided oilcooler hoses to clear breadbin cooler,
Remove perc fan & associated wiring (all shot anyway),
Oil & filter change,
Fit capillary oil pressure/boost gauge, pipework into cockpit just need to fit gauges,
Fit various silicone hoses/alloy degas/headertank - Ongoing.
Sounds like a small job but i must have at least ten hours in already & not finished!
The engine bay didnt look like it had been touched for some time & needed a fair bit of maintenance despite running OK. The o.e water hoses were tired to say the least, most were shot & fell apart. Its slowly coming together though (no current pics as i forgot) will be finished at some point in next couple of days:)
All done just needs bonnet/grill fitting & fuelling check on road. As predicted the braided hoses leaked, i have flogged the fittings up & seems ok now but need to keep an eye on them!
Engine sounds sweet as a nut now with new manifold gasket & valve clearances set :cool:
http://i319.photobucket.com/albums/mm453/Brigsygtt/Image0552.jpg
http://i319.photobucket.com/albums/mm453/Brigsygtt/Image0551.jpg
http://i319.photobucket.com/albums/mm453/Brigsygtt/Image0553.jpg
not much of an update, its had a new alarm immobiliser done at turners, also fitted some 50mil springs with apex shocks
looking into getting my door cards re trimmed
just took a few snaps after work with the weather been half decent
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/tungy/DSC03034.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/tungy/DSC03013.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/tungy/DSC03010.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/tungy/DSC03032.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/tungy/DSC03038.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/tungy/DSC03029.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/tungy/DSC03026.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/tungy/DSC03027.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/tungy/DSC03028.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/tungy/DSC03033.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/tungy/DSC03031.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/tungy/DSC03018.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/tungy/DSC03024.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/tungy/DSC03037.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/tungy/DSC03008.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/tungy/DSC03017.jpg
benj.
Love how mint this car looked ...think it was at FCS ..kept walking by it and saying "that is a nice example!" :laugh: look forward to seeing more progress :D
Love how mint this car looked ...think it was at FCS ..kept walking by it and saying "that is a nice example!" :laugh: look forward to seeing more progress :D
Cheers mate. Yeh it was at fcs, no one took any pics of it though, yeh hopefully get more stuff done to it soon
looking very sweet ben love it mate
5alldaway
10-09-2010, 09:36
looks sublime mate
and those seats look like a nice upgrade, i bet they are more durable too
looking very sweet ben love it mate
Cheers Phil, how's yours going mate?
looks sublime mate
and those seats look like a nice upgrade, i bet they are more durable too
Cheers mate, yeh iv always loved the recaros, they are really comfy too, I mite get some of the bolsters re done
I think Im in love with your car :confused:, it looks bloody amazing top marks fella for keeping it so mint and another plus youve got Brigsy near buy to help sort you out.
Mat
I think Im in love with your car :confused:, it looks bloody amazing top marks fella for keeping it so mint and another plus youve got Brigsy near buy to help sort you out.
Mat
Cheers mat, iv spent quite a bit on it this year, and yeh Briggsy is the man to see he knows the lot
jesus in the seat of a 5
10-09-2010, 16:02
looking good ben, gonna see if i can get the phase 1 to that standard...:smokin:, as for brigsy...well "all hail , the carb queen"...:laugh:
looking good ben, gonna see if i can get the phase 1 to that standard...:smokin:, as for brigsy...well "all hail , the carb queen"...:laugh:
cheers jesus! im sure you will mate, briggs is the carb god :cool2:
Looking fresh as usual ben:agree::) Needs that t25 reconditioning & fitting though ;)
Looking fresh as usual ben:agree::) Needs that t25 reconditioning & fitting though ;)
cheers mate,
i no lol. think it will handle it this time? bit scared it mite **** its self again :scared: lol
well.. bit of an update!
couple of months ago my water pump went and the head gasket went as well :disagree: the head no longer had any meat on so was scrap. i bought a head off gtnutter also bought his engine that had been rebuilt by markey mark. my engine was due a rebuild so was an ideal opportunity really.
with the help from briggsy and scott my old engine came out :agree:
since then i have became a bit of a restoring peado
although the body work is in good condition the bay has never really been touched, as you can see the bay was a big dirtbag, subframe was coverd in oil as was everything else. its a good thing really because its worked well as its protected everything.
