What Renault Parts would you want??

[Penfold aka The Dealer]

Right over the last few weeks, i have been in contact with many people at renault, i now finally have a contact who is willing to help me & has found where source bits from...

I am going to call him tomorrow to discuss options...

Now I am going to ask for front bumper strips, Gearknob's, suspension top mount's...

I would need to talk to my contact to discuss number's need &rough cost etc...

Now i would like to know what parts people are after... but remember the cost's involved & availibilty of parts... there is no point in my asking for discount on parts already in production (although i will try),I am mainly trying to get "hard to get hold off/nolonger available parts).

[Mart]

http://www.rtoc.org/boards/showthread.php?t=11229

[clee]

Take it this is 5 gtt only ......................:coffee:

[phase i 16 v turbo]

Good luck Chris, you will find I have called most of the numbers your chap will have. Both in the UK and Europe, but always worth trying as it will help keep our cars on the road.

[Penfold aka The Dealer]

Take it this is 5 gtt only ......................:coffee:

Most popular car in this club... although if i find out min order is x10 for certian bits i dont see why it has to be...

I want to call my contact & email a list with part numbers and see what he can come back with..

I am not promising anything but i am doing my best and i will be on the phone tomorrow to Renault UK & Renault France in a conference call set up by Renault uk...

I am using my time of work wisely. :)

[phase i 16 v turbo]

Ok here we go
Phase I front grille
Phase I front fogs
Solex DIS 32
Carb heat shield
Carb linkage
Phase II front towing eye
Strut top covers
Fuel pump relays
Rear shelf supports
Black carpet
Phase I & II Front seats
Phase II centre console in correct colour
Gutter rail trims
Perc fan sesor holder
Front door card window winder blanking plates.

If you have luck with these I have another list.

Many thanks for all your help.

[Penfold aka The Dealer]

Ok here we go
Phase I front grille
Phase I front fogs
Solex DIS 32
Carb heat shield
Carb linkage
Phase II front towing eye
Strut top covers
Fuel pump relays
Rear shelf supports
Black carpet
Phase I & II Front seats
Phase II centre console in correct colour
Gutter rail trims
Perc fan sesor holder
Front door card window winder blanking plates.

If you have luck with these I have another list.

Many thanks for all your help.

If you have any of the orginal part numbers would be handy... :) feel free to pm me or email scsdrivingschool@aol.com

[Penfold aka The Dealer]

Update,

Spoke to Renault Uk/France via conference call..

They were very happy with what i asked, they said some things were impossible to get remade as they were often made by other comany's and renault just brought the right's to use said product's...

But most plastic's, tubing, hose's could easily be remade... Carpet and seat material are different story but the french guy will look into it...

They did mention that most bodywork is still manufactured and easily available (bar a shell)

This is all for the ph2, ph1's are slightly different and due to numbers left of them renault dont seem overly keen on remaking parts... but they will look into it..

I will get another call next week and full email in detail of what can be done, cost, minimun numbers etc etc.

[Markey Mark (BD)]

When they said bodywork mate was it just bodypanels i:e wings, sills, quaterpanels, floor sections, etc or does it include plastic body panels too like the kit, trims and all other piece's?

[Hoolio]

Top darts, sounds like you're really getting somewhere, also sounds expensive.

[Penfold aka The Dealer]

When they said bodywork mate was it just bodypanels i:e wings, sills, quaterpanels, floor sections, etc or does it include plastic body panels too like the kit, trims and all other piece's?

Sorry they meant body panels... they only said "most" so i am sure there are the odd panel they dont do... but they can do if there is enough demand..

Plastic body parts would be easy to do but would require a minimum order..

[Markey Mark (BD)]

Thats cool mate, if they can do then be good to see what panels they can do as it'll be nice to replace rotten panels with genuine ones rather than patching up all the time

[Spooky]

Thank fook I havnt sold my oe front wings, Ive seen them going for very silly money LOL

[Bigfoot]

Thank fook I havnt sold my oe front wings, Ive seen them going for very silly money LOL

They not available at renault any more, saw one on eBay for like 90 quid buy now. They were only around 40 quid a little while ago.

[Penfold aka The Dealer]

Bloody hell, that much for front wing's?? I though they were still available... the only problem is i think renault will want a minimum order of 50 for many parts... cant see 50 people wanting a set of wings? Where as Gearknobs, front bumper rubbers, headlights, etc there maybe enough interest...

