Allan_100
20-12-2009, 15:53
Im replacing the front crossmember, headlight panels, slam panel and nearside inner wing. This is due to a sub-standard repair and now the tinworm has flourished on the damaged panels. I need measurements from where the inner wing meets the crossmember to the chassis rail on each side and also the distance between the 2 chassis rails where they meet the crossmember
If anyone has a 5 with the front bumper off I would be very grateful if they could double check these measurements for me.
chassis rail to chassis rail measurement: 870mm
inner wing to chassis rail O/S: 180mm
inner wing to chassis rail N/R: 195mm
If anyone has a 5 with the front bumper off I would be very grateful if they could double check these measurements for me.
chassis rail to chassis rail measurement: 870mm
inner wing to chassis rail O/S: 180mm
inner wing to chassis rail N/R: 195mm