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/restore%20o%20clock/DSC03088.jpg
the box was manky aswell
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/restore%20o%20clock/DSC03110.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/restore%20o%20clock/DSC03108.jpg
gunk soon sorted the job out, with a bit of elbow greace as well
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/restore%20o%20clock/DSC03114.jpg
:coffee:
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/restore%20o%20clock/DSC03176.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/restore%20o%20clock/DSC03175.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/restore%20o%20clock/DSC03321.jpg
1 of 9 shades of tungy :wasntme:
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/restore%20o%20clock/DSC03341.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/DSC03350.jpg
powder coat o' clock! new bushes, ball joints and track rod ends.
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/restore%20o%20clock/75653_1704534814530_1272799723_31916833_8020185_n. jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/restore%20o%20clock/37161_1704535254541_1272799723_31916835_7425556_n. jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/restore%20o%20clock/74818_1704533614500_1272799723_31916829_5435583_n. jpg
few new goodies!
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/restore%20o%20clock/DSC03335.jpg
still waiting on parts off over a month ago now from cgb :sad2:
got a few more things getting powder coated, hopefully have more progress soon, thanks for looking
benj
Woznaldo
26-11-2010, 07:32
Love your work Benj. Car is looking sweet and G/box and engine bay have come up a treat!:agree:
Love your work Benj. Car is looking sweet and G/box and engine bay have come up a treat!:agree:
Thanks mate, it's getting there now
Gttnutter
26-11-2010, 10:01
Looking a little more balls out than I thought you were going! Looks wicked Ben, where did you get the black hoses from ?
Gttnutter
26-11-2010, 10:02
Oh that's just reminded me....invoices :sad2: will get onto it
Looking a little more balls out than I thought you were going! Looks wicked Ben, where did you get the black hoses from ?
Cheers mate, yeh I just thought I'd renew and restore things while I had an empty bay.
The hoses are the shanghai ones, had a good look at the bleed nipples and they seem fine, yeh mate get them invoices sent cheers
Big Steve - Raider
26-11-2010, 12:35
Welcome the Inner sanctum of clean engine bay's Benj! :laugh:
quality stuff mate keep at it top work mate :agree:
Welcome the Inner sanctum of clean engine bay's Benj! :laugh:
Cheers steve, iv had a lot of inspiration from cars on here. Iv always wanted to get the bay gleaming so finally getting on with it. :) also decided to make the bay look quite oe looking but with a few subtle mods
quality stuff mate keep at it top work mate :agree:
Cheers Phil
That bay is going to look fantastic, I wish I had balls as big as yours to lift the engine out of mine and do those annoying little bits.
That bay is going to look fantastic, I wish I had balls as big as yours to lift the engine out of mine and do those annoying little bits.
Cheers mate, Iv always wanted to restore the bay and have it gleaming! It would anoy me putting the engine in without cleaning stuff up lol, after having it out there was a few things that were nakerd, engine loom and other stuff didnt look good. I wish I had the balls to lift the engine out i needed the help from Briggs and Scott.
Cheers steve, iv had a lot of inspiration from cars on here. Iv always wanted to get the bay gleaming so finally getting on with it. :) also decided to make the bay look quite oe looking but with a few subtle mods
Yeeeeah boi:D:D Thats looking LOVELY:goodJob:
Is it me, or are there a ****e load of 5's being given this kind of attention now a days??
Seems like these cars are going to be around for many years to come:agree:
Keep up the good work and keep them pics coming mate:agree:
Yeeeeah boi:D:D Thats looking LOVELY:goodJob:
Is it me, or are there a ****e load of 5's being given this kind of attention now a days??
Seems like these cars are going to be around for many years to come:agree:
Keep up the good work and keep them pics coming mate:agree:
cheers mate! yeh i no, iv always been inspired by some of the bays on here, its nice to finally get on the band wagon! :D
ioshi_s_golf
27-11-2010, 01:22
Nice car mate I like it :)
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/DSC03117.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/DSC03115.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/DSC03365.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/DSC03364.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/DSC03356.jpg
TrixNFlix
27-11-2010, 13:35
Top work chap,:agree: makes me really want a tungy as well. :(
Think i'll just wait 2 years and buy this one off you.;):laugh:
Top work chap,:agree: makes me really want a tungy as well. :(
Think i'll just wait 2 years and buy this one off you.;):laugh:
:laugh: lol cheers mate, i feel the same about white 5s
Benn looking good to finish that carb of you need to really get rid of the studs in the top and put some nice M6 stainless steel allen key headed bolts in there.
Loving the effort going into the car, keep up the top work:agree:
Seeing all these projects makes me think I really need to pull my finger out:laugh: I should do a thread for all the changes my 5 has been through and to current
Benn looking good to finish that carb of you need to really get rid of the studs in the top and put some nice M6 stainless steel allen key headed bolts in there.
Loving the effort going into the car, keep up the top work:agree:
Seeing all these projects makes me think I really need to pull my finger out:laugh: I should do a thread for all the changes my 5 has been through and to current
cheers james, iv orderd some new ones but there not stainless, still waiting for loads of stuff the weathers been really bad up here :wasntme:
yeh mate you should, i love looking threw threads whats been changed and restored etc
little update
new clutch thanks adam005, few other parts too
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/restore%20o%20clock/DSC03399.jpg
cheers for the stickers sam
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/restore%20o%20clock/DSC03417.jpg
had the day off work and she was hacky so rolled out for a quick wash. im really happy with the subframe iv got the powder coat bug :wasntme:
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/restore%20o%20clock/DSC03416.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/restore%20o%20clock/DSC03421.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/restore%20o%20clock/DSC03419.jpg
iv got all the parts now, just waiting for a few things to come back from powdercoating (cheers scott) then i can get the engine put in :smokin:
Big Steve - Raider
10-12-2010, 15:56
Looking good mate!! :niceone:
Now's the time to change any of those brakeline's if any of them look suspect?? ;)
phase i 16 v turbo
10-12-2010, 16:00
Looking good!:agree:
Looking good mate!! :niceone:
Now's the time to change any of those brakeline's if any of them look suspect?? ;)
cheers steve, is it a hard job?
Looking good!:agree:
cheers mike
This is looking nice, briggs had better not park his scrapper up next to yours now :D
phil
This is looking nice, briggs had better not park his scrapper up next to yours now :D
phil
Lol cheers phil, briggsys is a clean example.
I always think there's something I can change and replace, I still don't think it's at the standard what some of the 5s on here are.
Big Steve - Raider
10-12-2010, 18:43
cheers steve, is it a hard job?
No not really, especially if you've got a brake pipe spanner/big bloody pair of MOLE grips!! :laugh:
Just take the old suspect/rusty looking ones off & take them to a local garage & ask them to replicate them ;)
No not really, especially if you've got a brake pipe spanner/big bloody pair of MOLE grips!! :laugh:
Just take the old suspect/rusty looking ones off & take them to a local garage & ask them to replicate them ;)
Cheers steve, to be honest they look in decent nick really I think they may have been replaced before
Well it's been a while since there has been any progress. Hired a van last nite so I could bring all the stuff from briggsys to mine, didn't take him long to get the ball rolling. Engines in now, just needs the loom/hoses all putting together so hopefully be all done soon :)
Here's a little pick a took off me phone il upload some off the camera later
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/9eee567f.jpg
Benj
Absolute minter, looking really good.
What type of air filter do you have, I want something similar to what you have, is it a K&N jobbie?
Absolute minter, looking really good.
What type of air filter do you have, I want something similar to what you have, is it a K&N jobbie?
Cheers mate, yours is class
I got it off this website called autospecialists I noticed it in a fastford mag, cost £70 and came next day, well worth it :)
Engine bay is looking very nice, keep up the good work :agree:
Cheers mate, yours is class
I got it off this website called autospecialists I noticed it in a fastford mag, cost £70 and came next day, well worth it :)
Same people I got mine from in the summer great service very helpful company. :agree:
Coming on nicely going to be alot of minty 5s on the road this summer! :niceone:
Cheers mate, yours is class
I got it off this website called autospecialists I noticed it in a fastford mag, cost £70 and came next day, well worth it :)
Thanks mate, I'm aiming to get mine looking more like yours, OE!
