-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
Quote:
Originally Posted by
Scoff
OK rob, be a shame if you can't fetch it along but safety first !!
Yeah was looking forward to letting it have a stretch on dyno... lets see what roads like in morning.. im not going to rush to get there first thing, let roads clear a little.. saying that the main roads aint bad.. just with 1000kg of unbraked car pushing me isnt so good... :crap:
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
I'll be up first thing to look at the roads, but it's looking unlikely ATM.
Gutted:sad2:
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
Sorry I'm not going to be able to make it tomorrow, just taken me 1 hr 30 min to do a usual 30 min journey :crap:
Hope those that can make it have a great day :niceone:
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
Quote:
Originally Posted by
Big Steve - Raider
Sorry I'm not going to be able to make it tomorrow, just taken me 1 hr 30 min to do a usual 30 min journey :crap:
Hope those that can make it have a great day :niceone:
Snap - Sorry guys - have a good un, hope you can re-schedule if need be. Unlucky Scoff:sad2:
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
same here i've got about 4inches of snow outside and its still falling,
shame i was looking forward to this.
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
Well pussy boys my 5 is out on the road in the snow and believe me it's 3-4" deep off to weatherspoons for breakfast meeting Glenn Robbo stu Brookie Alex and Ollie so will deffo be seeing u at some point come on everyone it's only snow ;)
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
We are on our way but will not be down to 11.
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
Quote:
Originally Posted by
jaffa
Well pussy boys my 5 is out on the road in the snow and believe me it's 3-4" deep off to weatherspoons for breakfast meeting Glenn Robbo stu Brookie Alex and Ollie so will deffo be seeing u at some point come on everyone it's only snow ;)
;lmfa off Pussy boy - do 240 miles in it sucka :laugh: Then get back on the same day, but for those who do get there, have a good un, I hope it's a sucess for Scoffs sake.:smokin:
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
Drive safely people and enjoy the day!
Heres to a successful day Scoffski :agree:
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
damn work ...had to go in for a bit ... But hopefully there by 11 ishh ... :)
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
Give it a miss due to conditions, any power figures yet?
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
:agree:
Quote:
Originally Posted by
Lomo
Drive safely people and enjoy the day!
Heres to a successful day Scoffski :agree:
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
Just got back. Great little place you've got there Scoff, thanks for organising the day. Sorry I didn't make a notes of the power figures as I was busy chasing my son around! I'm sure they'll be posted up though.....
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
really sorry i didnt make it.. took almost 3 hours to shovel drive enough to get the mazda out.
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
Yet again another great Rtoc event great members and club ,good to meet new and old faces ,thanks Chris for the event great place you have ,and im sure you will do very well,thanks again peeps roll on next event and meet
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
Either everyone is in the pub or travelling home! :D
How did the day go?
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
Great day, good to see some faces etc... kinda in the mood now to sort my 5 out for Nat day... Civic has a problem but ran it anyway, 582hp @ 25psi... mega rich so more power to be made at this boost level... :) cheers Scoff....
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
0.9 lambda @ 6k+ rpm/full boost = Brave man! :D
Great figures though pal :agree: :cool:
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
leaning off at the very end? still 7 years of it and its fine. Fantastic setup :agree::agree::agree:
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
Yeah does start to lean frm 6k but I don't rev past 6 anyway not bad though for a carb that hasn't been played with for all those years and done 2200 track miles!! Thing is although it is going lean it still wants to make more power...but I don't need it.:)
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
Big thanks to those that braved the weather, it was pretty mild here as it turned out, great turn out considering so many people had pulled the plug. Got through 11 cars so thats better than I had expected :)
Gibbo did a sterling job with the pictures and I'll compile the results tomorrow ready for PFC. I think there was 4 GTT's that made over 200hp, one was tim's B18FT so 3 C1J's making great numbers.
We braved another degree of timing in Robbie Turbo ted's 16v turbo and managed 462hp @ about 8600rpm. I wonder if many people have fed that much power through a J series gearbox before ??
And thanks to those that helped out throught the day, it's much apreciated lads. :)
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
Wish i could of come for your First RR day, my 5 will be back on the road in a couple of months, i think another day would be brilliant spring/summer time. :agree:
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
Quote:
Originally Posted by
Scoff
Big thanks to those that braved the weather, it was pretty mild here as it turned out, great turn out considering so many people had pulled the plug. Got through 11 cars so thats better than I had expected :)
Gibbo did a sterling job with the pictures and I'll compile the results tomorrow ready for PFC. I think there was 4 GTT's that made over 200hp, one was tim's B18FT so 3 C1J's making great numbers.
We braved another degree of timing in Robbie Turbo ted's 16v turbo and managed 462hp @ about 8600rpm. I wonder if many people have fed that much power through a J series gearbox before ??
And thanks to those that helped out throught the day, it's much apreciated lads. :)
My pleaseure mate ... Glad i could be of help :)
Great day & was great to put some faces to names ;)
Gibbo
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
Nice one for organising a decent day scoff, top job well worth the 500mile round trip.
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
nice results
What kind of boost does tim's b18ft run?
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
Brilliant day today thanks chris, nice to finally go to my first event with the lads, i was really not expecting to make those numbers, sieger i made 228.2 bhp/204lb at 23 psi but started to drop on the 2nd and 3rd run due to getting hot, need to plumb my front mount in and re-route my airfilter.