[Spooky]

I don't think I paid more than £20 a side when I brought mine, in fact, I know I didn't :D

[Spooky]

Chris, have you asked about the jacking points on the 5 ?

I need to do mine and if you can get them for a reasonable price, put me down for all 4 points please :)

[Penfold aka The Dealer]

Chris, have you asked about the jacking points on the 5 ?

I need to do mine and if you can get them for a reasonable price, put me down for all 4 points please :)


Think you can still get them..

[phase i 16 v turbo]

I have OE wings and jacking points in stock.

[Spooky]

Mike, could you PM me a price on all 4 points please ? :)

[gtmatt]

Mike, could you PM me a price on all 4 points please ? :)

i got some front jacking points not so long ago £37 a side:) may be more now:)

[gtmatt]

what about these side decals , from 3m ???:)

[markey b]

They not available at renault any more, saw one on eBay for like 90 quid buy now. They were only around 40 quid a little while ago.

my bro just purchased a pair from our local dealer?!

[J$£5GTT]

I have OE wings and jacking points in stock.


for your gtt spares !!

:agree:

[Penfold aka The Dealer]

what about these side decals , from 3m ???:)


Side decals are still available... Also 3m cant sell them to us as the design is owned by renault...

[Scottish9Turbo]

i know the 5 is the most popular but how about showing some of the rarer cars on here some love too please!

if something can be sorted im sure most of us 9 turbo owners could do with some more panels if theres anything lying about in a warehouse somewhere!!! i have cash waiting for ANY panels lying about, doors, boot, bonnets, the lot. suspension struts, rear beams, u name it mate.

dont have a thing against 5's but it isnt all just about the small rockets here, us large lads here with rustier bodies need some love too!:coffee:

[HAndy]

New poster! (less than 10 posts)

complete grp phase 2 body kit including bumpers with (strips moulded in)
phase 1 grill/ phase 2 grill
n/s and o/s door skins or complete unit (£250+vat)each from renault!!!
grp bootlid
grp bonnet
sills
grp front wings
these are the items that most people will need to keep the cars mot'd and on the road for the next ten or so years,just like the lads in mini clubs
not "coupe" badges /gear sticks/knobs:sad2: if we want to keep these lovely cars going:agree:
unless you want to really pay££££ for parts ie "fastcarspares" with the grp turbo 2 items:scared: there is only so long ebay will have secondhand parts available, before the number of r5gtt being broken is no more:crap: i would suggest now is the time to group buy /employ a company to mould these items,the smaller items can wait,

[Scottish9Turbo]

i know a fibreglass specialist up here and can probably get fibreglass front grills made up for people if they were interested in them?

he does this day in and day out for a living and his workmanship is superb.

if people wanted to do these for 5 grill's im sure i could speak to him and work something out if there wasnt any other way to make grills up?

[HAndy]

New poster! (less than 10 posts)

i would be more than happy to donate my mint phase 1 grill to the cause if it meant the production of theses parts could continue without the stupid /greedy price tags being placed on such items :dearme: ,if all other members did the same for various items it would cost the club a lot less to make reproduction items ,you would already have the plugs;)

[Scottish9Turbo]

well all he would want is the cost to cover making them and his time for it mate. i think he made one up here for scotlands most hated man (mike:laugh:) and it was something like £40 he paid for it to see what the condition was like, its going to be painted and on one of his own cars and the quality is very good. its not painted so got a good look and the materials used for it are top notch the mould was a brand new grill that was used to create it as well.

if everyone chipped in (highly unlikely though) then we'd have a lot more 5's probably on the road looking in better condition or at least ON the roads not sitting off them 3/4 of the year showing those new shaped bubble crappers how a real car looks and goes!:agree::devil:

[HAndy]

New poster! (less than 10 posts)

of course it would only be right that the club shop held the moulds/production parts,no dis-respect to anybody in general ,but people do come and go in the club scene, and i would be pissed if parts had to be remade due to "lost items":rolleyes:

[HAndy]

New poster! (less than 10 posts)

i hear,and agree totally with what your saying. it would in the long run pay for itself,and give every member cheaper motoring costs , plus the fact that grp wouldnt rust ,less weight,easy to repair if crashed damaged on track etc:cool:then with the pennies saved move onto the more smaller detailed items like the badges,stickers etc ,:D

[Sparkie]

fastcarspares is actually quite cheap for turbo 2 body kit pieces....:p

[djinuk]

I agree we should find a fibreglass guy , and get him on board, get him to create some molds for r5 wings/bonnet/grills/boot lids.

From them same molds he could even produce carbon fibre items.

It would be really nice to see lots of decent r5 panels, i would be interested in a pair of wings so long as they fitted well.

[JRP]

A slight idea, and dont shoot me down.

A slight raise in the subscription charge the next time people are due to pay.
Just one time only, and the extra the club has gained, it could use to get a company on board and get mouldings sorted etc... this way it would be a small amount payed by all, but at least the ball would be rolling, and the initial lump sum would be sorted.

Just a thought but as its one off and does not have to be a great amount it maybe worth thinking about.

[djinuk]

i persoanlly think the club should lower initial fee and increase renewal as a lot of people i speak to wont pay the initial charge but i know once onboard they would happily renew it. Could the club not sell some of them towing eye covers etc on ebay for some profit and a few other items, cgb dosent have access to them and they seem to may good cash on the original items.

[phase i 16 v turbo]

I have a chap who made all my fibreglass panels for my 105e, you can't fault his work, but once the panels are painted etc, they aren't as good as the real ones, they serve their purpose and are alot lighter, but they flex very easily, doors pop open under hard corner, seals no longer seal correctly etc. Making them is not a problem. Just the living with them afterwards needs some consideration.

[JRP]

i persoanlly think the club should lower initial fee and increase renewal as a lot of people i speak to wont pay the initial charge but i know once onboard they would happily renew it. Could the club not sell some of them towing eye covers etc on ebay for some profit and a few other items, cgb dosent have access to them and they seem to may good cash on the original items.

Missing the point, point is i dont mind paying a few extra quid if i know im geting more. If its even an opt in or out basis... this could create more money for the club to look down said routes. In gaining the oney people dont have to do anything, the pot would just gradualy build up. It saves hassles of club members selling on the bay of **** etc. Im just thinking of ways money could be raised for pannels etc that are not so readily available. All it requires is small donations to get it rolling.

[phase i 16 v turbo]

i persoanlly think the club should lower initial fee and increase renewal as a lot of people i speak to wont pay the initial charge but i know once onboard they would happily renew it. Could the club not sell some of them towing eye covers etc on ebay for some profit and a few other items, cgb dosent have access to them and they seem to may good cash on the original items.

CGB sold one of the club's towing eye covers last week.

[Kenobi]

Windscreen surround.

[djinuk]

CGB sold one of the club's towing eye covers last week.

ah hmm, lol

yea sorry jrp it was just general point, wasnt so much of a follow on from what you said.

[gtmatt]

Can not contact renault in some way , and buy some stock from them , because soon there will be nothing on the shelfs , and see what they have left , cause it looks like to me they have had a price increase on the rare items for the five , some of the smally stuff is still cheap .

i am sure if we club together somehow, i know they have to leave some stock on the shelf for other 5 owners but sell some to us

[tiff_lee]

I agree we should find a fibreglass guy , and get him on board, get him to create some molds for r5 wings/bonnet/grills/boot lids.

From them same molds he could even produce carbon fibre items.

It would be really nice to see lots of decent r5 panels, i would be interested in a pair of wings so long as they fitted well.
Was this looked into before? or was that carbon bonnets? It would be interesting to know how many fibreglass panels need to be sold in order to make it worthwhile to producing them.

[Penfold aka The Dealer]

The problem for the club to buy any parts is, how many, what parts and then storage of said parts... IF it were 50 Gearknob's purchased for £20 each then maybe the club could look into it... but if it was 50 front bumpers then your looking at £5,000 & storage of that many bumpers would be an issue...

From what i have heard from renault is they will want a run of 50 minimum for "out of production" parts!! But we would get them said products for a tad bit over cost price (remember Renault already have the mould etc) so its just a case of using the mould's etc rather than design of mould's...

Tbh the main things we can realistically get are plastics, rubber & hose's... anything more will cost £££'s and i doubt there will be much demand..

Also remember that alot of parts arent actually built by renault, so some bits just arent available full stop!