I think I'll have to get myself one of those filters too!
few more pics off the camera
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/DSC03595.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/DSC03587.jpg
hopefully have most of it done on sunday :agree:
Very Very nice and tidy.. nice bay :agree:
Looking nice and fresh, all the works paying off:agree::smokin:
At this rate you'll be back on the road before me:wasntme:
Enjoy starting it for the first time, such a wicked feeling:D:D:devil:
Keep the pics coming...........................
Very Very nice and tidy.. nice bay :agree:
Cheers mate
Looking nice and fresh, all the works paying off:agree::smokin:
At this rate you'll be back on the road before me:wasntme:
Enjoy starting it for the first time, such a wicked feeling:D:D:devil:
Keep the pics coming...........................
Cheers mate, yeh it's getting there now. Hopefully get quite a lot of it done tomorrow il keep the pics coming. How's yours doing is there much more to do?
Not a great deal to get it back on the road - just come in from working on it -
Sort out: 2 x Oil leaks - Fiddle with Lights electric - get the bonnet back on and the front bumper:D
Theres still a long list of things that i want to do, but some if not most can wait till winter again......
Good luck tmrw, hope you get things moving:agree:
R5TURBORON
05-03-2011, 20:26
very nice work mate
Cheers lads :agree:
Well last Sunday got a some more work done, oil cooler and rad done, just needs the cooling system setting up with a few other things. Got the t2 back on for running it in, my t25 is probs going to need a rebuild there is a bit of play in it. The engine has had new liner seals fitted (cheers Briggs) so hopefully should run sweet. Iv bought a front mount cooler but not sure what I'm going to do with it yet, il be using my gttuning breadbin for the time being, iv painted it satin black it looks oem. Extended the filter as it's a very tight fit with the cooler there.
Here how it looks at the mo, not long now :)
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/93621ec0.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/1ef1c289.jpg
Just bought some black boost hoses as well
Cheers Benj.
keep them coming :)
AGREED:D
Are the boost hoses the ASI jobbies?
I've been thinking about getting some, but wondering what the quality's like?
It seems that with the other hoses its a lottery, you've either got a good batch or there a load of toss:mad:
keep up the good work:agree:
scott 5gtt
15-03-2011, 20:21
no problemo mate hopefully we will have it running if we get down on thursday :D:agree::D
no problemo mate hopefully we will have it running if we get down on thursday :D:agree::D
Rites mate! Buzzing like, forgot to mention the tricky fitting of the fuel regulator and briggsys gearbox sensor rage lol. Not long now like, il have to get her taxed :agree: :)
keep them coming :)
Will do mate, when its at the garage getting the tracking done il get a few shots underneath of the powder coated sump and subframe :agree:
Looks mint mate :agree:
Cheers Jonny, hows yours coming along mate?
AGREED:D
Are the boost hoses the ASI jobbies?
I've been thinking about getting some, but wondering what the quality's like?
It seems that with the other hoses its a lottery, you've either got a good batch or there a load of toss:mad:
keep up the good work:agree:
Not sure mate it's a uk seller on eBay but i think they are the same ones. My other hoses are spot on like, are yours ok no problems?
Speaking of lottery I was in the car earlier looking to see if I had any euro tickets lying about because there is an unclaimed ticket from county Durham lol, thought my luck was in but it wasn't :wasntme:
Not sure mate it's a uk seller on eBay but i think they are the same ones. My other hoses are spot on like, are yours ok no problems?
