PDA

View Full Version : Help Please !!!!


toby
05-09-2009, 19:58
hello i could use some help please. i have a r5 gt turbo and have rebuilt the engine, i need some help with the wiring. its all connected correctly as far as i know however it wont crank over.

i really need some help from someone who knows the wiring inside out. i live in birmingham in the castle bromwich area

if you live in the area please phone me 07595701236 if you would like to help

thankyou
price82
05-09-2009, 19:59
i guess when you say wont crank you mean the starter motor is not turning the endine so obvious question have you checked the connections to the starter motor?
toby
05-09-2009, 20:04
well i think so yes but still nothing.
Bass J
05-09-2009, 21:26
yo brendan ..it may be your tdc sensor? ..check your connections ..the solenoid wire(for the starter) also ;)
toby
05-09-2009, 21:33
where does the solenoid wire go from the starter motor

this isnt brendon but one of his mates i will tell him u said hi tho
Bass J
05-09-2009, 21:37
solenoid wire comes from the connector block from the dash loom to the engine loom ..it should be a thick white wire (im going from my clio gtt conversion btw it may be different) it should have a spade type connection on it ;)
Markey Mark (BD)
05-09-2009, 21:38
The solenoid wire goes from the starter to the connector under the header tank (main plug for engine wiring loom), these do cause some problems.

Worth checking if you have 12v going to the starter, if not start from there and work back if you have then it looks like starter problem
toby
05-09-2009, 21:43
wicked i will check that in the morning. bloody old enignes do my head in lol

thankyou
IANMM
06-09-2009, 14:22
Hey mate....try tapping the starter motor with a hammer as you turn it over as it can stick after being in and out....call me on 0754 1226673 if you need help as im only up the road bud and i know the wiring inside out
toby
07-09-2009, 15:20
Hey mate....try tapping the starter motor with a hammer as you turn it over as it can stick after being in and out....call me on 0754 1226673 if you need help as im only up the road bud and i know the wiring inside out

Cheers matey. Never got a chance to look at it but will give you a call if I get stuck. Thanks.