View Full Version : H.I.D in morettes
im going to be fitting a pair of morette twin headlights soon and was hoping someone could give me instructions on fitting them? or is it simply a case of removing the oe headlamp then fitting the morettes and pluging the wiring harness in situ.?
Also i plan to fit a H.I.D conversion kit.! does this seen ok ->
http://cgi.ebay.co.uk/Hid-Xenon-Conversion-Kit-H4-HI-LO-BI-XENON-6000K-55-W_W0QQitemZ160287884974QQihZ006QQcategoryZ72235QQs sPageNameZWDVWQQrdZ1QQcmdZViewItem (http://cgi.ebay.co.uk/Hid-Xenon-Conversion-Kit-H4-HI-LO-BI-XENON-6000K-55-W_W0QQitemZ160287884974QQihZ006QQcategoryZ72235QQs sPageNameZWDVWQQrdZ1QQcmdZViewItem)
question is, how would these work.? would the h.i.d only work on the outside lamps? i dont plan on using the inner lamps anyway.
sorry to sound silly but get confused of which low/high/dipped beam is so....... would i still be able to use dim beam with 1 turn of the stalk and then bright beam with the second turn? also will i still be able to use flash by pulling the stalk..?
Duncan Grier
28-09-2008, 19:08
Minty_83 just fitted them with HID's not long ago - drop him a pm ;)
Minty_83 just fitted them with HID's not long ago - drop him a pm ;)
cheers mate, just pm'd him:agree:
You just put single main 'bright' beam bulbs in the inners.
The loom should couple them to the main beam at the outer lamps.
They all work together with your normal main/dip control.
EmmaB510
29-09-2008, 10:29
I'm also doing this :) I'm only changing the outer lights, inner one is only full beam and i've only got one ;)
could someone explain to me what is which:confused::ashamed: im always getting confused with all this dipped/main/side/flash stuff:confused:
is this right:confused:
sidelights= 1 twist[small bulb]?
main beam= 2 twists[big bulb]?
dipped= pull[big bulb]?
sure it was mention that with some h.i.d kits depending on which you get you loose the sidelights or something:confused:
Am i right in thinking the twin headlights take H4 but what bulb goes into the other light ? Need some bulbs for mine but the cars at the sprayers so cant see what bulbs i need. Cheers
Yes H4 is outer.
Inner may be H1 or H7.
I have 5gtt morrettes a few meters away. Maybe I'll get up and have a look to see if theres an inner bulb.
Last week I also was looking at getting a pair of HID. I've lost the link though.
Also i plan to fit a H.I.D conversion kit.! does this seen ok ->
http://cgi.ebay.co.uk/Hid-Xenon-Conversion-Kit-H4-HI-LO-BI-XENON-6000K-55-W_W0QQitemZ160287884974QQihZ006QQcategoryZ72235QQs sPageNameZWDVWQQrdZ1QQcmdZViewItem (http://cgi.ebay.co.uk/Hid-Xenon-Conversion-Kit-H4-HI-LO-BI-XENON-6000K-55-W_W0QQitemZ160287884974QQihZ006QQcategoryZ72235QQs sPageNameZWDVWQQrdZ1QQcmdZViewItem)
There are quite a few brands / makes on eBay for various prices.
Hard to tell what the quality is like.
Would the option to be able to replace bulbs be a good one? Some of them look rather permanently wired.
The above and one other claim to be 55 Watts instead of 35 watts. Maybe that's true?
Yes H4 is outer.
Inner may be H1 or H7.
I have 5gtt morrettes a few meters away. Maybe I'll get up and have a look to see if theres an inner bulb.
Thanks, just bought my HID kit off eBay £60 :)
its all about the H.I.D's
Which kits did you two buy?