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
Good day out ... Nice to meet some old faces and new .. Made 210bhp on first run then down to 207.5 at just under 25psi ... Seems to hit a brick wall at about 5300rpm for some reason...:scratch:
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
thanks for posting the vid jaffa:D has anyone else got any clips of my dyno runs, the camera i was using has deleted my video clips:crap:.
thanks to scoff for a great day worth the 380mile round trip in snow for the extra 11hp/10ft.last run on dyno made 462.3hp and 333.4ft.:D
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
Looks like some cracking figures where produced. :agree:
Your car has some good useable power there Jaffa without the need to rev to the moon. :smokin:
Well done Robbie another 11bhp in the tank. :D roll on the pod.
Hope my little upside down skip is on the road for the next one.
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
One of the clio lads took this of yours robbie:
http://www.youtube.com/watch?v=XO-XTPAbz0s
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
Missed a good day by the sounds of it! ******* snow! Som decent power figures there :)
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
looks like a great day and success chris really happy for you, wish i could of been there but i i explained via pm a couple weeks ago, id got a nice earner cash in hand job that i started last thurs and finished sunday.
certainly need another one of these sorting, maybe even have the big rtoc rr day at your place in october?
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
Quote:
Originally Posted by
BluntyR5GTT
certainly need another one of these sorting, maybe even have the big rtoc rr day at your place in october?
With all the experience and knowledge scoff has on our cars he is now the best place in the country to use for our rr days. He has the hands-on experience to diagnose the faults with fuelling etc. straight away, on the day he done extra runs just to diagnose a faults.
It was a great day and a very good setup, always good to catch up with all the old faces and hopefully some new ones.
Chris
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
well i have discussed it with chris via pm, and it looks like we will be having it at efi-parts this year :) will make an announcement soon
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
:agree::agree::agree::agree:
Quote:
Originally Posted by
BluntyR5GTT
well i have discussed it with chris via pm, and it looks like we will be having it at efi-parts this year :) will make an announcement soon
:agree::agree::agree::agree::agree::agree::agree:: agree::agree::agree::agree::agree::agree::agree:
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
ace day out nice to see my car again lol top job on manifold pal :D:D:D:D:D:D:D
when you all had gone put my van on made a extra 18bhp with a chip tuning box 20lbft torque ace for £80
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
Quote:
Originally Posted by
BluntyR5GTT
well i have discussed it with chris via pm, and it looks like we will be having it at efi-parts this year :) will make an announcement soon
Hope its later on in year when I finally break free of uni! Should have most of the north east crew back on four wheels!
Glad your first day went well scoff, really smashing you got set up. :agree:
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
Well done robbie (turbo ted) for the power its near producing...given all your effort you've put into it! And Yes i will pester you at every ace cafe meet until i get a ride :laugh:
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
Quote:
Originally Posted by
MATT C Ringworm Tuning
Hope its later on in year when I finally break free of uni! Should have most of the north east crew back on four wheels!
Glad your first day went well scoff, really smashing you got set up. :agree:
it will be around the same time as last years (october)
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
I may have to book mine in to get it setup with scoff. Gettin bored of mincing with it now.
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
Quote:
Originally Posted by
REGGY5GT
Brilliant day today thanks chris, nice to finally go to my first event with the lads, i was really not expecting to make those numbers, sieger i made 228.2 bhp/204lb at 23 psi but started to drop on the 2nd and 3rd run due to getting hot, need to plumb my front mount in and re-route my airfilter.
Good results there tim. What did you do with the bypass hole in the end?
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
Results from the day:
Tim B (REGGY5GT) R5GTT with B18FT, "E" CAM, T28, 23psi: 228 HP, 204 LB/FT
James F R5GTT C1J, CAM, T28, 20psi+: 228 HP, 218 LB/FT
Jaffa's T200, R5GTT C1J, T28, 21psi, "well screwed together!" 242 HP, 239 LB/FT
Paul G (Gibbo) R5GTT C1J, Hybrid T2, 10psi: 129 HP, 154 LB/FT
Alex M R5GTT C1J, 270 CAM, GT28R, 19psi ish: 190 HP, 192 LB/FT
Robbie (Turbo Ted) R5GTT F7P 16v, CAMS, GT35R, 30psi: 462 HP, 333 LB/FT
Daniel P Clio 172 Cup, K-Tec exhaust: 166 HP, 146 LB/FT
Tyler M Clio 182, RS Tuner map: 180 HP, 156 LB/FT
Ranj D R5GTT C1J, GT28R, 25psi, CC: 210 HP, 193 LB/FT
Richard W Skoda Octavia VRS, Custom map: 203 HP
Rob@ backyardracing Honda Civic B18 16v, 72mm BW turbo, big spec, 25psi: 582 HP
Glenn HI5 Renault van, diesel tuner box, 92 HP !!
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
do i get a prize for lowest bhp figure lol
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
shows how much tuning our car still needs, as it was rich at 25psi, and made 582hp
and at better fueling at, it made 502hp at just 17psi
only picked up 80hp from 8psi, should be nearly double that :laugh:
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
Quote:
Originally Posted by
SCHWARTZ
Good results there tim. What did you do with the bypass hole in the end?
i made a bypass roughly 32mm in diameter schwartz, drove up to scoffs after fitting the saab reds the night before and as i hadnt adjusted the maf back down it was overfuelling terribly 10afr on normal driving, luckily Haz was at hand with the aid of scoffs multimeter and fuelling was near sorted within 5 mins:D, its a bit hunty on idle but thats due to not having my idle control valve fitted which im going to refit shortly, im on the search for more power now so currently in talks with chris...
-
Re: 5th Feb: EFI-Parts open day & "RWYB" rolling road day
Raising that rev limit would be a major help;)