Speaking of lottery I was in the car earlier looking to see if I had any euro tickets lying about because there is an unclaimed ticket from county Durham lol, thought my luck was in but it wasn't :wasntme:
:laugh::laugh: if you win billions...........remember my efforts on my 5:laugh: Nut & bolt rebuild you say??:D
My hoses have been spot on, i have fiddled with the bleed nipples - added a better washer to the inside and a drop of silicone....so fingers crossed no probs what so ever:agree:
As said keep them pics coming, and keep up the good work - from those pics the car is looking mint:agree::agree::agree::agree:
:laugh::laugh: if you win billions...........remember my efforts on my 5:laugh: Nut & bolt rebuild you say??:D
My hoses have been spot on, i have fiddled with the bleed nipples - added a better washer to the inside and a drop of silicone....so fingers crossed no probs what so ever:agree:
As said keep them pics coming, and keep up the good work - from those pics the car is looking mint:agree::agree::agree::agree:
Cheers mate!
My intention was to do a nut and bolt job but its too much hassle lol, iv had quite a few of them replaced though
Yeh Briggs is doing the same with my water hoses :agree:
Il keep the pics coming :agree:
Cheers Jonny, hows yours coming along mate?
Not bad at all mate, bout 95% done just tidying up odds an sods an waiting for a few last bits to finish interior off. Dont want to take it to MOT half done.
Not bad at all mate, bout 95% done just tidying up odds an sods an waiting for a few last bits to finish interior off. Dont want to take it to MOT half done.
Nice one mate, yeh best wait till is all done like. This engine bay restoration has bled me dry :cry: lol
Sexual.... Great work mate, looks fantastic.
Fantastic work mate
Well done on building such a great 5, how did you get the carpet so clean :laugh: or have you renewed it
Cheers lads
The carpet was re newd at some point there's a recipt in my history, but I always keep on top of it hoovering and conditioning it :agree:
evening chaps :D
had briggs round yesterday putting all the last pieces back together, started up first time :agree::D was great to hear her running again.
its had a lot of time and money and its finally there, well the engine bay ha, theres still an on going list.
rolled it out tonight with the weather been nice, gave it a wash and a few pics in the light.
heres a pic of the bay when i first got the car, the bay was absolutely coverd in oil and muck, the pic doesnt show how bad it was.
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/8fbe8167.jpg
i wanted to keep the bay looking pretty oe with some subtle mods.
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/DSC03630.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/DSC03627.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/DSC03610.jpg
nice subtle mod with the breather system, used the bracket for the degassing pot to hold the oil catch tank fits in nicely :agree:
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/DSC03617.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/DSC03640.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/DSC03639.jpg
was nice to see it with out a ton of dust lol
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/DSC03632.jpg
just needs a few little things doing now, change the choke bracket clip, raise the header tank a bit, re torque the head, add more coolant and think thats about it. also think il cut down the dumpvalve piece a bit its a bit long lol. going to tax it on friday :D:agree:
massive thanks to briggsy, hes been a big help with this car! also scott hes gave me a lot of help as well, bob and trev too. thanks to mike for helping out with parts and being reliable.
cheers, benj :agree:
absolutley stunning!! great work:agree::agree:
Looking beeeeeeautiful mate ;) you going to run a turbo heatshield? An have you totally done away with the carb water system?
Looks prittttyyy, dont forget your jubilee clips on you carb to intercooler though mate although you probly already know..
Mat
Coming along nicely mate, looks real nice and subtle, looks OE + under the bonnet, keep it up!
Cheers chaps, not sure Jonny I mite put it on and yeh done away with the degassing pot and some of the water pipes. Yeh I no there's no clips mate :agree: Just put them on to see what it's guna look like
Spot on:agree:
Looking foooking sweet:agree: - All the effort coming together
Spot on:agree:
Looking foooking sweet:agree: - All the effort coming together
Cheers mate, i no, should be on the roads next weekend I can't wait!
Excellent work, some of the effort that goes into these cars is awe inspiring.
Renault 5 GT Turbo
29-03-2011, 23:18
Awesomeness!
Spot on mate love it looks absolutely mint again great work
Not sure if this has been mentioned before Ben but in the winter you might find that the lack of water through the carb base can cause the throttle to stick open partially. It usually goes away when fully warm but it's a right pain in the process.
It has to do with the carb base and throttle spindle being made of different metals and warming/heating up at different rates. The spindle gets pinched and sticks.