We need to establish the good from the chaf.
could someone explain to me what is which:confused::ashamed: im always getting confused with all this dipped/main/side/flash stuff:confused:
is this right:confused:
sidelights= 1 twist[small bulb]?
main beam= 2 twists[big bulb]?
dipped= pull[big bulb]?
sure it was mention that with some h.i.d kits depending on which you get you loose the sidelights or something:confused:
side lights = little bulb, very dull one for twilight.
dipped beam= normal big bulb, i.e around town at night
main beam= brightest light, the one with the little blue dash light. (dazzle everyone)
Never even thought about these lights until I saw them on someones 5 at ND, a black 5 with morettes, audi tt engine, think he said 340bhp..... Anyway they looked the nuts.
Wouldnt mind some for my normal headlamp housing, i.e non morettes.....
Which kits did you two buy?
We need to establish the good from the chaf.
got mine from hid world mate, seem very good, no wire cutting, just plug and play!:D:D
Which kits did you two buy?
We need to establish the good from the chaf.
I bought this one : http://cgi.ebay.co.uk/Bi-Xenon-HID-Conversion-H4-Flex-H-L-6000K-Slim-Ballast_W0QQitemZ270281266453QQihZ017QQcategoryZ72 235QQtcZphotoQQcmdZViewItemQQ_trksidZp1713.m153.l1 262
I bought a kit off this person for my 206 about 18 months ago and they were still going strong when i sold it in April. So ive bought the kit in the link for the Reno.
I have 5gtt morrettes a few meters away. Maybe I'll get up and have a look to see if theres an inner bulb.
It appears that the inner is H2.
what about the std set up on the morettes? i mean is it -
sidelights being the inner lights & dipped/main being the outter?
ive sacked the 1st hid link i put up as there the old type, ive been looking at the new slimline types -
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=230296805071&ssPageName=STRK:MEWA:IT&ih=013 (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=230296805071&ssPageName=STRK:MEWA:IT&ih=013)
iv got the slim line version too, just make sure you get the hi/low version:)
iv got the slim line version too, just make sure you get the hi/low version:)
minty, can you tell us how yours operate via the stalk.?
what about the std set up on the morettes? i mean is it -
sidelights being the inner lights & dipped/main being the outer?
ive sacked the 1st hid link i put up as there the old type, ive been looking at the new slimline types -
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=230296805071&ssPageName=STRK:MEWA:IT&ih=013 (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=230296805071&ssPageName=STRK:MEWA:IT&ih=013)
Are these 35 Watts? The others claimed to be 55 Watts. Can't actually tell what this vendor is selling.
Side lights are the tiny little 5 watt bulbs that are pushed into the outer morettes under the H4 bulb.
The inner pair of lamps are another main beam.
The inner pair of lamps are another main beam.[/quote]
H2 bulbs on the inner
Are these 35 Watts? The others claimed to be 55 Watts.
Side lights are the tiny little 5 watt bulbs that are pushed into the outer morettes under the H4 bulb.
The inner pair of lamps are another main beam.
A standard H4 bulb is 55w / 60w and the HID's are 35w this is the power consumption but due to the higher voltage it can generate from the ballasts the more heat hench the cleaner light they discharge.
You haven't been paying attention :)
Raj's first link is to 55 Watt HID.
You haven't been paying attention :)
Raj's first link is to 55 Watt HID.
Yeah didnt bother looking at the link sorry, but the watt is only the power that the ballast pulls and standard wiring will be good for 80w. If you want a more powerful light you want the higher K output, but 6000K was about right when had them.
No, Kelvin is the colour temperature not the power rating. Higher Kelvin = LOWER light output.
The bulb is the load and pulls the 'power' not the ballast. :) Although there will be some wattage used by the electronics as current is turned into heat.
ive got my morettes but im in need of a pair of the back plastics.!
i recall on the old rtoc site someone posted up a blown diagram of the r5 morettes which i think included the part numbers?
does anyone have anything like this to hand? just require the back plate/plastic part no's.
no worries, have found the part no's here - http://www.e-styling.co.uk/scpro/estyling/sparepdfs/0-Nt-RE-881-PJ%20-%20Renault%205.pdf (http://www.e-styling.co.uk/scpro/estyling/sparepdfs/0-Nt-RE-881-PJ%20-%20Renault%205.pdf)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.