Lambda Sensor Position

[Arrows]

How far from the turbo elbow can i position my lambda sensor, want to drill and fit and install my wideband sensor but want to make sure its far enough away from the turbo.

Sorry if this has been asked before.

[Adam L]

Just before the bend in the downpipe is the most common place.

[Arrows]

Just before the bend in the downpipe is the most common place.

So along from the elbow it then bends down, fit it on this first bend, yes?

I can mount it so the sensor is at the 12 ' clock location there as well.

[Kris M]

It shouldent be at 12 oclock, should be mounted approx 10 or 2 oclock

[Adam L]

Close your eyes and drill a hole, that should work:).

[r5 rich]

http://www.bigjimracing.co.uk/images/21082009668.jpg

[Arrows]

It shouldent be at 12 oclock, should be mounted approx 10 or 2 oclock

I thought it had to be between 10 to 2?

[Arrows]

http://www.bigjimracing.co.uk/images/21082009668.jpg

Thats closer to the turbo then i thought you were meant to position it, thanks.