help gtt fuel pump to run f7p

[mr white]

is 5 gtt fuel pump capeable of running the f7p, and would i just conect up the fuel pipes from the gtt engine bay to the fuel rail on the f7p minus the 5gtt fpr.
also,the wiring on the 5gtt ecu/tdc activates the fuel pump when ignition turns on priming it how is this done with the f7ps loom, is this correct?

[Scoff]

Phase 2 gtt pump will not be big enough, the Phase 1 or an uprated type should be OK.

The gtt has a fuel pump relay behind the dashboard that responds to the tachometer signal that comes from the AEI (ECU/ignition module). The same signal is fed to the tacho on the dashboard.

F7P uses it's own fuel pump relay in the engine loom, you will need to wire this to the fuel pump instead of the gtt's own fuel pump relay.

[mr white]

Phase 2 gtt pump will not be big enough, the Phase 1 or an uprated type should be OK.

The gtt has a fuel pump relay behind the dashboard that responds to the tachometer signal that comes from the AEI (ECU/ignition module). The same signal is fed to the tacho on the dashboard.

F7P uses it's own fuel pump relay in the engine loom, you will need to wire this to the fuel pump instead of the gtt's own fuel pump relay.

right i have a phase 1(larger body) pump in std position

so i need to run a wire from the F7P fuel pump relay in the engine loom to the gtt pump is that right
and to get the rev counter i need to run a wire from the f7ps loom to the gtt loom where the re209 is

[mr white]

also can i run the gtt rad with the f7p? is it big enough? as mine is brand new, the inlet out lets are in the same places:)

[James5]

also can i run the gtt rad with the f7p? is it big enough? as mine is brand new, the inlet out lets are in the same places:)


Scoff run's one with his F4r 172 turbo so it must be ok.

[mr white]

cool so thats all good with the rad going to get some paint made up now so i can give the engine bay a fresh coat before the engine goes in:)

[mr white]

right ive disconected the engine loom from the clio f7p/engine ive got 2 loom plugs on the passenger side of the engine bay a brown one and a clear one. any body got the wiring diagram for the clio or know which wires i need to mate up to the gtt loom.
if not i log it down for future people doing it, but still need a wiring diagram if anybody has one please.