Log in

View Full Version : mocal madness


jesus in the seat of a 5
31-01-2010, 09:13
Right , i went to fit an external oil cooler last week to the cup, everythings is on except when i went to fit the bolt into the block that the sandwich plate fits on it was 1m to big when measured on calipers, i tried all combinations as i had the original bolt{reno} and the mini extention bolt...but to no avail, i then thought o.k. ill see what devolps, i then kindly obtained another male to male bolt from luke and guess what , thats too big too?...:scratch:, i also contacted think automotive and asked them, they then sent me another male to male bolt , of which still doesnt fit..im begining to think it should be a M19 not a M20 which is what i have and still doesnt fit...:mad:, i have fitted one on nicole and im sure i justed used a male -female brass bolt that went into the block , the sanwich plate went on and the oil filter went on after.....grrrr , how blimmin hard can it be?, i even started thinking maybe the block had been tap and dyed but i have tried the bolts on two other blocks, please can anyone unscramble my head...cheers , matty..:)
Os8472
31-01-2010, 09:23
Right , i went to fit an external oil cooler last week to the cup, everythings is on except when i went to fit the bolt into the block that the sandwich plate fits on it was 1m to big when measured on calipers, i tried all combinations as i had the original bolt{reno} and the mini extention bolt...but to no avail, i then thought o.k. ill see what devolps, i then kindly obtained another male to male bolt from luke and guess what , thats too big too?...:scratch:, i also contacted think automotive and asked them, they then sent me another male to male bolt , of which still doesnt fit..im begining to think it should be a M19 not a M20 which is what i have and still doesnt fit...:mad:, i have fitted one on nicole and im sure i justed used a male -female brass bolt that went into the block , the sanwich plate went on and the oil filter went on after.....grrrr , how blimmin hard can it be?, i even started thinking maybe the block had been tap and dyed but i have tried the bolts on two other blocks, please can anyone unscramble my head...cheers , matty..:)


Hey Jesus why not just ask yoiur dad lol

Are you using the standard sandwhich plate or a Mocal job?
jesus in the seat of a 5
31-01-2010, 09:25
Hey Jesus why not just ask yoiur dad lol

Are you using the standard sandwhich plate or a Mocal job?

I tried that he getting pissed off now, busy time of year...:laugh:, Cheers Ol`,im using the mocal jobbie with thermostat.
Os8472
31-01-2010, 09:27
I tried that he getting pissed off now, busy time of year...:laugh:, Cheers Ol`,im using the mocal jobbie with thermostat.

The one with the stat in the side of the plate?
jesus in the seat of a 5
31-01-2010, 09:29
The one with the stat in the side of the plate?

indeed sir ...indeed, this have any relavence or are you just wondering.....:laugh:..;)
Os8472
31-01-2010, 09:31
It does, I had one, my advice, file it in the bin and use a factory one with an inline stat, abit more work but it'd be better in the long run.


Oh and the hole in the centre of the mocal plate is bigger than the hole in the factory plate
jesus in the seat of a 5
31-01-2010, 09:33
It does, I had one, my advice, file it in the bin and use a factory one with an inline stat, abit more work but it'd be better in the long run.


Oh and the hole in the centre of the mocal plate is bigger than the hole in the factory plate

This much i know buddy but this doesnt help my quest, what size is the bolt , the oe one in diameter that goes into the block?, also what size mocal bolt..in terms of M..err whatever fits in it?...:)
Os8472
31-01-2010, 09:35
This much i know buddy but this doesnt help my quest, what size is the bolt , the oe one in diameter that goes into the block?, also what size mocal bolt..in terms of M..err whatever fits in it?...:)


Not a clue mate but just sayin if you've got the standard plate still your better off making that work than mocal's piece of ****e that you have cut the engine mount to make fit and has a rep for the stat sticking closed
jesus in the seat of a 5
31-01-2010, 09:39
Not a clue mate but just sayin if you've got the standard plate still your better off making that work than mocal's piece of ****e that you have cut the engine mount to make fit and has a rep for the stat sticking closed

Fair enough buddy , appreciate Ol` that your the only person to reply thus far , all that work is done etc , i just need the correct bolt buddy...one that fits....:scratch:
Os8472
31-01-2010, 09:52
Well I do have my old one, its sat in the bottom of the bin in my garage, fortunatly I touched the 5 for the first time this year yesturday so I haven't emptied it yet.
Os8472
31-01-2010, 10:01
And as if by magic
http://www.rtoc.org/boards/picture.php?albumid=75&pictureid=10188
jesus in the seat of a 5
31-01-2010, 10:23
Cheers ol`, what diameter is the bolt / s?...mine is 18cm across, sorry i only have a ruler to hand...:ashamed:
jesus in the seat of a 5
31-01-2010, 11:11
Ps , Ol` if your a 100% sure your bolt fits ,your not going to use it etc , why not sell to ole jesus....;).....:D
Os8472
31-01-2010, 14:03
Well these are the sizes, hope they help and I could be persuaded to sell em

http://www.rtoc.org/boards/picture.php?albumid=75&pictureid=10197
http://www.rtoc.org/boards/picture.php?albumid=75&pictureid=10196
http://www.rtoc.org/boards/picture.php?albumid=75&pictureid=10195
http://www.rtoc.org/boards/picture.php?albumid=75&pictureid=10194
jesus in the seat of a 5
31-01-2010, 17:20
Cheers ol, ill pm you my address buddy and we will go from there...:D
Sparkie
31-01-2010, 18:21
there are two different sizes of holes in the block. definately between an r5 and a r11 block, maybe the ph1 to ph2 block too.
jesus in the seat of a 5
31-01-2010, 19:03
there are two different sizes of holes in the block. definately between an r5 and a r11 block, maybe the ph1 to ph2 block too.

cheers buddy , im calling thinkautomotive again tommorow, i will get to the bottom of this....:)
Os8472
31-01-2010, 23:52
there are two different sizes of holes in the block. definately between an r5 and a r11 block, maybe the ph1 to ph2 block too. I've used that bolt on 2 different blocks, 1 was a ph1 the other a ph2 and it fitted perfectly
jesus in the seat of a 5
01-02-2010, 05:57
I've used that bolt on 2 different blocks, 1 was a ph1 the other a ph2 and it fitted perfectly

come on then Ol, im desperate....:D
BlueFish5Gt
01-02-2010, 10:07
I had the same problem and I had a custom one machined.