See how you get on. If it happens, at least you'll know what it is.
mate the engine bay looks fantastic, great job.
I think this will be summer use only after all this money/work Trev :D
I personally love the oem+ look, took some blood/hours/sweat to get it to this condition! not long now until its back on the road:)
Not sure if this has been mentioned before Ben but in the winter you might find that the lack of water through the carb base can cause the throttle to stick open partially. It usually goes away when fully warm but it's a right pain in the process.
It has to do with the carb base and throttle spindle being made of different metals and warming/heating up at different rates. The spindle gets pinched and sticks.
See how you get on. If it happens, at least you'll know what it is.
Cheers for the advice mate, after the summer il be looking into buying another car so hopefully won't have that problem. Just guna keep the 5 for the summer and keep it nice
I think this will be summer use only after all this money/work Trev :D
I personally love the oem+ look, took some blood/hours/sweat to get it to this condition! not long now until its back on the road:)
:agree:Rites mate
dickiegtt
30-03-2011, 21:33
Cheers benj, like someone said, awe inspiring! Absoloutely love it, well done. Im sure you probably are doing this already, but are you putting a nice new brake fluid reservoir in there as well to match that nice new water tank? Sorry. Love it.
Cheers benj, like someone said, awe inspiring! Absoloutely love it, well done. Im sure you probably are doing this already, but are you putting a nice new brake fluid reservoir in there as well to match that nice new water tank? Sorry. Love it.
Cheers mate, yeh I will probably change it i was planning on doing so :agree:
dickiegtt
30-03-2011, 22:48
Phew! I just thought everything else is so mint it would be rude not to! Another obcene project and restoration! Well done mate.
looking amazing Benj, I want your car :laugh: what radiator have you got in there looks like an ebay special which im thinking of buying one, if it is, is it any good.
Thanks Mat
looking amazing Benj, I want your car :laugh: what radiator have you got in there looks like an ebay special which im thinking of buying one, if it is, is it any good.
Thanks Mat
Cheers mate. Yeh it's an eBay spesh, iv asked about and people have said there decent. Iv got a standard replacement one with the oil cooler on, I wanted to run a separate oil cooler but I think the one that's on the rad is ment to be fine
dickiegtt
31-03-2011, 21:19
This thread makes me take a look back at your old phase one trev, i love it soooo much.:cool:
Now then! Got the car finished on Sunday! It's running sweet as! The temp and oil pressure is spot on. Was great driving it again, leaving the t2 on for the mean time but the t25 will be on soon. Massive thanks to Briggs he really knows his stuff with these motors :agree:
Poped it round my mates for a quick portercable touch up
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/e5d51fe3.jpg
Cheers Benj
rs250nut
12-04-2011, 19:26
Now then! Got the car finished on Sunday! It's running sweet as! The temp and oil pressure is spot on. Was great driving it again, leaving the t2 on for the mean time but the t25 will be on soon. Massive thanks to Briggs he really knows his stuff with these motors :agree:
Poped it round my mates for a quick portercable touch up
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/e5d51fe3.jpg
Cheers Benj
Love this car, have a soft spot for tungys and this is a minter:agree:
Thanks, there's still a lot of things I plan to do to make it better :agree:
Can't believe how much shine this car has all the time :)
benj, i know you have mentioned about the indicators and the wings being cut, but is there no way of getting the standard ones in, even a bit of sticker flex to help keep them in, or trying to make a bracket or something.
Just a thought, it would really just finish off you car :).
phil
Alright Phil, I was talking to my mate yesterday about it. But I don't think that would work mate the holes too big and it wouldn't look rite, it's a shame cos I love the standard ones :mad: il eventually do something about it :agree:
Hey mate. Howz the car running?
Thundercat
19-05-2011, 20:54
Those side repeaters would look better changed to renault 19 ones mate. Fitted some to my dimmer and looked spot.
Hey mate. Howz the car running?
Running spot on mate, just need some boost! :D
Those side repeaters would look better changed to renault 19 ones mate. Fitted some to my dimmer and looked spot.
