Actuators

[SP33DY]

I'm looking for a new actuator.

The problem is that the space it sits in is quite tight so it needs to be no more than 58mm in diameter and have a straight rod of 125mm long. Looking for about 12psi.

Currently using a t2 actuator and it doesn't hold boost properly.

Anyone have any sugestions on what to use?

Steve

[Shane P]

If all you want is 12 psi, then i'd get another standard T2. The spare one i have will hold just over a Bar no problem so you should be able to find the same, cheap. :smokin:

[Ashy]

Anyone have any sugestions on what to use?



External Wastegate? :cooter:

[SP33DY]

If all you want is 12 psi, then i'd get another standard T2. The spare one i have will hold just over a Bar no problem so you should be able to find the same, cheap. :smokin:

Does it hold that all the way to the red line?

As basically mines peaking at 22psi then dropping back off to 12psi, admittedly it is only a 7psi actuator coupled to a boost controller.


Ashy I'm to tight for that.