I have passed a list of the following to renault

Renault 5 GT Turbo Boot badges ( 77 00 766 774)
Original front Grill Renault badge (77 00 784 141)
Front Bumper Rubbers (left 77 00 779 711 Right 77 01 779 712)
Gearknobs (77 00 788 749)
Red & Black Carpet
Original GT Turbo mat's
Towing Eye Covers
Strut top covers
Front Grill (Ph1 & 2) (PH2 77 01 367 888)
Suspension Top Mounts

I used the original parts numbers that i had for most of them..

[phase i 16 v turbo]

A run of 50 minimum for "out of production". This is good news, as the number when I have asked has been much higher. Will be interesting to see what they say next.

[Hoolio]

What do the original Gtt mats actually look like? Sorry:offtopic:a little.

[Penfold aka The Dealer]

What do the original Gtt mats actually look like? Sorry:offtopic:a little.


I dont know, i just asked if they were different and if they could be re-made...

[r5 rich]

I would say brand new cylinder heads but I already have an untouched one sitting in my parts:cooter:

I would be interested in a gearknob as mine is annoying me:)

[Penfold aka The Dealer]

I would say brand new cylinder heads but I already have an untouched one sitting in my parts:cooter:

I would be interested in a gearknob as mine is annoying me:)

Would 50 people be interested in a new head... & remember they wont be cheap.

[jesus in the seat of a 5]

Would 50 people be interested in a new head... & remember they wont be cheap.

i have one in the box....id be intersted in a lot of the other items though...:D

[rs250nut]

I would say brand new cylinder heads but I already have an untouched one sitting in my parts:cooter:

I would be interested in a gearknob as mine is annoying me:)


Ive got an o.e ten inch cock but im not gloating about it, serious this should not turn into ive got 7 phase 1 grills, 27 pairs of raiders badges etc

[phase i 16 v turbo]

Would 50 people be interested in a new head... & remember they wont be cheap.

I can still source them

[wrightygtt]

Ive got an o.e ten inch cock but im not gloating about it, serious this should not turn into ive got 7 phase 1 grills, 27 pairs of raiders badges etc


lol:laugh: and i bet if your married its still in its original packing, unused:laugh:

[J$£5GTT]

are new tailgate spoilers available with new speed washers?
:)

[Hoolio]

What do the original Gtt mats actually look like? Sorry:offtopic:a little.

Are they the ones with little squares in negative and the Renault diamond over the heel area? Or are those just a generic renault mat.

As to the 50 quantity I suppose an obvious guide would be the Orange dials GB but even then you would have to filter different products in over a period so as not to overwhelm people.

[5alldaway]

original hoses, water hoses and boost hoses

[JRP]

original hoses, water hoses and boost hoses


You can still buy them from renault...

[Penfold aka The Dealer]

on a seperate note, what is the part number for the hot air feed of a standard airbox?

[Penfold aka The Dealer]

http://cgi.ebay.co.uk/RENAULT-5-GT-TURBO-FRONT-BUMPER-STRIPS-NEW-PAIR_W0QQitemZ390131718937QQcmdZViewItemQQptZUK_Ca rsParts_Vehicles_CarParts_SM?hash=item5ad5a99b19

:( hopefully Renault France can come up with the goods...

[Sparkie]

http://cgi.ebay.co.uk/RENAULT-5-GT-TURBO-FRONT-BUMPER-STRIPS-NEW-PAIR_W0QQitemZ390131718937QQcmdZViewItemQQptZUK_Ca rsParts_Vehicles_CarParts_SM?hash=item5ad5a99b19

:( hopefully Renault France can come up with the goods...



not being funny here, but don't you think Bob would have tried that avenue?

[car.crash]

http://cgi.ebay.co.uk/RENAULT-5-GT-TURBO-FRONT-BUMPER-STRIPS-NEW-PAIR_W0QQitemZ390131718937QQcmdZViewItemQQptZUK_Ca rsParts_Vehicles_CarParts_SM?hash=item5ad5a99b19

:( hopefully Renault France can come up with the goods...

thats a piss take. i would rather smear dog poo in my front bumper with my tongue than pay that for 2 rubber strips.

[Markey Mark (BD)]

thats a piss take. i would rather smear dog poo in my front bumper with my tongue than pay that for 2 rubber strips.

Does anyone know how much they were from Renault originally?

That seems abit steep for what they are

[rs250nut]

thats a piss take. i would rather smear dog poo in my front bumper with my tongue than pay that for 2 rubber strips.