Il probs end up changing the wings mate
In which case, standard would be my choice, or wings with no repeaters :)
old skool turbo power
19-07-2011, 23:13
Now then! Got the car finished on Sunday! It's running sweet as! The temp and oil pressure is spot on. Was great driving it again, leaving the t2 on for the mean time but the t25 will be on soon. Massive thanks to Briggs he really knows his stuff with these motors :agree:
Poped it round my mates for a quick portercable touch up
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/e5d51fe3.jpg
Cheers Benj
nice work going on there mate :agree::)a very clean lookin car.nice garage as well :cool: whos ever it is :laugh:id love something in that size for a garage i only have the street to do my car cleaning:sad2::laugh:
In which case, standard would be my choice, or wings with no repeaters :)
Yep :agree:
nice work going on there mate :agree::)a very clean lookin car.nice garage as well :cool: whos ever it is :laugh:id love something in that size for a garage i only have the street to do my car cleaning:sad2::laugh:
Cheers fella, yeh its a massive garage, alright for some eh lol
Running spot on mate, just need some boost! :D
Know the feeling mate im still running in @ 10psi max, annoying when you know you got a sorted car under you.
Well it's been a while since iv posted in here. Had it off the road all winter forgot how much I loved it when I got it back on the road.
Iv recently bought some Azev c's. Iv been wanting a set since I first bought the car. There in decent condition but il be getting them powder coated.
Pics arnt the best quality, forgot to take my camera to work.
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/5bdb2eba.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/41611550.jpg
http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/934af272.jpg
I'm planning on getting some hispec 4pots next.
Benj :agree:
Looking good mate :agree:
I never get bored of looking at pics of this car. :)
Wheels look great.
Wheels do look nice mate, will you still be able to get the stickers for in the centre caps, it would be a shame if you could not replace :cry:
4 pots next then :smokin:
Looks mint :agree: azev's really suit it
Cheers fellas :agree:
I'm not sure Phil il be looking into it as 2 of the caps arnt in the best nick. If I can't source any il mebys get some stickers made to cover.
Yeh 4 pots, I no there over priced etc but they just look mint :smokin: I'm undecided with red black or silver what you think guys?
Cheers fellas :agree:
I'm not sure Phil il be looking into it as 2 of the caps arnt in the best nick. If I can't source any il mebys get some stickers made to cover.
Yeh 4 pots, I no there over priced etc but they just look mint :smokin: I'm undecided with red black or silver what you think guys?
Mine are red and i love them, but i have red hoses, a red strut brace and obviously the side stickers so it all ties in quite nice. I would go with black calipers on your car though, that will look sweet :)
What are you going for hi-spec, or just going to see what pops up?
Get them Clio/19 side repeaters on! :)
Mine are red and i love them, but i have red hoses, a red strut brace and obviously the side stickers so it all ties in quite nice. I would go with black calipers on your car though, that will look sweet :)
What are you going for hi-spec, or just going to see what pops up?
Yeh blacks probs my first choice mate. guna get hi spec yeh, not sure what to get crossed groved or drilled disks. Still got a massive list what I want to do to this car but it's all money :scared:
Yeh blacks probs my first choice mate. guna get hi spec yeh, not sure what to get crossed groved or drilled disks. Still got a massive list what I want to do to this car but it's all money :scared:
Groved all the way :)
Matt Cole
27-04-2012, 13:22
Smashing car that mate.
The north seems to have the best of everything, best van, best OE and the most powerfull!!:D
Must be something in the water.:agree:
Dave Reed
27-04-2012, 17:14
Smashing car that mate.
The north seems to have the best of everything, best van, best OE and the most powerfull!!:D
Must be something in the water.:agree:
That's because they don't have TV's yet :wasntme::wasntme:
Cracking looking car ben
Smashing car that mate.
The north seems to have the best of everything, best van, best OE and the most powerfull!!:D
Must be something in the water.:agree:
:agree: we just need to get some meets sorted to show off the countrys finest :D
She's a Stunner!!:hump::hump::hump::hump: :agree::agree::D
Junglist
29-04-2012, 07:25
I like the wheels m8 nice car also, in a bit of a mess myself choosing new wheels :scratch:.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.