Renault Clio Williams Ph2: Restoration Underbody

The whole body of this Clio Williams is very well preserved.
No serious rust spots or rust holes were found.
First, all attachments were removed from the underbody.

https://imagizer.imageshack.com/v2/6...924/JhlpCB.jpg

Only harmless, brown rust spots were found, such as here…

https://imagizer.imageshack.com/v2/6...922/aZ9UuR.jpg

… and rusted shielding plates of the exhaust system or rusted screws.

https://imagizer.imageshack.com/v2/6...924/qzkCDx.jpg

The rear axle was removed.

https://imagizer.imageshack.com/v2/6...921/aeM0el.jpg

https://imagizer.imageshack.com/v2/6...923/XsEY0m.jpg

The fuel tank as well.

https://imagizer.imageshack.com/v2/6...921/RXkC6p.jpg

At the lift points on both threshold, there was most work.
Either the points were deformed by improper lifting of the car, or even injured so far, that the rust could eat the plate.
Nevertheless, the repair was no big deal at these places.

https://imagizer.imageshack.com/v2/6...922/VpD91O.jpg

https://imagizer.imageshack.com/v2/6...922/V1H1BN.jpg

https://imagizer.imageshack.com/v2/6...923/NmQFKE.jpg

After repairing all rusty spots, the bare areas were treated with Brunox.

https://imagizer.imageshack.com/v2/6...921/7Fg1qo.jpg

https://imagizer.imageshack.com/v2/6...924/t2moRn.jpg

https://imagizer.imageshack.com/v2/6...924/lJnma2.jpg

https://imagizer.imageshack.com/v2/6...922/upuU6c.jpg

Thereafter, these places were primed.

https://imagizer.imageshack.com/v2/6...921/LLQksL.jpg

https://imagizer.imageshack.com/v2/6...923/z3Ttld.jpg

https://imagizer.imageshack.com/v2/6...921/T4juif.jpg

https://imagizer.imageshack.com/v2/6...924/C6he0p.jpg

All sheet edges / transitions were also cemented after priming.

https://imagizer.imageshack.com/v2/6...923/ymtPtA.jpg

https://imagizer.imageshack.com/v2/6...924/Pn2MVb.jpg

https://imagizer.imageshack.com/v2/6...924/pHhASf.jpg

Next, colored, overcoatable underbody protection was used to simplify the subsequent painting in the body color.

https://imagizer.imageshack.com/v2/6...924/2mBmC9.jpg

https://imagizer.imageshack.com/v2/6...921/wFYdCf.jpg

https://imagizer.imageshack.com/v2/6...923/2a7vme.jpg

Now the entire underbody could be painted in body color.

https://imagizer.imageshack.com/v2/6...923/UTMgD6.jpg

https://imagizer.imageshack.com/v2/6...921/McImlE.jpg

https://imagizer.imageshack.com/v2/6...924/K98VkH.jpg

https://imagizer.imageshack.com/v2/6...923/9NTVEk.jpg

https://imagizer.imageshack.com/v2/6...923/lUDcSA.jpg

https://imagizer.imageshack.com/v2/6...923/hCOYLr.jpg

https://imagizer.imageshack.com/v2/6...923/uxAcKm.jpg

All steel parts of the underbody were blasted, black powdered or black passivated.

https://imagizer.imageshack.com/v2/6...923/aJj7wN.jpg

The rear axle was assembled again.
Of course, all wearing parts and screws were replaced.

https://imagizer.imageshack.com/v2/6...923/MpyOq0.jpg

https://imagizer.imageshack.com/v2/6...923/ZjAA3g.jpg

The rear axle was mounted again.

https://imagizer.imageshack.com/v2/6...924/682xSs.jpg

New fittings are a matter of course.

https://imagizer.imageshack.com/v2/6...924/Wstd7i.jpg

https://imagizer.imageshack.com/v2/6...921/q0hD6k.jpg

Also in the interior again everything in original condition and sealed with foil.

https://imagizer.imageshack.com/v2/6...923/jUKaVy.jpg

The fuel tank was cleaned, and the hoses and clamps replaced.

https://imagizer.imageshack.com/v2/6...922/dX1qgh.jpg

The fuel tank was reinstalled.

https://imagizer.imageshack.com/v2/6...923/XPMMz4.jpg

https://imagizer.imageshack.com/v2/6...922/4hJKjd.jpg

The new handbrake cables were still mounted.
Also the brake lines, some of which had to be repaired. In addition, there were steel brake lines in blue.

https://imagizer.imageshack.com/v2/6...922/LSb11W.jpg

The rusted shields of the exhaust system were blasted, blue galvanized, and reassembled.

https://imagizer.imageshack.com/v2/6...924/t9TsZj.jpg

https://imagizer.imageshack.com/v2/6...921/t0Mq52.jpg

https://imagizer.imageshack.com/v2/6...924/TTzyn4.jpg

https://imagizer.imageshack.com/v2/6...922/E4KDou.jpg

The front shield in the center tunnel was actually still available from Renault.

https://imagizer.imageshack.com/v2/6...924/2JJaSt.jpg

Finally, the devil Group A complete exhaust system was mounted.

https://imagizer.imageshack.com/v2/6...922/vF730Y.jpg

Very good work. The underside was in good condition, what is the mileage of it? What other work will you be doing?

Quote:

---

Originally Posted by dickiegtt

Very good work. The underside was in good condition, what is the mileage of it? What other work will you be doing?

---

Thanks!
It have "only" 135000km.
I'm at a complete restauration. All.

Great thread! I'm doing the same to my 5 soon, although no where near as clean as that!

Quote:

---

Originally Posted by Matt Cole

Great thread! I'm doing the same to my 5 soon, although no where near as clean as that!

---

Thanks!
Nevertheless much success! especially in the parts procurement...