Fuel Hose: Fpr To Carb

[raj]

as title suggests,

can someone tell me the diametre of the fpr to carb fuel delivery hose?
ive just noticed that the one i have one is leaking slowly:eek: pretty lucky i noticed this while that car is still off the road!
the one i fitted before dropping my new build back in is a braided fuel hose, im wanting to got back to the std OE fuel hose as its shaped to fit.

so can someone give me the part number for this hose and also tell me the diametre of it ?
does anyone happen to have one?

[rs250nut]

I have just taken one apart, im sure its 6mm in and 4mm out

[raj]

I have just taken one apart, im sure its 6mm in and 4mm out

you,ve lost me:scratch: what do you mean by 6mm in 4mm out?

[rs250nut]

you,ve lost me:scratch: what do you mean by 6mm in 4mm out?

Sorry it has two diffrent sizes of hose, one side is bigger than the other.:)

[car.crash]

I just used 8mm pipe into my fpr from the lines under the car.

[raj]

Sorry it has two diffrent sizes of hose, one side is bigger than the other.:)

ahh, so which end is bigger? the fpr end or the carb end?

if its the carb end i suppose i could simply get a brass reducer and fix it to the hose just before the carb and fit a smaller diameter hose to it.

but i need to be sure on what diameter the carb end hose is??

[rs250nut]

ahh, so which end is bigger? the fpr end or the carb end?

if its the carb end i suppose i could simply get a brass reducer and fix it to the hose just before the carb and fit a smaller diameter hose to it.

but i need to be sure on what diameter the carb end hose is??


The hose that comes out of the fpr going to the carb is smaller, mike 16v has the genuine part if you need it probabley new and second hand.

[rs250nut]

Just been out to the garage to measure it 6mm and 8mm out

[raj]

Just been out to the garage to measure it 6mm and 8mm out
thanks for that:agree: ive pm'd mike to see if he has any:)