injectors???

[steveR5GTT]

hello all, just gettin the 172 turbo r5 bk out of the garage after 3 years of being tucked away, new clutch, flywheel, gearbox, 16 new valves, pair of cams, head gasket, head bolts and cambelt to list a few things since my last trip to the pod lol, thing is im goin to be lookin at having a remap and goin for around the 300hp figure (currently at 255hp last time it was rr)

i was told told the injectors i currently have are at there max so will be in the need of a larger set before i do anything, i have been told siemens injectors are very good to have but when lookin on ebay to get a rough price of what these are going to cost they have low and high impedance ? whats the diffrence between these and more importantly whats the better option to have ?

cheers

[Ashy]

Which ones are you currently using, I have the cossie dark greens 380cc and they are maxed out at a similar power level. I am looking for the next size up too :)

[clee]

You need to know which type you are running on the car at present .Easy enough to measure .
It's to do with the heat that they generate and what affect that has on the ECU ..

http://sdsefi.com/injectors.htm

I can run either on the Adaptronic .I'm on the lookout for some for the new GTA V6 at a reasonable cost .There are also better spray patterns to look out for .The newer generation ones have 4 spray the older like the 803 are single .
Best value I've found so far 440cc ..He sells in sets of 6 but the 8 are only £20/30 more
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=390088649696&viewitem=&sspagename=STRK%3AMEWAX%3AIT

[steveR5GTT]

ashy: not sure on the make or size of injectors in sit. at the mo but ill b down the garge this week so will look then, i for sum reason remember sumit bout 440cc injectors and was needing bigger, im running high comp of 9.5:1 and only 6.5psi with emerald m3dk ecu management system so slightly diff set-up to yours mate but still similar power out puts

cheers clee ill hav a look at and have a good read up ;)

[Os8472]

I'm running 440cc jobs and I'm no where near maxing them out, infact mine are way to big but I have to sets, may sell a set if your interested

[steveR5GTT]

ok just been out the the garage have been to busy past week or so to get out there and i cant see a make on them but they are lightish blue in colour and have these numbers on tem if these mean anyting to any1 ?

957
280150985
187

any1 wlse able to shed sum light on to what size these are ?

cheers

[sieger]

0280150985 399cc @ 3 bar 14.5 OHM

[steveR5GTT]

rite so far ive found a chat with what i can find most info out on and this is what ive found so far which to me means nothing as i aint got a clue what it all means lol

they are bosch 280150985's
flow of
lbs/hr 36.63
cc/min 385
grams/min 276.0

rating of
chart had no info on this part for these injectors

.52 bsfc - est hp duty cycle
80% 56.4
95% 66.9

and that they are high impedance

ive been advised to go for siemens low impedance, can the car run low impedance with a remap or will it have to stay high impedance injectors ?

[steveR5GTT]

0280150985 399cc @ 3 bar 14.5 OHM
cheers fella ;)

[steveR5GTT]

just found this so thought id post it up as mite help others

http://www.polog40.co.uk/article_injector_table.php

[clee]

http://www.rtoc.org/files/?path=Technical%20Files/Fuel%20Injector%20data/

[allanr5gtt]

as we're talking about injectors how do you know if your running high or low impedance? i'm using 380cc part no mjy10023 from the research i have done i think they are rover tomcat injectors the same as ford 803. i also read on another forum that my ecu dta e48 exp doesn't like to run on low impedance.

so the question i ask is
are mjy10023 injector high or low impedance?
does the e48exp use high or low impedance injectors?
are mjy10023 rover tomcat injectors?

thanks allan