I would rather stick a fork in my eye

[Hoolio]

Does anyone know how much they were from Renault originally?

That seems abit steep for what they are

£16.30+vat each.

[MR TURBO]

I would rather stick a fork in my eye

Ever heard the saying eat shi* and die?? I think its fits here!!!

[Markey Mark (BD)]

£16.30+vat each.

:laugh::laugh: So abit of a rip off price then!

[Hoolio]

Simple case of supply and demand I suppose.

[rs250nut]

Ever heard the saying eat shi* and die?? I think its fits here!!!

:laugh::laugh: my shell is now up for 10 large

[phase i 16 v turbo]

Renault France have none and haven't for a while.

[rs250nut]

Renault France have none and haven't for a while.

Its a part that was probabley changed quite a lot in the early days, I bet loads of people scraped their bumpers with body shops replacing the part without thinking of repairing it.

[Penfold aka The Dealer]

not being funny here, but don't you think Bob would have tried that avenue?

Dont get me wrong i know Mike & Bob have both tried to get parts but i am trying to play the "club" card rather than X person trying to make money... who know's, cant hurt to try.

[Mart]

Simple case of supply and demand I suppose.

Only if people are dumb enough to pay those prices. If everyone boycotted CGB, and thus his business then started drying up, he'd soon lower the prices to a more realistic level.

The days of rtoc'ers being ripped off, a la GT Tuning et all tuners, have long since past...or so I'd like to think :rolleyes:

[JRP]

Only if people are dumb enough to pay those prices. If everyone boycotted CGB, and thus his business then started drying up, he'd soon lower the prices to a more realistic level.

The days of rtoc'ers being ripped off, a la GT Tuning et all tuners, have long since past...or so I'd like to think :rolleyes:

you'd like to think .... you dont have permission:sad2:

[Hoolio]

Only if people are dumb enough to pay those prices. If everyone boycotted CGB, and thus his business then started drying up, he'd soon lower the prices to a more realistic level.

The days of rtoc'ers being ripped off, a la GT Tuning et all tuners, have long since past...or so I'd like to think :rolleyes:

Would be good but that's not the way supply and demand works. Prices will only come down if there or more people out there selling more high quality parts, remember Mike has just bought a bunch of these for a similar price. I think we're just going to have to buckle up for a bumpy ride.

[phase i 16 v turbo]

Would be good but that's not the way supply and demand works. Prices will only come down if there or more people out there selling more high quality parts, remember Mike has just bought a bunch of these for a similar price. I think we're just going to have to buckle up for a bumpy ride.

This is true, I bought 4 sets. I had a call from a contact overseas offering me 4 sets and took the plunge. I may have made a mistake, but there were none left in the UK for sale.

[Shane P]

Only if people are dumb enough to pay those prices. If everyone boycotted CGB, and thus his business then started drying up, he'd soon lower the prices to a more realistic level.

The days of rtoc'ers being ripped off, a la GT Tuning et all tuners, have long since past...or so I'd like to think :rolleyes:

It seems they have, i don't see how CGB is ripping anyone off.

[5alldaway]

i like what cgb is doing, with every 5 they break the more chance the remaining ones go up in value :)

[Hoolio]

Mike, if I'm right then you've not made a mistake and it seems Bob thonks he can get those kind of prices for more than one set.

[JRP]

Mike, if I'm right then you've not made a mistake and it seems Bob thonks he can get those kind of prices for more than one set.

Mikes no fool, he knows what he is sitting on, mistake my hairy bottom. saying that iam as well :) sitting on gold love it

[Guybrush]

Dont get me wrong i know Mike & Bob have both tried to get parts but i am trying to play the "club" card rather than X person trying to make money... who know's, cant hurt to try.

Did this go anywhere in the end? :(

[Penfold aka The Dealer]

Sadly not....

[TopCat]

Replicate and fabricate :)

[robx1r]

Ok here we go
Phase I front grilleand phase two
Phase I front fogs
Solex DIS 32
Carb heat shield
Carb linkage
Phase II front towing eye
Strut top covers
Fuel pump relays
Rear shelf supports
Black carpet
Phase I & II Front seats
Phase II centre console in correct colour
Gutter rail trims
Perc fan sesor holder
Front door card window winder blanking plates.

If you have luck with these I have another list.

Many thanks for all your help.

driver inner window seal, seals/guides inside the window