View Full Version : spooky
breakdown
06-10-2009, 20:43
he sold me a turbo for 230 and it didnt work try to talk to him and sort out the problem but will not reply
breakdown
06-10-2009, 20:44
:mad:
Doesn't sound like spooky
You sure its spooky? what you mean it didnt work?? turbos dont just not work....
Run through how you fitted it. step by step:)
breakdown
06-10-2009, 20:53
got loads of emails where i try to sort it out with him even said i send it back and let him have a look and see if he knows why its not workin still got it sitting here now
breakdown
06-10-2009, 20:55
abs turbos put it on for me would not boost at all put my one with the seals gone boost fine and dave t2 off here one work fine
Did you chek for boost leaks? have evrything set.. its not far to big for your set up is it?:crap:
The new Bill J
06-10-2009, 21:00
Maybe it sucked up some punctuation, which has got stuck and jammed the wastegate open! :crap:
breakdown
06-10-2009, 21:01
its fine for my set up just want something sorted mate i gave the money with no problems and sitting here now with a turbo not workin and 230 short in my pocket feel a bit mug off if he would talk to me than could sort something out
Maybe it sucked up some punctuation, which has got stuck and jammed the wastegate open! :crap:
lol bill yes LOL
TrixNFlix
06-10-2009, 21:02
Maybe it sucked up some punctuation, which has got stuck and jammed the wastegate open! :crap:
Bill :dearme: :D
breakdown
06-10-2009, 21:03
i be glad to give it to anyone on here to look at it or even try it if ur turbo is on its why out but know u will have the same problem as i try it on my mates car to
TrixNFlix
06-10-2009, 21:04
Hopefully spooky will come on hear and we can here his side. What did abs turbos say about the turbo, mr breakdown
car.crash
06-10-2009, 21:04
why is it people always take sides before hearing it all out. give the bloke a chance and let spooky box his own corner.
i be glad to give it to anyone on here to look at it or even try it if ur turbo is on its why out but know u will have the same problem as i try it on my mates car to
has the shaft snapped. hold the comp wheel and try and turn the exhaust wheel it shouldnt turn if your holding one side of it
why is it people always take sides before hearing it all out. give the bloke a chance and let spooky box his own corner.
People bar one were asking questions to asertain wether it was fitted correctly if not help could be given. not a dig.... and not taking sides
breakdown
06-10-2009, 21:09
not got a problem with him just want it sorted dont want people taking sides just want it over and done with not trying to start trouble just feel mug off a bit since it comes across that hes not welling to try and sort it out with me
TrixNFlix
06-10-2009, 21:10
why is it people always take sides before hearing it all out. give the bloke a chance and let spooky box his own corner.
I dont think anyone is taking anysides car.crash, bill is just being bill with his tick for punctuation, and im laughing at him. I dont even know spooky, just want to get to the problem and sort things.
can you check the shaft please
A more in depth explanation as to what's happening would help. The fact ''it doesn't work'' means nothing.
The new Bill J
06-10-2009, 21:15
I'm taking sides :agree:
Well, I'm taking a side. I'm going to take the left side, and put it on the right side, so then it becomes the wrong side :scratch:
breakdown
06-10-2009, 21:19
it dont boost at all with the turbo on as if its not got a turbo on the engine
it dont boost at all with the turbo on as if its not got a turbo on the engine
does it sound like its trying to boost?
TrixNFlix
06-10-2009, 21:20
it dont boost at all with the turbo on as if its not got a turbo on the engine
Any smoke, oil from anywhere?
Is the actuator plumbed up and attached to the wastgate?
does the shaft spin freely by hand ? doesn't look bent or catching the housings ? and is the wastegate closing all the way ?
what type of turbo is it ? it's not just laggier than you expect ?
I'm taking sides :agree:
Well, I'm taking a side. I'm going to take the left side, and put it on the right side, so then it becomes the wrong side :scratch:
What happens with the right side though after you put the left side in it? :confused:
breakdown
06-10-2009, 21:29
if anyone on here got a blow turbo than ur welcome to try this one as it wont smoke its a t25
breakdown
06-10-2009, 21:31
and the turbo i borrow of my mate at the moment is much bigger and is fine :scratch:
If it's not boosting, the wastegate could be open prematurley and bleeding off the exhaust gas before it hits the turbine wheel. You just need to shorten the actuator rod in that case. The penny should be clamped against it's seat firmly
breakdown
06-10-2009, 21:34
just spoke to abs turbo and he said he check the wastegate
TrixNFlix
06-10-2009, 21:37
just spoke to abs turbo and he said he check the wastegate
Did the guy at abs turbos have an opinion of what was wrong with the turbo?
breakdown
06-10-2009, 21:41
that the rear blades could be the problem
TrixNFlix
06-10-2009, 21:45
ahh ok, so if you look in the back housing do the blades from the wheel look like the've scraped the sides? if you wiggle the back wheel does it get stuck on the housing sides?
Literally just replied...
Hi
I sold you a working, boosting turbo. It was literally taken off my car the morning I posted it out, it was still warm in the packaging!!!
I have offered to help and have given you advice on what to look at and try etc
Why would I sell something, of whatever value and know it didn't do what it's meant to do ?
I've sold numerous parts, body panels, engine parts, turbos...no one has had any issues and if they did, Ive usually helped them out as much as I could.
I don't know if you've been unfortunate enough to have had it damaged in the post or during any handling. That's something I can't control.
Sukhi
breakdown
06-10-2009, 21:52
will have it all check again tomorrow by abs turbo would go now but leg is in plaster
Where are you in North London?
Just bring it down to our workshop in Brentford and i'll have a proper look at it.
breakdown
06-10-2009, 21:57
nice one mate are u about thursday morning where abouts
that the rear blades could be the problem
I'd be getting a second opinion...
Take Adam up on his kind offer - He'll see you alright :agree:
Duncan Grier
06-10-2009, 22:03
Sounds like a group hug is due :P
If no obvious signs of damage and trying things already asked I would suspect actuator adjustment could be needed ;)
DG
breakdown
06-10-2009, 22:06
all of the above has been try will pop and see adam
Duncan Grier
06-10-2009, 22:10
As Mart has said Adam will look after you ;)
You'll have to leave it with me if you come on Thursday morning as I won't have the time to look at it straight away.
breakdown
06-10-2009, 22:12
cool will have some answers thursday i hope
breakdown
06-10-2009, 22:13
okaymate pm with address
breakdown
06-10-2009, 22:16
thanks adam
5alldaway
06-10-2009, 22:22
thanks adam
what about the ants?
I'm taking sides :agree:
Well, I'm taking a side. I'm going to take the left side, and put it on the right side, so then it becomes the wrong side :scratch:
Try taking it to the............. Dark side, you never know
Me can't believe dat you is not on the .............
http://i383.photobucket.com/albums/oo275/jelliejam79/Ali20G20-20West20Side.jpg
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.