4 pot calipers 13" wheels

[robw]

New poster! (less than 10 posts)

has anyone got 4 pot calipers on their 5 with 13" wheels?
i would like to have that setup as i have cup wheels but i have only found 4 pots for 15" or bigger wheels so far..

[Billy-G]

It can be done, I know because I've seen it. I think they were a kit off an old school Mini or something.

Didn't do the car much good mind. I saw the car in a scrappy, with the steering wheel sticking out the sunroof.:(

Not. Good. At. All.

[Sparkie]

my guess it a metro turbo, as they used 4 pot calipers.

also austin princess/ambassador used em too.

[Woznaldo]

First post!

Didn't Willwood do a 4 pot kit with 255mm dia discs that fit under 13" wheels? Porbably not made anymore so you'd have to find a used set. Try Willwood anyway.:)

[Woznaldo]

New poster! (less than 10 posts)

There you go:;)

http://www.rallydesign.co.uk/product_info.php?cPath=562_563_572&products_id=3977

[Andrew Cooke]

you might struggle to get anything other than a single pot sliding caliper under a standard steel wheel. There just isn't enough space for the pistons on the outside. Have a measure how much space you have between the disk face and the wheel, then look at some caliper drawings.

[Andrew Cooke]

http://www.wilwood.com/Products/001-Calipers/020-BDL/mounting.gif

[robw]

New poster! (less than 10 posts)

some good info here.thanks.The link for the Dyn 2 calipers look promising.i think that is a 2 pot.might be worth considering though.