windscreen washer fuse.....

[Spidey]

New poster! (less than 10 posts)

New poster! (less than 10 posts)

My front windscreen washer has just stopped working, if I pull the stalk it does the usual 4-5 wiper turns just no screenwash or sound from the motor. the rear washer spins up ok.

I've looked in the 5 manual, haynes and I just cant find out which fuse it is for the front washers.

Or could it just be a knackered pump? any clues please peeps.

[tonesGTT]

right fella, according my 5 handbook, there are two fuses for the wipers, front and rear. Number 11 which should be a 7.5amp and number 13 which should be a 15amp. 11 is listed as windscreen wiper 'park' and number 13 as just windscreen wiper.

Hope this helps. My money is on 13 being the front wipers ;)

[RichR]

If the wipers work, but the washers don't then it's not a fuse - both are off the same supply. More than likely a dodgy connection or pump motor.

Try swapping the plugs round for the front and rear washer pump motors - if the front washer works when you press the rear washer switch, then you know it's not the pump, it's the wiring...

[Spidey]

cheers, I'll try your suggestions when i stops pis*ing it down! British weather ey?! :crap: