advice on changing acelerator cable

[blue mackay]

as above any advice on how to do?
has anyone got any tips,for ease of fitting to cut the hrs down tommorow please :p
cheers

[michael tierney]

use the origional steel outer cable,feed new one through and make sure u crimp the ferule good,u can add a bit of epoxy glue to the end of the cable to make sure!!:)

[blue mackay]

use the origional steel outer cable,feed new one through and make sure u crimp the ferule good,u can add a bit of epoxy glue to the end of the cable to make sure!!:)

excellent,thank you for this just waiting for daylight now to get started!!!!
cheers fella

[Alex]

To make life easy, whip the drivers side wheel off and remove the small plastic cover in the wheel arch. You can then see where the cable routes into the footwell.....:)