PDA

View Full Version : door cards


price82
06-09-2009, 22:10
any one any idea where you can get some decent phase 2 front door cards either new ones from renault??? or the cool looking carbon fibre ones? or anything else anyone has seen that are good?
Shane P
06-09-2009, 23:29
http://www.gt-turbo-spares.co.uk/

www.cgbmotorsport.net (http://www.cgbmotorsport.net)

Both very helpful people :agree:
DK DEVELOPMENTS
06-09-2009, 23:42
any one any idea where you can get some decent phase 2 front door cards either new ones from renault??? or the cool looking carbon fibre ones? or anything else anyone has seen that are good?

Why don't you try carbon fibre pannels like the ones on mine

car in pic's is mine speak to Mike and say Danny sent you

http://www.performance-trim.com/product.php?product_id=31&category_id=20
markey b
07-09-2009, 14:41
Why don't you try carbon fibre pannels like the ones on mine

car in pic's is mine speak to Mike and say Danny sent you

http://www.performance-trim.com/product.php?product_id=31&category_id=20

is it me, or dont they seem to fit the whole width?
Junglist
07-09-2009, 15:26
Why don't you try carbon fibre pannels like the ones on mine

car in pic's is mine speak to Mike and say Danny sent you

http://www.performance-trim.com/product.php?product_id=31&category_id=20

how do you pull the door shut on them
Penfold aka The Dealer
07-09-2009, 15:52
New there about £185 + vat each...
Sangin
07-09-2009, 17:50
New poster! (less than 10 posts)

On here they are as listed below m8, same company:

http://cgi.ebay.co.uk/Renault-Clio-or-5-Carbon-Fibre-Door-cards-NEW_W0QQitemZ220476022092QQcmdZViewItemQQptZUK_Car sParts_Vehicles_CarParts_SM?hash=item3355651d4c&_trksid=p3286.c0.m14
DK DEVELOPMENTS
07-09-2009, 19:51
is it me, or dont they seem to fit the whole width?

They don't go right to the edge as there would be a gap between the pannel and door. The pannels follow the shape of the raised lip.
pic of door with no pannel.

http://www.rtoc.org/boards/picture.php?albumid=456&pictureid=4571
DK DEVELOPMENTS
07-09-2009, 19:57
how do you pull the door shut on them

I didn't like the idea of a cord or handle so I cut and filed holes in the front section of the orginal handles, just big enough to put two fingers in.:eek:
rs250nut
07-09-2009, 20:00
http://www.performance-trim.com/product.php?product_id=31&category_id=20[


Thata a nice cage you got going on there, does it pick up on the front strut tops? Is is the multi point omp jobbie?
DK DEVELOPMENTS
07-09-2009, 20:25
http://www.performance-trim.com/product.php?product_id=31&category_id=20[


Thata a nice cage you got going on there, does it pick up on the front strut tops? Is is the multi point omp jobbie?

custom made cage tri-anglated to the struts and through the floor in the rear to the chassis.