PDA

View Full Version : reving problem



c6mby
08-03-2010, 11:53
hi

hope someone can help

my car seems to pop and hesistate when reving has anyone any ideas why?

do you think it just needs setting up?

regards
sam

Brigsy
08-03-2010, 11:54
Carb probably needs attention mate. What happens at what rpm's? need more info to diagnose.

Check the basic ignition components too if they havent been replaced.

c6mby
08-03-2010, 12:26
Hi thanks for the reply , it's had new plugs leads dizzy cap, runs fine but as soon as you try and rev from idle it Miss fires and pops then revs

Chris Hebden
08-03-2010, 12:34
Check in the dark to see if you can see any earthing from the HT leads (may see a blue spark from HT leads onto the tappet cover), make sure HT leads are secure and there is no moisture in the dizzy cap.

c6mby
08-03-2010, 12:46
Thanks I will give that a try tonight

HULK
08-03-2010, 13:23
Also check the wire to the timing sensor isn't melted

Tony Walker
08-03-2010, 20:33
if it pops and splutters then revs sounds like its your accelerator pump on the carb. check its adjusted properly and moving freely. popping spluttering suggests its lean as you press the throttle.

c6mby
09-03-2010, 00:32
thanks how do i go about checking this please?
regards
sam